Item: 1002 654 891 Model: HB7086-260 USE AND CARE GUIDE ____________________________________ EXTERIOR INCANDESCENT CEILING FLUSH MOUNT Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday 9 a.m. – 6 p.m., EST, Saturday 1-800-986-3460 www.homedepot.
Table of Contents Table of Contents Safety Information Warranty Pre-Installation Planning the Installation Tools Hardware Package Contents 2 2 2 3 3 3 3 4 Installation Operation Care and Cleaning Exterior Maintenance Interior Maintenance Troubleshooting 5 7 7 7 7 7 Safety Information Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Pre-Installation PLANNING THE INSTALLATION Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for Proof of Purchase.
Pre-Installation (continued) PACKAGE CONTENTS A B Part Description Quantity A Fixture Pan 1 B Cage 1 4
Installation 1 Mounting the hardware Thread the nipple (FF) into the central holes on the mounting bracket (GG). Thread the hex nut (BB) onto the nipple (FF). Do not tighten the hex nuts (BB) at this time. Pull the supply wires out from the outlet box and mount the mounting bracket (GG) to the outlet box using the bracket mounting screws (EE). GG EE Place the fixture pan (A) over the outlet box and onto the nipple (FF).
Installation (continued) 3 Mounting the fixture Place the fixture pan (A) onto the nipple (FF) and secure it into place by using the lock nuts (AA) provided. FF AA 4 Assembling the fixture A NOTE: Do not exceed a 60 watt incandescent light bulb. For more information on the proper lighting to use, see www.homedepot.com/lightingfacts. Place the cage (B) over the fixture pan (A). Secure the cage (B) to the fixture pan (A) by using the cage screws (CC).
Operation Turn on power at the circuit breaker or fuse box. Turn the light switch on to activate the fixture. Care and Cleaning EXTERIOR MAINTENANCE NOTE: Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully. Use a dry or slightly dampened clean cloth and wipe the surface of the fixture. INTERIOR MAINTENANCE Disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday 9 a.m. – 6 p.m., EST, Saturday 1-800-986-3460 www.homedepot.com/homedecorators Retain this manual for future use.
Artículo: 1002 654 891 Modelo: HB7086-260 GUÍA DE USO Y MANTENIMIENTO ____________________________________ LUMINARIO INCANDESCENTE DE TECHO PARA EXTERIORES Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection 8 a.m. – 7 p.m., Hora del Este, Lunes – Viernes 9 a.m. – 6 p.m., Hora del Este, Sábado 1-800-986-3460 www.homedepot.
Tabla de Contenidos Tabla de Contenidos Información de Seguridad Garantía Pre-Instalación Planificación de la Instalación Herramienta Ferretería Contenido del Paquete 10 10 10 11 11 11 11 12 Instalación Operación Cuidado y Limpieza Mantenimiento Exterior Mantenimiento Interior Solución de Problemas 13 15 15 15 15 15 Información de Seguridad Antes de iniciar la instalación de este aparato o la eliminación de un accesorio anterior, desconecte la alimentación apagando el disyuntor o quitando el fusible
Pre-Instalación PLANIFICACIÓN DE LA INSTALACIÓN Lea todas las instrucciones antes del montaje e instalación. Antes de comenzar la instalación de la luminaria o el retiro de un artefacto anterior, desconecte la alimentación apagando el disyuntor o quitando el fusible en la caja de fusibles. Para evitar daños a este producto, montarlo en una superficie suave y no abrasiva, como una alfombra o cartón. NOTA: Guarde su recibo y estas instrucciones para comprobante de compra.
Pre-Instalación (continuado) CONTENIDO DEL PAQUETE A B Parte Descripción Cantidad A Base del Luminario 1 B Jaula 1 12
Instalación 1 Montaje de ferretería Enrosque la boquilla (FF) en el agujero central en la ménsula de montaje (GG). Enrosque la tuerca hexagonale (BB) en la boquilla (FF). No apriete la tuerca hexagonale (BB) en este momento. Saque los cables de alimentación de la caja de distribución y monte la ménsula de montaje (GG) sobre la caja de distribución utilizando los tornillos de la ménsula (EE). GG EE Coloque la base del luminario (A) sobre la caja de distribución y en la boquilla (FF).
