Installation Guide

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Part List

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

Tools required for assembly : Phillips screwdriver

Hex Wrench

1 Pc.

Small Hex Wrench

1 Pc.

Head Cap Bolt

8 Pcs. (+1 extra)

Wood Screw

5 Pcs. (+1 extra)

Spring Washer

8 Pcs. (+1 extra)

Flat Washer

8 Pcs. (+1 extra)

88 5134 30

Concrete Chie

Dining Table

Table Top

1 Pc.

Stretcher

1 Pc.

Stretcher

1 Pc.

Leg

4 Pcs.

Tools recommended for assembly : Level

PAGE 1
88 5134 30 Concrete Chie Dining Table IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Table Top 1 Pc. C. Stretcher 1 Pc. B. Leg 4 Pcs. D. Stretcher 1 Pc. Hardware List Hex Wrench 1 Pc.
PAGE 2
Assembly Instructions 2 /2 IMPORTANT * Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Do not tighten up all the screws until each part is properly assembled. * Use a soft cloth between these parts and the floor. STEP 1 Place Table Top (A) upside down on a soft cloth. Attach Legs (B) to Table Top (A) with Head Cap Bolts, Spring Washers and Flat Washers. Tighten Head Cap Bolts only half way.