User Manual

ManualsBrandsHome Automation ManualsElectronicsZigbee Module

Table Of Contents

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598

Certification Exhibit

FCC ID: HHC-65A261

IC: 1516A-65A261

FCC Rule Part: 15.247

IC Radio Standards Specification: RSS-210

ACS Report Number: 09-0411-15C

Manufacturer: Home Automation Inc.

Model: 65A26-1

Manual

Summary of content (7 pages)

PAGE 1
Certification Exhibit FCC ID: HHC-65A261 IC: 1516A-65A261 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Report Number: 09-0411-15C Manufacturer: Home Automation Inc. Model: 65A26-1 Manual 5015 B.U.
PAGE 2
Home Automation, Inc. Zigbee Module User (Operational) Manual This document contains the intellectual property of Home Automation, Inc. (HAI). HAI authorizes the use of this information for the sole purpose of developing software and systems to work with the Zigbee Module. The specifications in this document are subject to change without notice.
PAGE 3
PAGE 4
INTRODUCTION This document describes the wireless communications of the Zigbee Module. The Zigbee Module is a portable device that allows for wireless communication between multiple Host devices. This document describes the installation process, electrical connections, electrical specifications, and the FCC statements for compliance. INSTALLATION 1.) Begin by installing the Zigbee Module in the back of the Host device. 2.) After screwing the Zigbee to the back of the Host device, power the Host. 3.
PAGE 6
FCC STATEMENTS OF COMPLIANCE Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning (Part 15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 7
OEM Responsibility OEM Responsibility to the FCC Rules and Regulations The Zigbee Module has been certified per FCC Part 15 rules for integration into products without further testing or certification. To fulfill the FCC certification requirements the OEM of the Zigbee Module must ensure that the information provided on the Zigbee Label is placed on the outside of the final product. The Zigbee Module is labeled with its own FCC ID Number.