Instructions / Assembly

ManualsBrandsHome Styles ManualsCarts, Islands & Utility TablesDolly Madison Black Kitchen Cart

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com,

888-680-7460, 877-831-0319

Tool(s) required for assembly: Phillips screwdriver

Back Panel

2 pcs.

20 04506 0095

Kitchen Cart

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Small Hex Wrench

1 pc.

Hex Wrench

1 pc.

M6x30

Head Cap Bolt

12 pcs. (+1 extra)

M3.5x25

Wood Screw (long)

8 pcs. (+1 extra)

Adjustable Pin

4 pcs. (+1 extra)

M3.5x12

Wood Screw (short)

6 pcs. (+1 extra)

Handle

1 pc.

M4x25

Machine Screw

4 pcs.

Knob

2 pcs.

Side Panel

1 pc.

Top

1 pc.

Side Panel

1 pc.

Shelf

1 pc.

Back Rail

1 pc.

Front Rail

1 pc.

Drawer

1 pc.

Door

1 pc.

Door

1 pc.

Towel Bar

2 pcs.

Base

1 pc.

Cam Lock Screw

6 pcs. (+1 extra)

Cam Lock

6 pcs.(+2 extra)

Front Rail

1 pc.

Caster

2 Locking

2 Non-Locking

4 pcs.

Refer to later page(s) of these

instructions for drawer assembly.

Back Upright

1 pc.

Summary of content (6 pages)

PAGE 1
20 04506 0095 Kitchen Cart IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. C. Side Panel 1 pc. B. Side Panel 1 pc. F. Back Rail 1 pc. D. Back Panel 2 pcs. G. Front Rail 1 pc. E. Back Upright 1 pc. M. Drawer 1 pc. I. Base 1 pc.
PAGE 2
Assembly Instructions 2/5 IMPORTANT · Use a soft cloth between these parts and the floor. · Do not use power tools above 8 volts to assemble. · Do not tighten all the bolts until each part is properly assembled. · Keep Hex Wrench as the bolts may need to be tightened in the future. Cam Lock Screw STEP 1 B Insert Cam Lock Screws into pre-drilled holes of Side Panels (B) and (C), then tighten. (See Figure 1) C Figure 1 Head Cap Bolt STEP 2 Attach Base (I) to Side Panel (B) with Head Cap Bolts.
PAGE 3
Assembly Instructions 3/5 STEP 4 C Attach Front Rails (G) and (H) to unit with Cam Locks. Attach Side Panel (C) to unit with Cam Locks and Head Cap Bolts. G H Cam Lock Head Cap Bolt STEP 5 Non-Locking Caster Turn unit upside down. Locking Caster Attach Casters to bottom of unit, with Locking Casters at front.
PAGE 4
Assembly Instructions 4/5 Drawer (M) Wood Screw (long) Bottom M1 STEP 6 M3 Attach Drawer Front (M1) and Drawer Back (M2) to Drawer Side (M3) with Wood Screws (long). M2 M4 Attach Drawer Side (M4) to unit with Wood Screws (long). Roller at back STEP 7 Wood Screw (short) Slide Drawer Bottom (M5) into the grooves of Drawer Sides (M3) and (M4) until it meets Drawer Front (M1). M1 M3 M5 Attach Drawer Bottom (M5) to unit with Wood Screws (short).
PAGE 5
Assembly Instructions 5/5 A STEP 9 Head Cap Bolt Turn unit to its’ upright position. N Attach Towel Bars (N) to unit with Head Cap Bolts. N Attach Top (A) to unit with Head Cap Bolts. Insert Adjustable Pins into side panels at desired level. (See Figure 5) Place Shelf (J) into position. J Adjustable Pin Figure 5 Knob Figure 6 Figure 7 M Machine Screw STEP 10 K Attach Doors (K) and (L) to unit by sliding door hinges into side panel hinges.
PAGE 6
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.