Installation Guide

HOMEDEPOT.COM
Please contact 1-800-986-3460 for further assistance.
1
Mounting the hardware
 Thread the fixture screws (EE) into the
provided holes of the mounting bracket
(GG).
 Thread the hex nuts (BB) onto the fixture
screws (EE). Do not tighten the hex nuts
(BB) at this time.
 Pull the supply wires out from the outlet
box and mount the mounting bracket (GG)
to the outlet box using the mounting
screws (DD).
 Place the fixture body (A) over the outlet
box and onto the fixture screws (EE).
 Adjust the fixture screws (EE) until they
protrude out from the fixture body (A) 1/4
in.
 Remove the fixture body (A) and secure
the position of the fixture screws (EE) by
tightening the hex nuts (BB) against the
mounting bracket (GG).
2
Connecting the wires
 Connect the black supply wire to the black
fixture wire using a wire nut (CC).
 Connect the white supply wire to the white
fixture wire using a wire nut (CC).
 Loop the supply ground wire around the
ground screw on the mounting bracket and
tighten it in place.
 Connect the fixture ground wire to the
supply ground wire using a wire nut (CC).
 Wrap all wire connections with electrical
tape for a more secure connection.
Installation
5
DD
GG
EE
BB
A CC
GG
EE
BB
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.