Item #1004 355 105 #1004 355 109 Model #AM382B-BN #AM382B-EB USE AND CARE GUIDE BRETTE II LED 23 INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Visual instruction of how to install this fan: Visit www.homedepot.
Table of Contents Table of Contents .......................................................... 2 Disassembling Your Fan ............................................. 13 Safety Information ......................................................... 3 Operation ......................................................................14 Remote Control Operating Instructions ..................................14 Installing the Remote Control Holder .....................................
Safety Information However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.
Warranty The manufacturer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. The manufacturer warrants the light kit (excluding any glass), to be free from defects in workmanship and material present at time of shipment from the factory for a period of five years after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS A B C D E 4 3 1 2 DIP F G J H Part Description I K Quantity Part A Mounting bracket (preassembled) 1 G Blade (preassembled) 1 B Canopy ring (preassembled) 1 H Guard (preassembled) 1 C Canopy 1 I Receiver 1 D Hanger ball/downrod assembly 1 J Remote control 1 E Coupling cover 1 K Remote control holder 1 F Fan motor assembly 1 6 Description Quantity
Installation MOUNTING OPTIONS NOTE: You may need a longer downrod to maintain proper blade clearance when installing on a steep, sloped ceiling. The maximum angle allowable is 18° away from horizontal. If the canopy (C) touches the hanger ball/downrod assembly (D), turn the canopy (C) 180° before attaching the canopy (C) to the mounting bracket (A).
Assembly 1 2 Preparing the canopy Preparing the motor □ Remove the canopy ring (B) from the canopy (C). □ □ Remove the two non-slotted canopy mounting screws with lock washers (BB) from the canopy (C), and loosen the slotted canopy mounting screws with lock washers (BB) on the canopy (C). Remove the cotter pin (FF) and clevis pin (EE), and loosen the two collar setscrews (II) from the motor collar.
Assembly — Hanging the Fan 4 Hanging the fan to the mounting bracket 5 Installing the mounting bracket to the electrical box WARNING: To reduce the risk of fire, electric shock or other personal injury, mount the fan only to an outlet box or supporting system marked acceptable for fan support and use the mounting screws provided with the outlet box. □ Pass the 120-volt supply wires through the center hole in the mounting bracket (A).
Assembly — Hanging the Fan (continued) Preparing the receiver and remote control 6 WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. J CAUTION: Do not use with a wall light dimmer switch. I 1 2 3 If you feel you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.
Assembly — Hanging the Fan (continued) 7 Making the electrical connections WARNING: Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire nuts, except for the ground wire. CAUTION: Do not use with a wall light dimmer switch. MM NOTE: The fan must be installed at a maximum distance of 20 ft. from the remote control for proper signal transmission between the remote control and the fan's receiving unit.
Assembly — Hanging the Fan (continued) 8 Installing the canopy MM BB WARNING: Make sure the tab on the mounting bracket (A) properly sits in the groove in the hanger ball/downrod assembly (D) before attaching the canopy (C) to the mounting bracket (A) by turning the canopy (C) until it drops into place. BB D C B WARNING: The locking slots of the canopy (C) are provided only as an aid to mounting.
Disassembling Your Fan This fan comes with a pre-assembled guard (H) and blade (G) for your easy installation. Check that all screws are tight and securely in place. F If you need to disassemble the fan for any reason such as cleaning, follow these steps below: □ Loosen the guard screws (RR) to disassemble the guard (H). □ Loosen the setscrew at the top of the blade head (G) by using the hex wrench (KK). □ Remove the blade (G) from the motor shaft (SS). SS G KK H RR 13 HOMEDEPOT.
Operation REMOTE CONTROL OPERATING INSTRUCTIONS □ Install the 12V MN21/A23 battery (JJ) (included) into the remote control (J). To prevent damage to the remote control (J), remove the battery if not used for long periods. □ Restore power to the ceiling fan and test for proper operation. J HI, MED, LOW buttons: set the fan speed. OFF button: turns the fan off. JJ button: turns the light on or off and also controls the brightness setting. Press and release this button to turn the light on or off.
Operation (continued) REVERSE SWITCH OPERATING INSTRUCTIONS Reverse switch The reverse switch is located on the top of the motor housing. Slide the switch to the right for warm weather operation. Slide the switch to the left for cool weather operation. NOTE: Wait for the fan to stop before reversing the direction of the blade rotation. Warm weather - (Clockwise Direction) A downward air flow creates a cooling effect.
Troubleshooting WARNING: Make sure the power is off at the electrical panel box before you attempt any repairs. Refer to step 7 “Making the electrical connections” on page 11. Problem The fan will not start. The fan sounds noisy. The remote control is not working. Solution □ Check the main and branch circuit fuses or breakers. □ Check the line wire connections to the fan and switch wire connections in the switch housing.
Service Parts A G B C AA HH BB II H CC DD JJ 3 4 I 1 2 DIP D E EE KK J FF F GG K Part Description LL Part Description A Mounting bracket (preassembled) AA B Canopy ring (preassembled) BB Canopy mounting screw with lock washer (preassembled) Plastic wire nut C Canopy CC D Hanger ball/downrod assembly DD Remote control holder plug (preassembled) E Coupling cover EE Clevis pin (preassembled) F Fan motor assembly FF Cotter pin (preassembled) G Blade (preassembled)
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.