User's Manual

ManualsBrandsHome Automation ManualsElectronicsZigbee Module

Home Automation, Inc.

Zigbee Module

User (Operational) Manual

This document contains the intellectual property of Home Automation, Inc. (HAI). HAI authorizes

the use of this information for the sole purpose of developing software and systems to work with

the Zigbee Module. The specifications in this document are subject to change without notice.

Document Number 65R10-1

June, 2009

Summary of content (6 pages)

PAGE 1
Home Automation, Inc. Zigbee Module User (Operational) Manual This document contains the intellectual property of Home Automation, Inc. (HAI). HAI authorizes the use of this information for the sole purpose of developing software and systems to work with the Zigbee Module. The specifications in this document are subject to change without notice.
PAGE 2
PAGE 3
INTRODUCTION This document describes the wireless communications of the Zigbee Module. The Zigbee Module is a portable device that allows for wireless communication between multiple Host devices. This document describes the installation process, electrical connections, electrical specifications, and the FCC statements for compliance. INSTALLATION 1.) Begin by installing the Zigbee Module in the back of the Host device. 2.) After screwing the Zigbee to the back of the Host device, power the Host. 3.
PAGE 5
FCC STATEMENTS OF COMPLIANCE Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning (Part 15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 6
OEM Responsibility OEM Responsibility to the FCC Rules and Regulations The Zigbee Module has been certified per FCC Part 15 rules for integration into products without further testing or certification. To fulfill the FCC certification requirements the OEM of the Zigbee Module must ensure that the information provided on the Zigbee Label is placed on the outside of the final product. The Zigbee Module is labeled with its own FCC ID Number.