Content Content .............................................................................................................................................. 1 1 Introduction .................................................................................................................................... 3 1.1 Acknowledgement ........................................................................................................... 3 1.2 Announcements .....................................................
9.2 Calculator ....................................................................................................................... 46 9.3 File Manager .................................................................................................................. 47 10 Recorder .................................................................................................................................. 49 11 Installation of Procedures ...............................................................
1 Introduction 1.1 Acknowledgement Thanks for your purchase of our product HM-PAN-110,is a 10inches high clear board computer. Its CPU is MT8788, it is based on Android 9.0 operation system, and easy to expand the third application procedure. 1.2 Announcements Preventive maintenance 1.3 ⚫ Please always keep the MID dry.
2 Quick Start Guide 2.1 Keys Function Keys Function Description: Power button Short press to sleep/wake up, long press to startup and shutdown. Volume +(up) increase the volume Volume -(down) decrease the volume Click it in any interface will return to main interface. HOME button (home) click it in any interface will return to previous menu Back button(back) Menu button Setting button This button will display in menu interface.
2. When screen is open, press POWER key, the screen will be closed immediately. Open the screen when it is closed. If the screen is closed, short press POWER to open the screen. The screen will be locked open it, it will show the picture as below picture, left slide to unlock and enter into camera, right slide the unlock icon and enter into Voice Search , upward slide unlock the screen. Picture 3.3-1 2.
Rotate For most pictures, you only need to rotate the MID sidewise to change the screen direction from horizon to vertical. For instance, when you are typing words, and watching movies. 2.5 Home Page Main interface as below picture 3.5-1, long press the blank and it will popup windows to set Batty volume wallpaper, folder, widgets, and shortcut. time Notice column Picture 3.
Picture 3.5-2 The shortcut icons management in desktop application. Create folder icon in desktop 1. Drag the icons need to be put together on one icon(can also overlay several icons)as Picture 3.5-3. Picture 3.5-3 2. Then click the overlaid icons, the applications can be folded, as Picture 3.5-4.
Click the unnamed folder in the black box, it will popup the hidden keyboard, the folder name can be renamed (this is similar with Apple IOS system), the icons position can be changed through long press. Picture 3.5-4 3. Long press to enter the home screen settings,as Picture 3.5-5. you can set different application icon shapes, such as square、squircle、circle、teardrop as Picture 3.5-6 Picture 3.
Picture 3.5-6 Remove the icons in desktop 1. Long press the icons need to be remove, then on the right above of the screen, it will appear icons. 2. Drag the icon to the above of the remove icon, till the icon become red, then move your finger to delete the icon. Change the wallpaper of desktop 1. In home page, long press any blank space in main screen, it will popup a window to change the wallpaper. 2. Click the gallery or wallpaper gallery to select the wallpaper.
2.6 Visit Application Procedures in right top of Picture 3.5-1, enter into main interface as Picture 3.6-1, choose the application procedure you want to visit. Click Picture 3.6-1 Return to home page PinnedShortcuts If you press an application software, you can pop-up the sub menu, and then you can use this way to use some functions of the application quickly as Picture 3.6-2 Picture 3.
2.7 USB Connection MID storage configuration Before transmitting documents, you have to conduct storage configuration for your MID: 1. Connect the MID and computer by USB cable, the reminder column will show the remind information. 2. Open the reminder board; please view the MID status and reminder to learn how to open the board. 3. In the reminder board, click the “USB for file transfer”, it will as below Picture 3.7-1, then click “File transfers”. 4. Now the USB is connected successfully. Picture 3.
2.8 Typing words Use the screen keyboard When you start the procedure or choose the words or numbers edition, it will show the screen keyboard. The keyboard contains below typing options: 1. Android keyboard Choose the typing method you want 1. Click Setting procedure application. 2. Click Language and Keyboard. 3. In the text setting area will reveal all the installed words-typing methods in your MID. 4. Tick the typing method you want. Use and switch of input method 5 1 4 2 Picture 3.
