Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com info@holyiot.com Version: 1 Issued Date: 2021/05/06 Datasheet 产品名称 (Product): BT 5.0 module 产品型号 (Model No.
Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com info@holyiot.com 1. Description ............................................................................................................................................................................. 3 Hardware : ......................................................................................................................................................................... 3 Features : ........................................................
Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com info@holyiot.com 1. Description HOLYIOT-21033 BLE module is based on Nordic nRF52832 SoC, the nRF52832 SoC is a powerful, highly flexible ultra-low power multi-protocol SoC ideally suited for Bluetooth® low energy (previously called Bluetooth Smart), ANT and 2.4GHz ultra low-power wireless applications. The nRF52832 SoC is built around a 32-bit ARM® Cortex™-M4F CPU with 512kB + 64kB RAM. The embedded 2.
Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com info@holyiot.
Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com info@holyiot.com 2. Introduction 2.1 Programmer HOLYIOT-21033 module use the Serial Wire Debug(SWD port ), the module which layout the SWDIO, SWCLK, VDD, GND for debug and flash your own firmware, more info about the SWD, please visit https://www.silabs.com/community/mcu/32-bit/knowledgebase.entry.html/2014/10/21/serial_wire_debugs-qKCT You can using the Jlink or Jtag for programmer. 2.
Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com info@holyiot.com Over-The-Air DFU The SoC is supported by an Over-The-Air Device Firmware Upgrade (OTA DFU) feature. This allows for in the field updates of application software and SoftDevice. 3. Product Descriptions 3.1 Mechanical drawings 3.
Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com info@holyiot.com PIN No. PIN define Functions 1 GND Ground 2 VCC power 3 P0.21 Digital I/O(general purpose I/O2 (Reset) Configure as the Pins reset ) 4 P0.22 Digital I/O 5 P0.23 Digital I/O 6 P0.24 Digital I/O 7 P0.25 Digital I/O 8 P0.28 Digital I/O(general purpose I/O2 (ANI4) Analog input (SAADC,COMP,LPCOMP) 9 Digital I/O(general purpose I/O2 P0.
Shenzhen Holyiot Technology Co.,Ltd www.holyiot.com (ANI5) info@holyiot.com Analog input (SAADC,COMP,LPCOMP) 10 P0.30 Digital I/O(general purpose I/O2 (ANI6) Analog input (SAADC,COMP,LPCOMP) 11 P0.26 Digital I/O 12 P0.27 Digital I/O 13 P0.02 Digital I/O(general purpose I/O2 (ANI0) Analog input (SAADC,COMP,LPCOMP) 14 P0.03 Digital I/O(general purpose I/O2 (ANI1) Analog input (SAADC,COMP,LPCOMP) 15 P0.
Shenzhen Holyiot Technology Co.,Ltd 30 31 www.holyiot.com P0.17 info@holyiot.com Digital I/O(general purpose I/O ) P0.18 Digital I/O(general purpose I/O TRACEDATA[0] / SWO Single wire output, Trace port output) 32 P0.19 Digital I/O(general purpose I/O) 33 P0.20 Digital I/O(general purpose I/O Traceclk Trace port clock output ) 4. Mounting our board on the host PCBA We suggest that you mount our RF board(HOLYIOT-21033 -nRF52832) on the board like that: 1.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this de vice may not cause harmful interference, and (2) this device must accept any interference received, including i nterference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s au thority to operate the equipment.
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter. 2.3 Specific operational use conditions This module is stand-alone modular.