Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com info@holyiot.com Version: 1 Issued Date: 2020/05/28 Datasheet 产品名称 (Product): 产品型号 (Model No.
Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com info@holyiot.com 1. Description......................................................................................................................................3 Hardware :.................................................................................................................................... 3 Features :.....................................................................................................................................
Shenzhen Holyiot Technology Co.,Ltd 1. Description www.holyiot.com info@holyiot.com HOLYIOT-21043is based on Nordic nRF52810 Soc, the nRF52810 SoC is an ultra- low power 2.4 GHz wireless system on chip (SoC) integrating the nRF52 Series 2.4 GHz transceiver and an Arm® Cortex®-M4 CPU with flash memory. nRF52810 supports Bluetooth® Low Energy, the ANT™ protocol, and a range of proprietary 2.4 GHz protocols, such as Gazell from Nordic Semiconductor.
Shenzhen Holyiot Technology Co.,Ltd Features : www.holyiot.com info@holyiot.com ·2.4 GHz transceiver ·-96 dBm sensitivity in Bluetooth low energy mode ·Supported data rates: 1 Mbps, Bluetooth low energy mode ·-20 to +4 dBm TX power, configurable in 4 dB steps ·On-chip balun (single-ended RF) ·4.6 mA peak current in TX (0 dBm) ·4.6 mA peak current in RX ·RSSI (1 dB resolution) ·ARM® Cortex®-M4 32-bit processor, 64 MHz ·144 EEMBC CoreMark® score running from flash memory ·34.
Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com info@holyiot.
Shenzhen Holyiot Technology Co.,Ltd Application: www.holyiot.com info@holyiot.
Shenzhen Holyiot Technology Co.,Ltd 2. Introduction www.holyiot.com info@holyiot.com 2.1 Programmer HOLYIOT-21043 use the Serial Wire Debug(SWD port ), the module which layout the SWDIO, SWCLK, VDD, GND for debug and flash your own firmware, more info about the SWD, please visit https://www.silabs.com/community/mcu/32-bit/knowledgebase.entry.html/2014/10/21/serial_wire_debugs-qKCT You can using the Jlink or Jtag for programmer. 2.
Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com 3. Product Descriptions info@holyiot.com 3.
Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com info@holyiot.com 3.
Shenzhen Holyiot Technology Co.,Ltd 3.3 Pin assignment www.holyiot.com info@holyiot.com PIN No. PIN define Functions 1 P0.24 General purpose I/O 2 P0.23 General purpose I/O 3 P0.22 General purpose I/O 4 P0.21 General purpose I/O nRESET Configurable as pin reset 5 SWDCLK 6 SWDIO 7 P0.20 Serial wire debug clock input for debug and programming Serial wire debug I/O for debug and programming General purpose I/O 8 P0.19 General purpose I/O 9 P0.18 General purpose I/O 10 P0.
Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com PIN No. 27 info@holyiot.com PIN define Functions P0.02 General purpose I/O AIN0 COMP input SAADC input 28 P0.31 General purpose I/O AIN7 COMP input SAADC input 29 N.C NO connect Leave unconnected 30 P0.30 General purpose I/O AIN6 COMP input SAADC input 31 P0.29 General purpose I/O AIN5 COMP input SAADC input 32 P0.28 General purpose I/O AIN4 COMP input SAADC input 33 P0.27 General purpose I/O 34 P0.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this de vice may not cause harmful interference, and (2) this device must accept any interference received, including i nterference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s au thority to operate the equipment.
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter. 2.3 Specific operational use conditions This module is stand-alone modular.