2+5 6PDUW EDQG ,PSXOVH User Manual V1.
HOLUX OHR Smart band I mpulse 8050 Safety instructions • Read this manual carefully before use to ensure safe operation of the device. • The device is not a medical device and only used for the measurement in normal exercises. Make sure the device is worn in the correct measuring position. If you feel uncomfortable during the exercise, stop and seek medical advice immediately. The user must use the device carefully and it is up to the user rather than HOLUX to take all safety responsibilities.
HOLUX OHR Smart band Impulse 8050 waterproof function; - Do not rinse the device directly under a faucet to avoid affecting or damaging the waterproof function. • Do not remove or replace the battery. Only well trained service personnel are allowed to disassemble/install the internal components. Note: Explosion may occur if the battery is not replaced with a new one of the same model or equivalent type. Contact the manufacturer to dispatch professional service personnel for battery replacement.
HOLUX OHR Smart band Impulse 8050 Warranty Statement • This warranty applies to parts and services that are manufactured and sold through HOLUX. The warranty length is one year from date of purchase (starting from the date on the sales receipt). Under normal user operation, HOLUX provides free repair services. • HOLUX is not responsible for providing repairs or replacements of any software; HOLUX does not provide any warranty service for third party software/hardware. • Important instructions 1.
HOLUX OHR Smart band Impulse 8050 4. The content of this user manual is subject to change without prior notice. Please contact us if you have any question or notice any errors in descriptions in the user manual.
HOLUX OHR Smart band Impulse 8050 Copyright Information No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any mean, without the express written permission of Holux Technology, Inc. Copyright, All Rights Reserved.
HOLUX OHR Smart band Impulse 8050 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HOLUX OHR Smart band Impulse 8050 authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Warning The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.
HOLUX OHR Smart band Impulse 8050 Content Product Introduction .................................................... 9 Product Overview ........................................................ 10 Key function ............................................................... 11 Accessories ................................................................. 12 Charging the Battery.................................................... 13 Wear the Smartband ....................................................
HOLUX OHR Smart band Impulse 8050 Product Introduction Thank you for purchasing HOLUX Heart-Rate Smartband Impulse 8050. Impulse 8050 is a smartband designed for people who are in pursuit of a healthy lifestyle and convenience in exercising. It has the most advanced integrated physical monitoring technology and can accurately measure the heart-rate for long periods continuously so that users can monitor their heart and lung functions and exercise effectiveness.
HOLUX OHR Smart band Impulse 8050 Product Overview Front View Screen Function Switch Key Rear View OHR Charging p ort 10
HOLUX OHR Smart band Impulse 8050 Key function Key Operation and Function Switch function: Press the key for 1 second to switch Time/ Step/ Heart-rate/ Fatigue function. Enable/ disable function: In Heart-rate and Function Switch Fatigue function page, press and hold the Key key for 3 seconds to Enable/ disable the Heart-rate and Fatigue function. Press and hold the key for 12 seconds to reset the system if the device cannot operate normally.
HOLUX OHR Smart band Impulse 8050 Accessories Check the box for the following supplied accessories. If any is missing, contact your supplier immediately.
HOLUX OHR Smart band Impulse 8050 Charging the Battery Before using your Impulse 8050 for the first time, you need to charge it for approximately 2 hours. As following figure, clip the Impulse 8050 into the charging cradle, ensuring that the metal terminals are in contact. Using the AC charger or connect to the USB port of the PC for charging. ※ Make sure the product is placed in the correct direction; otherwise, the product or the cradle could be damaged.
HOLUX OHR Smart band Impulse 8050 Using the AC charger (Optional) Connect the cradle to the optional AC adapter, then insert the AC adapter into a power outlet. Connecting to a PC Insert the cradle's USB cable into a free USB port on your PC.
HOLUX OHR Smart band Impulse 8050 Wear the Smartband When using Impulse 8050, wear your device on the wrist below the wrist bone as shown in the following figure. To measure the heart rate correctly, make sure the strap fits snugly around the wrist to ensure the wristband is pressed against the skin. Wrist bone Maintenance of the product • You can use a damp cloth to wipe the wristband or use gentle soap solution to remove oil or dirt. • Use a wet cotton swab to clean the area around the sensor.
