Instructions / Assembly

www.homedepot.com/homedecorators
Please contact 1-800-986-3460 for further assistance.
1
Mounting the hardware
 Thread the nipple (FF) into the central
holes on the mounting bracket (GG).
 Thread the hex nut (BB) onto the nipple
(FF). Do not tighten the hex nuts (BB) at
this time.
 Pull the supply wires out from the outlet
box and mount the mounting bracket (GG)
to the outlet box using the bracket
mounting screws (EE).
 Place the fixture pan (A) over the outlet
box and onto the nipple (FF).
 Adjust the nipple (FF) until it protrude out
from the fixture pan (A) 1/4 in.
 Remove the fixture pan (A) and secure the
position of the nipple (FF) by tightening the
hex nut (BB) against the mounting bracket
(GG).
2
Connecting the wires
 Connect the black supply wire to the black
fixture wire using a wire nut (DD).
 Connect the white supply wire to the white
fixture wire using a wire nut (DD).
 Connect the fixture ground wire to the
supply ground wire using a wire nut (DD).
 Wrap all wire connections with electrical
tape for a more secure connection.
 Carefully tuck the wires and wire nuts (DD)
into the outlet box.
Installation
5
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.
DD
GG
A
EE
BB
GG
FF