Item #1007 536 603 Model # FHHS80019 USE AND CARE GUIDE ST. CHARLES LP PATIO HEATER Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this patio heater.
Table of Contents Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Troubleshooting . . . . . . . . . . . . . .
Safety Information (continued) DANGER: EXPLOSION - FIRE HAZARD Keep solid combustibles, such as building materials, paper or cardboard, a safe distance away from the heater as recommended by the instructions. Provide adequate clearances around air openings into the combustion chamber. Adequate clearance around air openings into the combustion chamber , clearances from combustible material, provisions for accessibility, and for combustion and ventilating air suppl y.
Safety Information (continued) WARNING: WARNING: FUELS USED IN LIQUEFIED PROPANE GAS APPLIANCES, AND THE PRODUCTS OF COMBUSTION OF SUCH FUELS, CAN EXPOSE YOU TO CHEMICALS INCLUDING BENZENE, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. For more information go to: www.p65warnings.ca.gov. WARNING: BURN HAZARD Never leave heater unattended when hot or in use. Keep out of reach of children.
Warranty 1 YEAR FRAME LIMITED WARRANTY WHAT IS COVERED We warrant the frames to be free of manufacturing defects to the original purchaser for one year. WHAT IS NOT COVERED It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover commercial use, hardware, acts of nature, fire, freezing, and abusive use. In addition, purchased parts are not covered under this warranty.
Pre-Assembly (continued) PACKAGE CONTENTS B A C H I D E G F Part Description Quantity A Reflector Panel 1 3 B Reflector Panel 2 Head Assembly 1 D E Upper Pole Lower Pole 1 1 F Cylinder Housing 1 G Decorative Cover 1 H I Control Knob 1 1 C Manual Electric Igniter WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this appliance may result in property damage or personal injury.
Assembly 1 Connecting the Upper Pole to the Lower Pole Put the decorative cover (G) through the lower pole (E), as shown below. Attach the upper pole (D) to the lower pole (E) using 3/16 in. bolts (BB). Tighten all the bolts at this step. D BB E G 7 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Assembly (continued) 2 Connecting the Reflector Studs to the Head Assembly Attach the reflector studs (DD) through M8 washers (GG) to the head assembly (C). Tighten all the studs at this step.
Assembly (continued) 3 Connecting the Reflector Panels 1 to the Reflector Panel 2 Remove protective film before assembling. Attach the three reflector panels 1 (A) together using M6 x 10 bolts (DD), M6 washers (GG) and nut caps (HH), as shown below. Attach the reflector panels 1 (A) to the reflector panel 2 (B) using M6 x 10 bolts (DD), M6 washers (GG) and nut caps (HH), as shown below. Tighten all the bolts at this step. A A II HH B EE B A II HH EE 9 HOMEDEPOT.
Assembly (continued) 4 Connecting the Reflector Panel 2 to the Head Assembly Attach the reflector panel 2 (B) to the head assembly (C) using M8 washers (GG) and wing nuts (FF), as shown below. Tighten all the bolts at this step.
Assembly (continued) 5 Connecting the Head Assembly to the Upper Pole Loosen the pre-assembled M6 x 10 hex bolts (CC) out of the head assembly (C). Insert the hose into the upper pole (D) using M6 x 10 hex bolts (CC), as shown below. Tighten all the bolts at this step. C CC CC C D E 11 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Assembly (continued) the Lower Pole to the Cylinder Housing and Securing 6 Connecting the Cylinder Housing to the Ground Attach the lower pole (E) to the cylinder housing (F) using M6 x 20 combination hex bolts (AA). Once all of the bolts are in place, fully tighten the bolts. Insert the ground spikes (JJ) through the cylinder housing (F) into the ground.
Assembly (continued) 7 Check the Heater The heater is now complete and ready to use. 13 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Operation WARNING: This product contains one AAA battery (LL). Swallowing a small battery can cause CHOKING HAZARD. Seek immediate medical attention if battery is swallowed or inhaled. Keep children away from the small battery.
