Installation Guide

10
Assembly (continued)
7
8
5
6
H
F
E
AA
FF
AA
MM
LL
A
A
Insert Wood Dowels (AA) into the previously
assembled unit (Step 4).
Using a Phillips screwdriver, secure the Decorative
Base Panel (E) by inserting Washers (MM) and Bolts
(LL) through the pre-drilled holes in the Base (A).
On a at surface, align the previously assembled unit
(step 5) and the Base (A).
Insert Screws (FF) through the pre-drilled holes in
the Base (A). Tighten with a Phillips screwdriver.
Insert Wood Dowels (AA) into the pre-drilled holes in the
Left and Right Side Panels (F,H).
Preparing the center panels Attaching the decorative base panel
Attaching the base Preparing the side panels