secu r i t y TRIPLE HEAD LED SECURITY LIGHT the bright way to do home security. Client: Amazon PDS 540 File Information Client ID: 10163406 Packaging Description: IM Contact: Art window/Fanny ext:8236 Email: art-szo-design@testritegroup.com Colors: CMYK Division: T101P61Z01 File NO.: 20210145 Item NO.
What's in the box Light fixture Mounting bracket screw Mounting bar Rubber plug 2groups x2 x3 Mounting screw Wire nut Parameter 1 Illumination output: approx. 3500 lumens / 5000K 2 Wattage: 36W 3 Power source: AC120V/60Hz 4 Motion detection: up to 70feet (21.
Safety instructions 1. Please read all warning and instruction before attempting to install this light. 2. Disconnect power before installing or servicing. Warning Risk of Electrical Shock 1. Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply. 2. Make sure all electrical and grounded connections are in accordance with the National Electrical Code and applicable local code requirements. 3. All wiring connections should be compliant with UL standard.
Installation 1 Install the mounting bar to the outlet box with the stamped word "FRONT" facing away from the outlet box, use two mounting screws that best fit the outlet box. FR O NT (Choose one group of suitable mounting screws among two groups in the hardware pack) Note: For the best performance, install fixture at 5.9 feet ~11.5 feet (1.8~3.5m) above the ground.
3 Connect the source wires from the outlet box with the wires of the back plate using wire nuts as follows: Connect the white wire to white wire Connect the black wire to black wire Connect the Green wire to the house ground wire Note: DO NOT connect electricity before installation and maintenance 4 Place the back plate against the outlet box, insert the mounting bracket screw through the back plate hole, thread mounting bracket screw into the center hole of the mounting bar.
5 Attached the light fixture to the back plate using the center mounting screw: • Tighten the center mounting screw securely through the center of the light fixture. Do not overtighten. • Push the rubber plug firmly into the center hole to cover the center mounting screw. 6 Using silicone caulking compound, caulk completely around where the light fixture meets the wall surface to prevent water from seeping into the outlet box.
How it Works Adjusting the Lamp Heads and Motion Sensor 1. Swing the lamp heads to adjust the lamp head left and right or up and down to get the desired lamp direction. 2. Gently grasp the motion sensor and adjust the sensor left and right or up and down to get the desired sensor direction. 45º 35º 35º 70º 70º 100º 100º 90º 45º 90º 80º Product Function Description 1.
2. 4 Working Modes • Test mode: check the light’s sensory function in order to test the sensory range. The time duration for the light will be 5s. • Auto: when motion is detected, the light will turn on automatically for the time set (can choose 1, 3 or 7mins) at night.
Cleaning and Maintenance 1. Clean periodically with soft cloth. 2. Do not use any cleaners with chemicals, solvents or harsh abrasives on this light. Do not use scouring pads, powders, steel wool or abrasive paper. They could cause deterioration of the finish. FCC This device complies with Part 15 of the FCC Rules.
Register & Subscribe today to protect your investment and join our email list! Scan below for link: secu r i t y homezonesecurity.com support@homezone-usa.com Why Register? US: +1 888-782-5618 • Receive your extended warranty • Get professional warranty support • Be the first to hear the latest product news. • Get exclusive deals delivered to you email. Get exclusive offers and deals when you subscribe! Thank you for choosing Home Zone Security! We are here to support you every step of the way.