Operation (continued) Connecting the Hose and Regulator to Cylinder Use a standard 20 lb. propane cylinder only (approximately 12.2 in./31cm.in diameter and 17.9 in./45.5cm high). 17.9 in. / 45.5 cm The propane gas and cylinder are sold separately. Every part of the heater shall be secure against displacement and shall be constructed to maintain a fixed relationship between essential parts under normal and reasonable conditions of handling and usage.
Operation (continued) Connect the Propane Cylinder Figure 1 The knob on the LP cylinder muct be closed. Make sure that the knob is turned clockwise to a full stop. The cylinder supply system must be arranged for vapor withdrawal. Check that the control knob on the control unit is turned off. Hold the regulator in one hand and insert the nipple into the valve outlet. Be sure the nipple is centered in the valve outlet. The coupling nut connects to the large outside threads on the valve outlet.
Operation (continued) LEAK CHECK NOTE: Whenever gas connections are loosened or removed, you must perform a complete leak test. WARNING: Perform all leak tests outdoors. Extinguish all open flames. NEVER leak test when smoking. Do not use the heater until all connections have been leak tested and do not leak. HOSE / REGULATOR CONNECTION REGULATOR / CYLINDER CONNECTION Make 2-3 oz. of leak check solution (one part liquid dishwashing detergent and three parts water).
Operation (continued) DANGER: CARBON MONOXIDE HAZARD For outdoor use only. Never use inside house, or other unventilated or enclosed areas. This heater consumes air (oxygen). Do not use in unventilated or enclosed areas to avoid endangering your life. DANGER: CAUTION: Do not attempt to operate until you have read and understand all Safety Information in this manual and all assembly is complete and leak checks have been performed.
Operation (continued) Lighting: Turn on the valve on the gas cylinder. Press and turn the control knob to HIGH (maximum) position (counter-clockwise 90°). (Figure 1) Holding down the control knob, press the igniter button several times until the main flame is ignited. Release the control knob 10 seconds after the ignition. Turn the control knob to LOW (minimum) and leave it there for 5 minutes or more before turning the knob to the desired temperature setting.
Operation (continued) WARNING: FOR YOUR SAFETY Be careful when attempting to manually ignite this heater. Holding in the control knob for more than 10 seconds before igniting the gas will cause a ball of flame upon ignition. When Heater is ON: Emitter screen will become bright red due to intense heat. The color is more visible at night. Burner will display tongues of blue and yellow flame.
Operation (continued) Heater is away from gasoline or other flammable liquids or vapors. Heater is away from windows, air intake openings, sprinklers and other water sources. Heater is at least 24 in. on top and at least 36 in. on sides from combustible materials. Heater is on a hard and level surface. There are no signs of spider or insect nests. All burner passages are clear. All air circulation passages are clear.
Care and Maintenance WARNING: FOR YOUR SAFETY Do NOT touch or move heater for at least 45 minutes after use. Reflector is hot to the touch. Allow reflector to cool before touching. To enjoy years of outstanding performance from your heater, make sure you perform the following maintenance activities every six months: Keep exterior surfaces clean. Use warm soapy water for cleaning. Never use flammable or corrosive cleaning agents.
Care and Maintenance (continued) Storage Turn control knob OFF. Disconnect LP cylinder. Store heater upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail, snow, dust and debris). If desired, cover heater to protect exterior surfaces and to help prevent buildup in air passages. NOTE: Wait until heater is cool before covering. Service Only a qualified service person should repair gass passages and assiciated components.
Troubleshooting Problem Possible Cause Corrective Action Cylinder valve is closed. Open valve. Blockage in orifice or pilot tube. Clean or replace orifice or pilot tube. Air in gas line. Open gas line and bleed it (pressing control knob in) for no more than 1-2 minutes or until you smell gas. Low gas pressure with cylinder valve fully open. Turn cylinder valve OFF and replace cylinder. Igniter fails. Use match to light pilot; obtain new igniter and replace. Dirt build up around pilot.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.