HOME DECORATORS COLLECTION 1. Read enclosed detailed installation instructions before beginning install, . A flat sub floor is a must! Proper moisture testing is a must! Proper expansion around all permanent structures is a must! Molding, trim, transition, and finish pieces must not prevent the floor from floating. . Failure to follow installation instructions will void warranty. Acclimation is normally not necessary but may be required in extreme circumstances.
Required Tools and Supplies: «Circular Saw «Safety Glasses WW or¥” spacers + senility Knife « Straight Edge Ruler or T-Square «Pencil «Tape Measure Underpayment If existing baseboard molding is difficult to remove, Quarter Round molding will be required to cover the expansion space need between flooring and baseboard. SUITABLE TYPES OF SUB FLOORS AND FLOOR PREPARATION The sub floor must be flat, dry, and clean.
hydro static pressure exceeds lbs and Jor 90% RH, a moisture barrier must be installed over the concrete or you genius use multi-use LVT adhesive for the install. Note: New concrete needs to care for at least 60 days before installing flooring materials. If considering Radiant heat, only Hydroponic radiant heat can be used. The heating components must have a minimum of 3/8” separation from the product. System must be operational for a minimum of two weeks prior to installation.
+Install the second plank in the second row by inserting the short end tongue into the previously installed plank’s groove. Align the plank so that the long side tongue tip is positioned just over the groove lip of the plank in the first row (Figure F). Working from the end seam, at a low angle, insert the Jon tongue into the groove of the adjoining plank. Very little force is required to fit the tongue into the groove. You should be able to feel the tongue rock into the groove (Figure G).
Manufacturing Defect: During the period of the warranty, this product will be free front manufacturing defects. Water Proof: During the period of the warranty, this product is 10056 waterproof and the structural integrity of the floor will not be diminished by exposure to water, Wear Resistance: During the period of the warranty, this product’s wear layer will not wear through to the decorative layer under normal use.
+ If repairs or replacement of a section is deemed necessary, all ties must be cleared from the affected area subsequent to the original installation. The cost associated with the removal of those items will not be credited or reimbursed. * Product costs will be covered for the length of warranty. » Labor cost will not be covered + Warranty coverage for the replacement floor will be limited to the remaining portion of the original warranty.