TM TransPort User Guide
© 2000 Home Wireless Networks, Inc. All rights reserved. AirWay™ TransPort User Guide Part Number 84-xxxx-000 A0600 Home Wireless Networks, Inc. 3145 Avalon Ridge Place, Suite 200 Norcross, Georgia 30071-1582 The information in this manual is subject to change without notice and should not be construed as a commitment by Home Wireless Networks. Home Wireless Networks assumes no responsibility or liability for any errors or inaccuracies that may appear in this document.
Contents Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About AirWay TransPort. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Checking Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Getting Started About AirWay TransPort AirWay TransPort is a high-speed 802.11 wireless networking product that allows you to: 4 ■ Build a fast, flexible, secure Wireless Local Area Network (WLAN) in your home or small business. ■ Connect WLAN clients to an existing wired (Ethernet-based) LAN. ■ Easily add new computers to the network or move existing computers around without the hassle and expense of running new cables between the computers and a network hub.
Before You Begin Requirements Each computer in your TransPort network must have the following: ■ Microsoft Windows 95/98 ■ An AirWay PCMCIA or PCI card ■ A CD-ROM drive Checking Parts Your AirWay TransPort package contains the following items: ■ AirWay TransPort (1) ■ Power Supply Adapter (1) ■ 9’ Ethernet RJ-45 Cable (1) ■ Sheet of self-adhesive protective feet ■ AirWay TransPort CD-ROM ■ • Configuration Software • Online User Guide Printed User Documentation If any parts are missing
structures between TransPort and network computers, you will noticed degraded service. ■ Per FCC guidelines on radio frequency radiation exposure, this product should not be installed within 20 cm (7.8 iuches) of the user or other nearby individuals. ■ Do not install TransPort in the following locations: • Attics, garages, or other temperature-extreme locations • On top of or immediately adjacent to a TV, VCR, stereo system, or computer, or beside a window facing a street with heavy traffic.
6. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power that is supplied to your location, consult your dealer or local power company. 7. Do not overload the wall outlets or extension cords as this can result in the risk of fire or electric shock. 8. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by people walking on it. 9.
posted in the area so indicate. Hospitals or health-care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy. Battery cautions To reduce the risk of fire or injury to persons caused by batteries, read and follow these instructions. 1. Use only the proper type and size batteries. 2. Do not dispose of batteries in a fire. The cell may explode. Check with local codes for possible special disposal instructions.
Installing TransPort 1 Record the TransPort serial number. You will need this information during the software installation process and for configuration purposes. The serial number is located on the label beneath the cover. Refer to the accompanying illustrations for information on removing the cover and locating the serial number. Be sure to replace the cover after recording the serial number.
modify to show slice 3 Connect the Power Adapter to the TransPort module and plug the Adapter into a standard 120V electrical outlet. get illustration 4 10 If connecting to a wired LAN, connect the provided Ethernet cable and plug it into a nearby Ethernet jack.
Adding Computers To The Network To add a computer to your AirWay network, you must complete the following steps: 1. Install network card (PCI or PCMCIA) 2. Install TransPort drivers and software Note: You may be asked for your Windows CD-ROM during software installation. To prevent software conflicts, be sure to use the same version of Windows that is currently installed on your computer.
7. Install the TransPort drivers and software. Installing a PCMCIA Card Use the following procedure to install a PCMCIA card in a laptop computer. 1. Turn off your laptop. 2. Insert the AirWay PCMCIA card into the card slot on the laptop. 3. Turn the laptop back on. 4. Install the TransPort drivers and software. Installing the TransPort drivers and software When you turn on your computer, Windows automatically detects the new AirWay card and asks for the drivers. 1.
Note: The last eight digits of the TransPort serial number is your network SSID (Service Set Identifier). All computers in the network must have the same SSID. 3. Follow the on-screen instructions to finish installing the TransPort software.
Managing Your TransPort Network You can perform system administration and configuration from any computer in the network. There are two types of system administration modes: Standard and Advanced. Standard Mode ■ Allows you to view the version and dates of your TransPort software driver, configuration utility and NIC firmware. ■ Allows you to view current link info. To access Standard Mode, right-click on the TransPort icon in your system tray.
Regulatory Statements United States Information for general telephones 16 1. This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. 2. The applicable registration jack (connector) USOC-RJ11C is used for this equipment. 3.
company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. 7. If trouble is experienced with this equipment, for repair or warranty information, please contact the Home Wireless Networks Customer Service Center at 1-888-WHY-WIRE. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. 8.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Canada Equipment attachment limitations NOTICE: The Industry Canada label identifies certain equipment. This certification means that the equipment meets telecommuniations network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.
Interfence Information Operation is subject to the following two conditions: 20 1. This device may not cause interference 2. This device must accept any interference, including interference that may cause undesired operation of the device.
