Use and Care Manual

3
USE AND MAINTENANCE
Use on level surfaces only
Because this product needs assembly, it is prone to working itself
loose from time to time depending on the use. Please take the time to
check that all connections are still tight and working properly
Only clean using a damp cloth and mild detergent, do not use bleach
or abrasive cleaners.
Tufted Split Back Futon Sofa Bed
PART LIST
Assembly Instructions
1
Unfold 1 and turn it into a long sofa bed.
1 - Futon Assembly x1
2 - Front Leg x2
3 - Middle Leg x2
A
Select and lay flat 1
assembly and turn
over upside down.
Select 2 x2 and
4
A
insert leg post into
back hole in futon.
3
A
Turn clockwise
to hand tighten.
4
A
4 - Rear Leg x2
HARDWARE
3
Select 3x2, 4x2 and A Bolts x4,
Insert A Bolt into 3 Middle Leg and
4 Rear Leg ,then through hole in 3 and 4
A
2
A
then mount 3 and 4 to part 1
Assembly. Ensure
the leg orients to point
outward for proper support.
2
A
A - Bolt x8
B - Allen Wrench x1
Note:
To sleep - pull backrest
forward until it clicks to release
and then push backward to lay flat.
To Recline:
Lay flat to sleep, then pull up into
desired recline position.
Congratulations! Setup of your new
Naomi Home Futon is Complete!
2
B