Office Cabinet Assembly Instructions Product Dimensions: 18.90”L×15.75”D×41.34”H Please take a moment to read through the entire instruction booklet before assembly to familiarize yourself with this product. Once you feel ready to start, follow the instructions step by step and this should make this process as easy as we could make it for you.
WARNING CAUTION ! ADULT ASSEMBLY REQUIRED CHOKING HAZARD • This product includes small parts, sharp points and sharp edges in its unassembled state. Keep unassembled parts away from children under 3 years of age, and animals. SAFETY WARNINGS • Follow the information on the warnings appearing on table and on the carton. Do not remove warning label from cabinet. • Do not allow children under 3 years of age to use the cabinet. • Do not use substitute parts.
ASSEMBLY AT A GLANCE Please take a moment to read through the whole instruction booklet before assembly to familiarize yourself with this product. Once you feel ready to start, follow the instructions step by step and this should make this process as easy as we could make it for you. 1 12 3 5 14 2 6 13 9 7 4 10 8 This drawing is to give you an overall idea only of how this assembly will go together and does not replace the assembly instructions.
COMPONENT PARTS Please check that you have all the parts listed below 1 1. Top Panel ×1 2. Left Side Panel×1 3. Right Side Panel×1 4. Bottom Panel×1 5. Middle Support Side Panel×1 6. Top Drawer Front ×1 7. Drawer Back ×5 8. Drawer Left ×5 9. Drawer Right ×5 10. Drawer Bottom ×5 11. Drawer Front ×5 12. Top Back Side Panel ×1 13. Left Back Side Panel×1 14.
ASSEMBLY INSTRUCTIONS 1 Select A×30 and 2×1, 3×1. Position 2 in the left, position 3 in the right. Insert A×5 into the one side of the B CL, other A×5 into the middle of the B CL, other A×5 into the other side of the B CL.Insert B CL ×5 into the 2.Repeat the steps for B CR ×5 and the 3. A A B B CL CR A A A A A A A A A A A A A A A A A B B A A A B A B A B B B B A B A A B A A A 2 3 2 G Select 7×5,8×5,9×5, and G×20. Insert G×2 into the hole of the 8 into the 7.
ASSEMBLY INSTRUCTIONS 3 Select 10×5 ,11×5 , D×10, E×10, F×10. Install the 10 along the grooves on the both sides of the 8 and 9. Install the 11 on the 8 with the D, E and F. Repeat the steps for the 11 and the 9. Repeat for another Drawer×4. 9 7 F D 10 8 E D F 11 E 4 A Select A × 30, B DR ×5, B DL ×5. Put the Drawer upside down. Insert A×3 into the B DR into the 9 tightly. Repeat the steps for the 8.Repeat the steps for another Drawer ×4.
ASSEMBLY INSTRUCTIONS 5 Select 2,3,5,D×4, E×4,F×2. Insert D×2 into the 2 into the two sides of the 5 with the F×2. Insert the E×2 into the 2 into the middle holes of the 5.Repeat for the 3 and the 5. 3 D E D 5 D F F E 2 F D 6 3 Select 2,3,4,E×4,G×4,K×1. Install the 13 and the 14 into the K. Install the 13,14 along the grooves of the 2 and the 3.Insert one side of the 4 into the 2 with the E×2,G×2. Repeat for the other side of the 4 and the 3.
ASSEMBLY INSTRUCTIONS 7 1 Select the 1,the 12, D×4,E×4,F×4. Install the 12 along the grooves of the 2 and the 3. Insert one side of the 1 into the 2 with the D×2,E×2 and F×2.Repeat for the 1 and the 3. E D 12 D D F E F 3 D F F 2 8 H A A A Select the 4×1,the H×2, the I×2,the A×16. Put the cabinet upside down, insert the H×2 into the 4 with the A×8 tightly. Repeat for the I×2.
ASSEMBLY INSTRUCTIONS 9 A Select the 6,A×4, J×2. Insert one of the J into the 6 with A×2.Repeat for the other J. A J J 6 A J 10 Insert the J×2 into the 6 and 3. Insert the A×8 into the hole of the Lock with the Phillips Screwdriver like picture.
ASSEMBLY INSTRUCTIONS 11 Put the Drawers ×5 into the Cabinet.
ASSEMBLY COMPLETE CONGRATULATIONS, YOUR OFFICE CABINET IS COMPLETE! Page 11 of 11