Instructions / Assembly

Installation (continued)

Unscrew the ring (II) from the screw collar loop (HH), and

lower the canopy (A) and ring (II) over the chain (B) on the

xture.

Weave the xture wires and bare copper ground wire up

through the chain (B), ring (II), canopy (A), screw collar loop

(HH), threaded tube (BB), and then into the outlet box.

Strip 3/4 in. of insulation from the wire ends.

Connect the glossy live wire from the xture to the black

wire from the outlet box, and the rough neutral wire from the

xture to the white wire from the outlet box.

The bare copper ground wire from the xture must loop one

turn under the head of the green ground screw (EE) on the

mounting bracket (AA) before it is connected to the ground

conductor of the supply circuit.

Cover the wires with the wire connectors (FF). Tape the wire

connectors (FF) and wires together, and carefully position

all wires inside the outlet box.

Making the electrical connections

Weaving the xture wire

NOTE: The glossy live wire has the text printed on it;

the rough neutral wire has a ridge on it.