5 delete the character in the left of cursor, click and hold to delete all the characters in the left on the cursor. 2.9 Operation Technique Enter widgets interface In the application interface, click widgets on the above of screen, or slide the screen, it will switch into widgets interface. Long press any widget to create its shortcut, then you can enter into the application through the shortcut icon.
3 Basic Setting 3.1 Network and Internet Reset Wi-Fi、mobile&Bluetooth Click icon in right top of Picture , as Picture 4.1-1, select Reset Wi-Fi、Bluetooth Picture 4.1-1 3.1.1. Connect Wi-Fi 1) In the main menu or interface, choose setting application procedure. 2) Click WLAN, open wifi, MID will automatically search the available Wifi wireless internet. As Picture 4.1-3 3) Choose the Wi-Fi internet you want to connect, if it has password, it will popup the password window, enter password, click connect.
Picture 4.1-3 1.Add Network 1) Click icon in right top, as Picture 4.1-4 Picture 4.1-4 2) Input network SSID, the wireless network name, click save. 3) Click user name already saved, click connect to use network, as Picture 4.
Picture 4.1-5 2.Network Notice If you open Network Notice, when WIFI signal appears, the right bottom will remind you available WLAN network, as Picture 4.1-3 Picture 4.1-7 Check WIFI data usage Slide on the data usage page to find “Wi-Fi data usage” and click it, as Picture 4.
Picture 4.1-8 3.1-4 Network sharing and portable hotspots Portable WI-FI hotspots 1. Click setting application in main menu. 2. Click more when wifi is well connected, open network share and portable hotspot Picture 4.1-9 3. Click keep WI-FI hotspots on, choose open time. 4. Return to previous menu, open portable WLAN hotspots, click Set up WI-FI hotspots as Picture 4.
Picture 4.1-10 5.Set passwords you want to, password should be more than 8 numbers. 3.1-5 VPN Open VPN, click add VPN network, as Picture 4.1-11. Input name and server address, then save. Picture 4.1-11 Click VPN, as Picture 4.1-12, input VPN user name and password, click connect.
Picture 4.1-12 3.1-6 Airplane Mode Airplane Mode can turn off WIFI and GSM card function quickly, when airplane mode is turned on, WIFI and GSM can’t get any signal, then airplane mode is turned off, WIFI and GSM module will recover to previous state. 4.2 Bluetooth Bluetooth function operation 1. Click setting application in main menu interface 2. Click Bluetooth and open it. 3.
Picture 4.2-1 4.Click the available Bluetooth device, it will popup request window, enter into related password, and match the device to connect. 5.After match successfully, choose the operation you want to, click to enter into Picture 4.2-2. Picture 4.2-2 Bluetooth setting 1.Rename tablet Click icon in right top of Picture 4.5, as Picture 4.
Picture 4.2-3 2.Display the file you received Choose display the file you received in Picture 4.2-3, you can view download and upload files. 4.3 4.3-1 Apps & notification APPS 1. Click setting application in Apps. 2. Select application, after enter, you can manage and delete installed application. (As Picture 4.3-1) Picture 4.
4.3-2 Notification 1. Open settings, click Notification, as Picture 4.3-2 Picture 4.3-2 2. Click on any app icon in the list, then you can choose to show notifications silently, block all notifications or don’t silence or block, as Picture 4.3-3 Picture 4.
4.4 Battery Click setting function, select battery, you can view the battery situation, as Picture 4.4-1 Picture 4.4-1 4.5 Display 4.5-1 Adjust the screen brightness 1. Click Setting application procedure. 2. Click display, choose brightness, 3. Drag the portico to adjust the brightness volume, as Picture 4.
Picture 4.5-1 4.5-2 Wallpapers 1. Click setting application. 2. Click display, click wallpaper. 3. You can choose different wallpapers as you like—gallery---live wallpapers ---photos--- wallpapers (system defect), as Picture 4.5-2 Picture 4.5-2 4.5-3 Auto rotation System is defaulted as open auto rotation, when it is turned off, system won’t rotate MID screen by G-sensor.
