Item #xxxx xxx xxx Model #56045 UL Model #52-EMME USE AND CARE GUIDE BRAISE 52-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS To view an instructional video on how to install this product: 1. Go to www.homedepot.
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 13 Warranty................................................................................ 3 Care and Cleaning................................
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier warrants that the light kit, excluding any glass, to be free from defects in workmanship and material at the time of shipment from the factory for a period of five years after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS H A I B J C K D L E M N F O G P Part Description Quantity A Slide-on mounting bracket (inside canopy) 1 B Ball/downrod assembly 1 C Canopy 1 D Decorative motor collar cover 1 E Fan-motor assembly 1 F Blade arm G H Part Description Quantity I Light kit fitter assembly 1 J Shatter resistant plastic shade 1 K Blade 5 L Receiver 1 M Remote control 1 N LED Bulb 1 5 O Extension lead wire 1 Blade arm bracket 5 P B
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs (15.9 kg) or less”, and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly - Standard Ceiling Mount 1 2 Preparing for mounting □ Remove the magnetic canopy bottom cover (JJ) from the □ □ □ canopy (C) by pulling it off. Loosen the two canopy screws (SS) located in the bottom of the mounting bracket (A). Turn the mounting bracket (A) counterclockwise and lift it up to remove the mounting bracket from the canopy (C).
Assembly - Hanging the Fan 1 2 Attaching the fan to the electrical box □ Carefully lift the fan-motor assembly (E) up to the slide-on WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs 15.9 kg) or less”, and use screws provided with the outlet box. mounting bracket (A).
Assembly - Hanging the Fan (continued) 3 4 Setting the code on the remote control and receiver Installing the receiver WARNING: To reduce the risk of fire or electric shock, remember to disconnect power. The electrical wiring must meet all local and national electrical code requirements. The electrical source and fan must be 110/120 volt, 60Hz. Do not use this product in conjunction with any variable wall control. Incorrect wire connection can damage this receiver.
Assembly - Hanging the Fan (continued) 5 6 Wiring the receiver to the household wiring WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician. Wiring the fan to the receiver NOTE: The fan comes with 12 in. lead wires for use with the provided 4.5 in. ball downrod assembly (B).
Assembly - Hanging the Fan (continued) 7 Mounting the fan-motor assembly (standard mount) A □ Align the locking slots of the canopy (C) with the two □ □ □ L QQ SS screws (SS) and alignment post (QQ) in the mounting bracket (A). Push up the canopy (C) and turn clockwise until the alignment post (QQ) engages to the round hole and the screws (SS) engage to the key slots. Firmly tighten the two mounting screws (SS). Align the oval shape on the canopy (C) with canopy bottom cover (JJ).
Assembly - Attaching the Light Kit 1 Installing the light kit pan □ Remove one screw (MM) from the black bracket below the fan □ □ □ motor assembly (E), and loosen but do not remove the other two screws. Push the light kit pan (H) up to the fan motor assembly (E) so that the two loosened screw heads fit into the keyhole slots. Turn the light kit pan (H) clockwise. Re-install the screw (MM) that was removed in the first step. Make sure all the screws are firmly tightened.
Operating Your Fan and Remote Control Remote Control - Your fan is equipped with a remote control to operate the speed and lights of your new ceiling fan. Warm weather PP Speed setting for warm or cool weather depends on factors such as the room size, ceiling height, number of fans and so on. The fan is shipped from the factory with the reversing switch (PP) positioned to circulate air downward.
Assembly - Attaching the Accessories Mounting the remote control holder Screw cover plate NOTE: Screw wall anchors are included for extra support. The included screws are designed to screw easily into the wall. If you would like a more permanent or secure hold, install the wall anchors prior to attaching the wall cradle to the wall. □ Slide the screw cover plate up to remove it from the wall □ □ cradle.
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □ Clean your fan periodically to help maintain its new appearance over the years.
Questions, problems, missing parts? Before returning to the store, call Home Depot Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.