Home NetWerks MEDICINE CABINET WITH BLUETOOTH® SPEAKERS SIMPLE SOLUTIONS FOR A SMARTER HOME MODEL #74-102-BT Español p. 8 The BLUETOOTH® word mark and logos are registered trademarks owned by BLUETOOTH SIG, Inc. and any use of the said mark by Homewerks Worldwide is under license. Other trademark and trade names are those of their respective owners. Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-319-3757, 8 a.m. - 5 p.m.
TABLE OF CONTENTS Package and Hardware Contents.......................................................................................................3 Preparation..........................................................................................................................................4 Recommended Tools...........................................................................................................................4 BLUETOOTH® Medicine Cabinet Installation Instructions..............
PACKAGE AND HARDWARE CONTENTS C B F D E G H A PART A B C D DESCRIPTION Medicine cabinet w/BLUETOOTH® Speakers Mounting bar Mounting clips Anchors www.homewerksww.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. • I t is important to make sure the medicine cabinet body is level and plumb upon installation. Use a level (not included) to ensure accuracy, or the door may not close and/or secure itself properly.
INSTALLATION INSTRUCTIONS 3. Rotate the medicine cabinet (A) for right or left door swing. Position the mounting clips (C) into the center channel and slide one left and one right as shown. Place and hold medicine cabinet (A) onto mounting bar (B). Mark hole locations for mounting clips (C). 3 4. Set medicine cabinet aside (A). Drill holes and insert anchors (D) for mounting clips (C). 4 5. Carefully lower medicine cabinet (A) into position on the mounting bar (B). 5 6.
A. NORMAL BATTERY CHARGING OPTION 1a. Join the male end of the power adapter (H) to the female connection in the BLUETOOTH® speaker on the side of the medicine cabinet (A). 1a 2a. Plug the cord into the closest GFCI outlet to charge speakers. Secure cord with double-sided foam tape (not included) if hanging below cabinet. B. HARD WIRE BATTERY CHARGING OPTION 1b. Power adapter cord (H) will be used for this installation method. 2a 2b.
PAIRING OF BLUETOOTH® DEVICE TO SPEAKER (CONTINUED) 5. F rom the Home screen, choose Settings > BLUETOOTH®, the device searches for Homewerks® speaker. NOTE: While your device can maintain multiple pairing records, it can only connect to one accessory at a time. This prevents your device from sending your data to the wrong BLUETOOTH® accessory. 6. Choose the Homewerks® speaker, and then enter a passkey or PIN (0000) if prompted. 7.
CABINA DE MEDICINA CON BLUETOOTH® PONENTES Home NetWerks MODELO #74-102-BT SIMPLE SOLUTIONS FOR A SMARTER HOME Las marcas registradas marca BLUETOOTH® y sus logotipos son marcas registradas propiedad de BLUETOOTH SIG, Inc. y cualquier uso de dicha marca por Homewerks Worldwide es bajo licencia. Otras marcas y nombres comerciales pertenecen a sus respectivos propietarios.
TABLA DE CONTENIDO Paquete y Hardware Contenido..........................................................................................................9 Paquete de Hardware y Contenido...................................................................................................10 Preparación....................................................................................................................................... 11 Herramientas Recomendadas (No Incluido)...................................
PAQUETE DE HARDWARE Y CONTENIDO C B F D E G H A PARTE A B C D DESCRIPCIÓN QTY Botiquín w/BLUETOOTH Altavoces Barra de montaje Clips de montaje Anclas ® 1 1 2 4 10 PARTE DESCRIPCIÓN QTY E F G H Tornillos Estante clips de bloqueo Los estantes de vidrio Adaptador de corriente con cable 4 12 3 1 www.homewerksww.
PREPARACIÓN Antes de comenzar el montaje del producto, asegúrese de tener todas las piezas. Compare las piezas con la lista del contenido del paquete y su contenido de hardware. Si alguna parte falta o está dañada, no intente ensamblar el producto. Póngase en contacto con el servicio al cliente de piezas de recambio. • Es importante asegurarse de que el cuerpo botiquín es el nivel y la plomada en la instalación.
INSTRUCCIONES DE INSTALACIÓN 3. Gire el botiquín (A) para la derecha o apertura de la puerta izquierda. Coloque los clips de montaje (C) en el canal central y deslice uno izquierdo y otro derecho, como se muestra. Lugar y mantenga botiquín (A) sobre la barra de montaje (B). Ubicación de los orificios Marcar para clips de montaje (C). 3 4. Establecer botiquín de lado (A). Perforar los agujeros e inserte los anclajes (D) para los clips de montaje (C). 4 5.
A. NORMAL BATERÍA OPCIÓN DE CARGA 1a. Únete al extremo macho del adaptador de corriente (H) a la conexión de las mujeres en el altavoz BLUETOOTH® en el lado del botiquín (A). 1a 2a. Conecte el cable a la toma de corriente GFCI más cercano para cargar altavoces. Cordón de seguridad con cinta de espuma de doble cara (no incluido) si colgando debajo del gabinete. B. HARD CABLE DE LA BATERÍA OPCIÓN DE CARGA 1b. Cable del adaptador de alimentación (H) se utilizará para este método de instalación. 2a 2b.
MARIDAJE DE BLUETOOTH® DISPOSITIVO PARA ALTAVOZ (CONTINUADO) 4. Siga las instrucciones que vienen con el dispositivo BLUETOOTH® para que sea visible o para configurarlo para buscar otros accesorios BLUETOOTH®. Esto puede implicar que entra una clave de acceso o PIN (Número de Identificación Personal). 5. En la pantalla Inicio, seleccione Configuración> BLUETOOTH®, el dispositivo busca altavoz Homewerks®.