Instructions / Assembly

ASSEMBLY INSTRUCTIONS FOR FIELDS CONSOLE TABLE
Step 1 : Turn table top upside down onto a
clean surface as shown in the Fig.2.
Step 2 : Fasten the bolts provided in the
table top as shown in the Fig. 3.
Step 3: Match label on table top with the
label on leg (”A” with “A” and “B”
with “B”) as shown Fig. 5.
Step 4: Fix the leg to the table by rotating it
in clockwise direction as shown in
the shown Fig. 6.
Step 5: Repeat the same for remaining legs.
Step 6 : Turn the table in upright position
after assembly.
Fig. 8
B
D
C
A
Fig. 4
Table Top : 1 Pc
Bolts:4+2 pcs
C
A
B
D
A
B
C
D
Fig. 1 Fig. 2
Leg : 4 Pcs
A
B
C
D
B
C
A
Fig. 5
D
Fig. 7
C
Fig. 3
Fig. 6
Pre-assembly:
• Please read all instructions carefully before beginning
assembling.
• It is recommended that assembly is done on a soft surface such
as carpet to avoid any damage.
• We recommend adult assembly by two people for your safety.
SKU#96904
Care Information:
• Clean using a soft, dry cloth.
• Do not use harsh abrasives, chemicals or polishes containing
silicone to as they can damage this finish.
• Avoid direct sunlight as this will cause the timber to change colour.
• It is important to remove moist substances immediately.
CAC18II2016