Item # XXXX XXX XXX Model # SP6778 USER MANUAL 42 in. Infrared Wall Mount Electric Fireplace Unit size: 19.85 in h x 42 in w x 5.98 in d 21.72 in h x 42 in w x 11.4 in d (with legs) QUESTIONS, PROBLEMS, MISSING PARTS? BEFORE RETURNING TO THE STORE, CALL HOME DECORATORS COLLECTION CUSTOMER SERVICE 8 A.M. - 7 P.M., EST, MONDAY - FRIDAY, 9 A.M. - 6 P.M., EST, SATURDAY 1-800-986-3460 HOMEDEPOT.
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 3-4 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Tools Required . . . . . . . . . . . . . . . . . . .
Important Safety Instructions Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 14. This appliance has hot and arcing or sparking parts inside. be used as a drying rack for clothing. Christmas stockings or decorations should not be hung in the area of it. 1-800-986-3460, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 15.
Important Safety Instructions (continued) ELECTRICAL CONNECTION □ This product is equipped with a polarized plug (one blade is wider than the other blade). To reduce the risk of electrical shock, this plug will fit into a polarized outlet only one way. This is a safety feature. If you are unable to insert the plug into the electrical outlet, try reversing the plug. If the plug still does not fit, contact a qualified electrician.
Pre-Installation PLANNING ASSEMBLY □ Before you begin, locate the instructions and hardware. Be sure you have all of the parts and can identify them. □ □ Assembly of this product may require more than one person. TOOLS REQUIRED Philips Screwdriver Hand Drill PRODUCT SPECIFICATIONS Voltage 120 VAC, 60 Hz Amps 12.5 Amps Watts 1500 Watts HARDWARE INCLUDED WARNING: The included plastic wall anchors (BB) are intended for use with solid wall applications only (tile and concrete).
Pre-Installation (continued) PACKAGE CONTENTS D A B H G C F E I Part A B C D E F G H I Description Top Mounting Bracket Fireplace Heater directional bracket (optional) Front Glass Decorative crystals Bottom Mounting Bracket Left Foot Right Foot Remote Control 6 Quantity 1 1 1 1 1 1 1 1 1
Installation The Fireplace can be installed with 2 options: 1. Mount the unit on the wall.....Page 8 2. Freestanding.....Page 12 7 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Installation - Wall Mount 1 Determine the desired location □ WARNING: direct sunlight and away from overhead lighting. WARNING: For safe operation choose a mounting location with at least 6" of clear space around the unit. 150mm 6in. 150mm 6in. 150mm 6in. 2 Mark the drill holes □ Use a level to align the bracket and mark the holes with a pencil. A 14in 356.5mm 14in 356.5mm 14in 356.5mm 35mm 1.4in Minimun height 6in F 8 14in 356.
Installation - Wall Mount (continued) 3 Secure the top bracket to the wall □ Select hardware best suited for your wall type and secure the top mounting bracket (A) to the wall. WARNING: Enclosed wall anchors (BB) only can be used on the concrete wall. BB STUD WALL: DRYWALL: CONCRETE WALL: Secure the top mounting bracket (A) to the wall using the screws (AA) at the marked stud locations. Screw wall anchors (not included) Drill holes at marked locations, then insert wall anchors (BB) into the holes.
Installation - Wall Mount (continued) 4 Remove the front glass □ Remove the front glass for easy installation.
Installation - Wall Mount (continued) B 6 □ B B A □ Select hardware r best suited for your wall type and secure the bottom bracket (F) to the wall. A WARNING: Enclosed wall anchors (BB) only can be used on the concrete wall. AA STUD WALL: DRYWALL: CONCRETE WALL: Secure the bottom mounting bracket (F) to the wall using the screws (AA) at the marked stud locations. Screw wall anchors (not included) Drill holes at marked locations, then insert wall anchors (BB) into the holes.
Installation - Freestanding 1 Remove the front glass and assemble the base □ Remove the front glass. □ Attach the heater directional bracket (C) using two screws (DD) to the fireplace (B).
Installation - Freestanding 3 Put the crystals in and mount the front glass back □ Put the decorative crystals (E) into the fireplace media tray, and mount the front glass (D) to the fireplace (B). B CC E D 13 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Operation Power Flame Heater Brightness Lock Timer Control Panel The fireplace can be operated by either the remote control or the control panel unit side.
Operation (continued) 1 2 Powering the Fireplace Adjusting the Temperature □ Push the Power button to supply power to all functions of □ The Heater button controls the heater ’s thermostat setting. □ Push the Power button again to turn off all functions. □ Press button to select the desired temperature. □ When the unit is in ON mode, the power icon indicator light is green. □ The thermostat setting range is 65°F (18°C) to 90°F (32°C), ON & OF (OFF).
Operation (continued) 5 6 Adjusting the Flame and Emberbed Colors Using the Child Lock feature □ When the unit is ON, hold the Lock button for 3 seconds to activate the Child Lock function. E3 will be displayed, buzz □ □ display when adjust temperature setting. settings: C5, C4, C3, C2 and C1. Setting C1 C2 C3 C4 C5 Flame Color Blue Yellow+Red+Blue fading Yellow + Red Yellow + Red + Blue fading Yellow+Red+Blue □ To deactivate the Child Lock function, hold the Power button for 3 seconds.
FCC/IC Information Please read and understand this entire manual before attempting to assemble, operate or install the product. This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Care And Maintenance (Continued) NOTE: When the heater is not in use, the heater should be stored in a dry location, away from possible damage. The power cord should be stored properly to avoid contact with hot or sharp objects. Replacing the Remote Control Battery When the remote control stops operating or its range seems reduced, it is time to replace the batteries. 1. The battery compartment is located on the back end of the remote control. 2.
Troubleshooting Problem There is no power and the logs do not glow. E1 displayed on control panel. E2 displayed on control panel. E3 displayed on control panel. E4 displayed on control panel. Fan motor continues to blow after unit is powered off. Power cord gets warm to the touch. Possible Cause Corrective Action Check that the unit is plugged into a standard The unit does not have power. 120 volt outlet. Then make sure power is set to the “ON” position.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
