Instructions / Assembly

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Installation (continued)

Installing the canopy to the outlet

box

Fasten the threaded pipe (G) into the bushing located on

the socket as shown.

Slide the glass diffuser (H), the rubber washer (KK) and the

metal washer (LL) over the threaded pipe (G) and secure by

the hex nut (MM) as shown in the diagram (Do not tighten

excessively). Then place the metal cap (NN) over the

threaded pipe (G) and secure it with the nial (OO).

NOTE: You can also use three 13W maximum medium

base (E26) SBCFLs (sold separately). Do not exceed the

recommended wattage.

Raise the canopy (A) all the way up to the ceiling, and

tighten the ring (II) onto the screw collar loop (HH) until

the canopy (A) is rmly held against the ceiling.

Installing the glass diffuser to the

shade assembly

Installing the light bulbs

Install the bulbs (not included) into the sockets. Use three

60-watt maximum medium base (E26) type A bulbs.