Instalación (continuado) 3 Asegurando la base del luminario Coloque la base del luminario (A) sobre la boquilla (FF) y asegúrela con la tuerca de seguridad (AA) que se incluye. FF AA 4 Asamblea del luminario A NOTA: No exceda una bombilla incandescente de 60 vatios. Para obtener más información sobre la iluminación adecuada que debe utilizar, consulte www.hamptonbay.com. Coloque la jaula (B) sobre la base del luminario (A).
Operación Conecte la alimentación en el disyuntor o caja de fusibles. Gire el interruptor de la luz para activar el aparato. Cuidado y Limpieza MANTENIMIENTO DEL EXTERIOR NOTA: No use limpiadores con químicos, solventes o abrasivos fuertes. Use sólo un paño seco para sacudir o limpiar con cuidado. Use un paño limpio y seco o ligeramente humedecido y limpie la superficie de la linterna.
Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection 8 a.m. – 7 p.m., Hora del Este, Lunes – Viernes 9 a.m. – 6 p.m., Hora del Este, Sábado 1-800-986-3460 www.homedepot.com/homedecorators Conserve este manual para futuras consultas.
Article: 1002 654 891 Modèle: HB7086-260 GUIDE D'UTILISATION ET D'ENTRETIEN ____________________________________ LUMINAIRE PLAFONNIER INCANDESCENT POUR EXTÉRIEURS Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Home Decorators Collection Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi 9:00 – 18:00, HNE, Samedi 1-800-986-3460 www.homedepot.
Table des Matières Table des Matières Consignes de Sécurité Garantie Pré-Installation Planification du l’Installation Outils Matériel Contenu du Paquet 18 18 18 19 19 19 19 20 Installation Opération Entretien et Nettoyage Entretien Extérieur Entretien Intérieur Dépannage 21 23 23 23 23 23 Consignes de Sécurité Avant de commencer l'installation de ce luminaire ou à la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la platine de fus
Pré-Installation PLANIFICATION DE L'INSTALLATION Lire toutes les instructions avant assemblage et l'installation. Avant de commencer l'installation du luminaire ou la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la platine de fusibles. Pour éviter d'endommager le produit, assembler sur un doux et non abrasif surface tels que tapis ou un morceau de carton. NOTE: Conservez votre reçu et ces instructions à la preuve d'achat.
Pré-Installation (continue) CONTENU DU PAQUET A B Partie Description Quantité A Plateau du Luminaire 1 B Cage 1 20
Installation 1 Le montage du matériel Vissez la tige filetée (FF) dans les trous prévus sur la plaque de fixation (GG). Vissez le écrou hexagonaux (BB) sur la tige filetée (FF). Ne pas serrer les écrous hexagonaux (BB) pour l’instant. Tirez les fils d’alimentation hors de la boîte de sortie et installez la plaque de fixation (GG) sur la boîte de sortie à l’aide des vis du luminaire (EE).
Installation (continue) 3 Sécurisation de le plateau du luminaire Placez le plateau du luminaire (A) sur la tige filetée (FF) et le fixer en place à l'aide des écrous de serrage (AA) fournies. FF AA 4 Assemblage du luminaire A NOTE: La puissance de l’ampoule incandescente ne doit pas dépasser 60 watts. Pour plus d'informations sur l'éclairage adéquat à utiliser, voir www.homedepot.com/lightingfacts. Placez le cage (B) sur le plateau du luminaire (A).
Opération Mettez sous tension au niveau du disjoncteur ou des fusibles. Allumez l'interrupteur pour activer l'appareil. Entretien et Nettoyage ENTRETIEN EXTÉRIEUR NOTE: N’utilisez aucun produit de nettoyage contentant des agents chimiques, des solvants ou des abrasifs durs. Utilisez uniquement un linge doux et sec pour enlever la poussière en essuyant délicatement Utilisez un linge sec ou légèrement humide et essuyez le luminaire.
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Home Decorators Collection Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi 9:00 – 18:00, HNE, Samedi 1-800-986-3460 www.homedepot.com/homedecorators Conserver ce manuel pour un utilisation ultérieure.