4.5-4 Sleep 1. Click setting application. 2. Click display. 3. Click sleep. 4. Set the sleep time as you want, as Picture 4.5-3 Picture 4.5-3 4.5-5 Font size Click font size to adjust the size of the text, as Picture 4.5-4 Picture 4.
4.5-6 Display size Click Display size to adjust the size of the icons, as Picture 4.5-5 Picture 4.5-5 4.5-7 Mira Vision Mira Vision is a set of engines to enhance display picture quality. 4.6 Sound Open settings, click Sound, as Picture 4.6-1 Picture 4.
1.Vibrate In picture click Also vibrate for calls, MID will vibrate when someone calls you. 2.Volume In picture click volume, you can set ringtone, media, and alarm volume, as Picture 4.6-2 Picture 4.6-2 4.7 Storage (1)Internal storage Internal storage is MID local NAND storage, as Picture 4.7-2, if you need to check the storage content, you can check it in main menu.
Picture 4.7-1 4.8 Security&location 4.8-1 Set locked screen Lock the touch screen by unlock icon or password to protect your MID. Note: After setting screen locked, you should enter the pass code each time when you startup or screen is locked Set unlocked picture 1. Click setting application in main interface. 2. Click security. 3. Click screen lock. 4. Choose pattern in text setting area. 5. Click next following the remind message. 6.
Picture 4.8-1 Set unlock PIN code 1. Click setting application in main interface. 2. Click security. 3. Click screen lock. 4. Choose PIN in text setting area. 5. Enter new PIN code(numbers) and click continue. 6. Enter new PIN code again and click confirm. Set unlock password 1.Click setting application in main interface. 2.Click safe. 3.Click screen locked. 4.Set password in text setting area. 5.Set new password(letters and numbers) and then click continue. 6.
Picture 4.8-2 4.9 Users & accounts 1. Select setting application 2. Open account and sync, as Picture 4.9-1 Picture 4.9-1 3. Click add an account, as Picture 4.
Picture 4.9-2 4. After successfully load, it will open the sync function, as Picture 4.9-3 Picture 4.
4.10 Accessibility 4.10-1. Font size Click it to make system font large size 4.10-2. Click power button to end calls When Click call, press “power” button, call will end but not hold. 4.10-3. Touch and hold delay Click touch and hold delay to increase time, as Picture 4.10-1 Picture 4.10-1 4.10-4 Install webpage script It will allow you install webpage scrip when you open system,, but it will increase the risk when you are browsing webpage. 4.11 System 4.
Picture 4.11-1 Picture 4.11-2 Click setting, choose language and input, choose Google keyboard setting, click input language, as Picture 4.
Picture 4.11-3 Choose the language you want to change in the language list, as Picture 4.11-4 Picture 4.11-4 4.11-2 Gestures Jump to camera Operate it to open and close of this app 34 as Picture 4.
Picture 4.11-5 4.11-3 Date and Time According to the preset, system will voluntarily apply the date, zone, and time provided by internet. as Picture 4.11-6 Manual set date, time and zone 1. Click Setting application procedure. 2. Slide down the screen, then click date and time. 3. Turn off “auto setting of date and time”. 4. Turn off “auto setting zone’. 5. Click Zone Selecting, then choose the zone lists. Slide down the list to view more zones.
Picture 4.11-6 Note: If you use the time internet provided, you will not able to set the date, time and time zone. 4.11-4 backup Connect WIFI and login your google account, choose backup my data, system will backup your data into google server. as Picture 4.11-7 Picture 4.
4.11-5 System update Check to see if the system is up-to-date ,as Picture 4.11-8 Picture 4.11-8 4.11-6 Reset options If you need to recovery factory reset, please click reset, as Picture 4.11-9, if you need to formulate NAND, please click reset tablet. Picture 4.
