Item #702 996 Model #16786 USE AND CARE GUIDE 1-LIGHT WALL SCONCE Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and co you have placed in Home Decorators Collection through the purchase of this light xture. We strive to continually create quality products designed to enhance your home.
Table of Contents Hardware Included ...................................................................3 Package Contents ....................................................................4 Installation ..................................................................... 5 Care and Cleaning ........................................................ 7 Troubleshooting ............................................................ 7 Service Parts .................................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before installing. To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard. NOTE: This product requires one 60W maximum IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-800-986-3460.
Pre-Installation (continued) PACKAGE CONTENTS A Part Description Quantity A Fixture body 1 4
Installation 1 Perparing the mounting bracket 2 Installing the mounting bracket □ Fasten the support screws (BB) into the mounting bracket (AA), and secure it using the hex nuts (DD). □ Fasten the mounting bracket (AA) onto the outlet box using two outlet box screws (CC). AA NOTE: The support screws (BB) should extend long enough to protrude throu mounted (Adjust as needed). CC BB AA DD 3 Making the electrical connections □ Strip 3/4 in. of insulation from the wire ends.
Installation (continued) 4 the outlet box □ 5 AA BB A □ Tighten the cap nuts (GG) onto the protruding support screws (BB) on the mounting brack Installing the light bulbs □ Install the bulb (not included) into the socket. Use one 60-watt maximum candelabra base (E12) type B bulb. NOTE: You can also use a 13W maximum candelabra base (E12) SBCFL (sold separately). Do not exceed the recommended wattage.
Care and Cleaning □ Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully. □ To clean the xture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or slightly dampened, clean cloth to wipe the exterior surface of the ure. Troubleshooting Problem Possible Cause Solution The lights will not turn on. The bulb is burned out. Replace the light bulb. The power is off.
Service Parts MODEL : 16786 AA DD BB EE GG FF A Part Description AA BB Mounting bracket Support screw Outlet box screw Hex nut CC DD EE FF GG A Green ground screw (Pre-assembled to mounting bracket (AA)) Wire connector Cap nut Fixture body 8 CC
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
Artículo #702 996 Modelo #16786 GUÍA DE USO Y MANTENIMIENTO LÁMPARA DE PARED DE 1 LUZ ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS GRACIAS POR TU COMPRA. ente crear productos de calidad diseñados para mejorar tu hogar.
Índice Aparillage Incluido ...................................................................3 Contenido del Paquete .............................................................4 Instalación ..................................................................... 5 Cuidado y Limpieza ...................................................... 7 Solución de Problemas ................................................ 7 Partes de Servicio......................................................... 8 Tipo de Modelo......
Pre-Instalación PLANIFICACIÓN DE LA INSTALACIÓN Lea todas las instrucciones antes de comenzar la instalación. Para evitar dañar el producto, colócalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. NOTA: Este producto requiere una bombilla de 60W IMPORTANTE: Revisa que el aislamiento de los cables no haya sufrido ningún corte, abrasión ni tenga filamentos de cobre expuestos debidos al envío. Si hay un defecto en el cable suspenda el ensamblaje.
Pre-Instalación (continuación) CONTENIDO DEL PAQUETE A Pieza A Cantidad Descripción 1 Cuerpo de la lámpara 4
Instalación 1 Preparando el soporte de montaje 2 Instalación del soporte de montaje □ Fije los tornillos de soporte (BB) al soporte de montaje (AA), y asegúrelo usando las tuercas hexagonales (DD). □ Coloque el soporte de montaje (AA) sobre la caja eléctrica usando los dos tornillos de la caja eléctrica (CC). AA NOTA: Los tornillos de soporte (BB) deben extenderse lo suficiente para sobresalir a través del dosel del cuerpo de la lámpara (A) cuando esté montado. (Ajustar según sea necesario).
Instalación (continuación) AA BB □ Coloque el cuerpo de la lámpara (A) sobre la caja eléctrica, y asegúrese que los extremos de los tornillos de soporte (BB) sobresalgan por los orificios de atras del cuerpo de la lámpara (A). □ Apriete las tuercas ciegas (GG) en los tornillos de soporte (BB) en el soporte de montaje (AA) hasta que el cuerpo de la lámpara (A) esté asegurado firmemente contra la pared. 5 Instalación de la bombilla □ Instale la bombilla (no incluida) en el receptáculo.
Mantenimiento y Limpieza No use limpiadores con químicos, solventes ni productos abrasivos. Use sólo un paño suave y seco para desempolvar o limpiar con cuidado. Para limpiar la lámpara, primero corta el suministro de electricidad, apagando el interruptor automático o retirando el fusible correspondiente en la caja de fusibles. Seguidamente, usa un paño limpio, seco o ligeramente húmedo (usa sólo agua limpia, nunca un solvente) para limpiar el exterior de la lámpara.
Piezas de remplazo MODELO : 16786 AA DD BB EE GG FF A Pieza AA BB CC DD EE FF GG A Descripción Soporte de montaje Tornillo de soporte Tornillo de la caja eléctrica Tuerca hexagonal Tornillo verde a tierra (Preinstalado al soporte de montaje (AA)) Conector de cable Tuerca ciega Cuerpo de la lámpara 8 CC
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Conserva este manual para referencias futuras.