HOLUX OHR Smart band Impulse 8050 How to use Impulse 8050 Make sure the battery is fully charged (charging time: about 2 hours) before using the product to ensure normal operation of the system. When using the device for the first time, long press the [Function Switch Key] for 6 seconds to enable the device.
HOLUX OHR Smart band Impulse 8050 Menu function The time page appears once you start to use the device. Press the [Function Switch Key] to switch function pages. The following table lists the available functions. Main screen Time Function: Display current time. ※ Time calibration: using the Bluetooth connection, Impulse APP can be used to calibrate time. Step Function: Calculate and record the number of steps users have walked.
HOLUX OHR Smart band Impulse 8050 function is enabled, the icon will be displayed as “solid”. → ※ After enabling the heart-rate measurement function, please first remain stationary for about 20-30 seconds. A big and small heart symbol (beating continuously) will be displayed on the screen. When the device detects heart-rate status, the device will vibrate for 3 seconds. The screen will also display the number and zone of heart-rate. → ※ The Impulse APP can be used to set heart-rate zone.
HOLUX OHR Smart band Impulse 8050 after 2 minutes of detection, the device will disable detection automatically. Please verify the position where the smartband is worn and perform the measurement again. Then, wait until the smartband detects the heartbeat before starting normal activities. → Fatigue Detection: Display the number of fatigues. ※ Enable/ Disable Fatigue Detection: In the fatigue detection function page, press and hold the [function Switch Key] for 3 seconds to Enable/ disable the function.
HOLUX OHR Smart band Impulse 8050 Bluetooth connection and battery status: Display the Bluetooth connection and power status. ※ When pairing with Bluetooth, the screen will display a link symbol. ※ Power level display: Power level 65~100%; Power level 35~65%; Power level 10~35%; Power level <10%; a low power message appears. Low Power：In low power status, short press [Function Switch Key] will only enter Time function.
HOLUX OHR Smart band Impulse 8050 charging, short press [Function Switch Key] is not work. After charging is completed, the screen will show battery status page. Legends Insufficient memory space: indicates the memory usage is more than 90%. Short press [Function Switch Key] to close the page. This page will appear every ten minutes, until synchronize/ upload data to APP and memory usage is less than 90%.
HOLUX OHR Smart band Impulse 8050 APP Installation Using the Bluetooth connection, this device can be used with the Impulse APP installed on your smartphone. The Impulse APP can be used to display related activity and training records. Step 1: On your smartphone, go to the Google Play Store, search for the “Impulse” APP. Then download and install the APP. ※ Please confirm that both the “Internet Communication” and “Bluetooth” functions on the smartphone are enabled.
HOLUX OHR Smart band Impulse 8050 Register and Login → → Device pairing and binding (make sure the Bluetooth functions on both the smartphone and Impulse 8050 are enabled) → → ※ If you do not want to bind to a device, select “Ignore and Next”.
HOLUX OHR Smart band Impulse 8050 Basic Data Setting → → → → → You can start using the Impulse APP after completing the settings.
HOLUX OHR Smart band Impulse 8050 Remove Device Pairing and Binding The device information under the “Setup” function can be used to remove device binding.
HOLUX OHR Smart band Impulse 8050 Normal Care and Maintenance To ensure the unit’s normal operation and extended life span, please note the following while using and storing: • Do not drop the unit If violently impacted or shocked, serious damage may be caused. • Avoid sudden temperature changes Condensation may occur when entering a warm room on a cold day. To prevent condensation from damaging the unit, please place into an airtight plastic bag before sudden temperature changes.
HOLUX OHR Smart band Impulse 8050 Please do not disassemble the product, this may void the warranty and damage the unit. • Storage When the product is not being used for a long period, store the device in a cool and dry place. For long-term storage, keeping the unit in a dry box is recommended. Please do not keep the product in the following environments: • Unventilated and humid locations. • In an environment where humidity is over 90%.
HOLUX OHR Smart band Impulse 8050 Specification Processor Low power 32bit processor Memory 4MB for activity log Display 0.5” OLED screen Sensor Optical Heart Rate (OHR) Sensor G-sensor Bluetooth 4.0 low energy (BLE) Battery Rechargeable Li-ion Time mode: 11 days (Disable heart-rate measurement function) Normal operation: 6 days (Enable heart-rate measurement function on average one hour per day) Continuous OHR Mode：10 hours Dimension 56.5(W)x21.