4.11-7 Engineer Selection 1. USB debugging After opening USB bugging, you can use some software to read MID software, but when USB debugging is turned on, USB storage needs to manual adjust. 2.Stay awake If you open stay awake, it will never auto sleep when your MID is charging. 3.Pointer Location If you open pointer location, it will display touch vertical and horizontal direction. 4. Show taps If you open display touch screen operation, it will display touch operation on the screen.
5 Multi-Media 5.1 Music Enter into music player: in menu or desktop click music click the music you want to play, as Picture 5.1-1: Picture 5.1-1 icon to enter into music player, Random play Single/sequential cycle Artist Album Song name Picture 5.
5.2 ⚫ Drag the progress bar to adjust play progress. ⚫ Operation of music player button as Picture 5.1-2 Photo Gallery Photo gallery application can auto search photos and video files in SD card, and photo gallery will classify these photos and videos in folder. You can apply photo gallery to view and edit photos, set the photos as wallpaper and watch the video. View pictures 1. Click gallery application in main interface. 2. Enter into gallery, click the folder you want to view. 3.
5. If you want to give up edit, click return key, click not to return to picture browse.
6 Communication Function 6.1 Contact List Click Contact list in the main interface, enter into the contact list as Picture 6.3-1 Picture 6.3-1 ⚫ Search contact: click ⚫ Add contact: click button, enter into search function button, enter into add contact interface.
7 Internet 7.1 Browser In case of Wi-Fi or mobile internet is connected well (Please refer to Chapter 4.1 for wireless and internet setting), click IE browser in the main menu or desktop to enter the IE interface, as Picture 7.1-1 Address column Save bookmark menu Picture 7.1-1 Click address bar to input the website, click start, enter into related webpage, then you can browse the website information, as Picture 7.
Picture 7.2-2 8 other characteristics 8.1 SmartTextSelection Automatically detect the function that applies it to the corresponding application. If you click on the address of a restaurant sent to you by a friend, Google will know what you want and automatically use the map to start the route. Telephone numbers, e-mail addresses, etc. can also be done as Picture 8.
Picture 8.1-1 8.2 Auto-Fill For the most frequently used applications on the user's device, it will help the user to log in quickly without having to fill in the account name and password every time. For example, when users use a new device, they can extract saved account names and passwords from Chrome. After the selection, the auto-fill function can be performed locally. It is suitable for most applications that you may use. 9 Other Application Procedures 9.
Set alarm Picture 9.1-1 9.2 Calculator 1. Click. 2. Enter into the basic board of calculator. 3. Soft touch the numbers or operator in calulator to calculate. Pictuer9.
9.3 File Manager File manager will copy, cut, delete, rename the documents or the folder in the TF card, it also will share the files, install apk etc as Picture 9.3-1 In the main menu or desktop, click the document manager icon to enter into documents manager. ROM External SD card Picture9.3-1 a、Copy, cut, delete, rename the files and folder: choose the file or folder, long press the file or folder to enter into the interface as Picture 9.3-2, you can operate the file or folder.
Picture9.3-2 b、Paste the copy or cut file: choose the file you want to paste, icon to enter into Picture 9.3-3, Picture9.3-3 C. Share file:choose any file, long press it, it will popup “share”, choose the share way you want in the list(Picture 9.3-4) Picture 9.
d、Install apk file:Choose the file suffixed .apk in the file manager, you can install the third part software as reminder. e、Build new folder: Choose the menu you want to build the file, click icon in right top, choose new folder, you can build new folder as reminder. 10 Recorder In the main interface or desktop, click recorder icon record key to start record. Click Stop key to enter into record interface, click to stop recording. Click Play key to play the recorded sound.
11 Installation of Procedures 11.1 Installation Install the third party application procedure 1. Click “file manager” application procedure; choose the application procedure you need to install. 2. Hold the application procedure you need to install. 3. It popup install, click install apk. 4. Finish the installation as guide, it will operate. Note: The third party procedure searched from internet to use on the system are all suffixed with .apk. 11.2 Uninstall Uninstall application procedure 1.
FCC statement This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interfer ence that may cause undesired operation. *RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.