HOLO-18 HOLO-26 HOLO-50 HOLO-65 USER MANUAL
SAFETY WARNINGS DO NOT TOUCH THIS DEVICE WHEN IT IS IN OPERATION! YOU WILL BE INJURED DUE TO ANY VIOLATION OTHERWISE! 3D Hologram Display Solutions Hologruf, Inc.
ATTENTION: Do not disassemble the device, nor replace the TF card without permission! Any violation will void manufacturer’s warranty.
Packaging List Goods Quantity Main Display 1 Power adapter 1 Remote control 1 Wall mouting parts 1 Gaskets 6 User manual 1
Product instruction The Holo-65 or Holo-26 is one of Hologruf displays empowered by a fully-patented Persistence of Vision (POV) technology that rotates images or videos through one belt of ultra-high-density LED lights and presents in 3D hologram visual effects. This device comes with the characters of ultra-thin exterior design, ultra-low power consumption, ultra-high attractiveness, and design for portable.
Description of back interfaces 1 Indicator light 2 Settings button 3 Slave interface2 4 Slave interface1 5 Power interface 1 Indicator light: Indicates the power, ON/OFF, Mode-switching and so on. 2 Setting button: Switching Mode, Pairing remote control . 3 Slave interface: Used in slave mode (See "Slave mode") 4 Power interface: Plug in the power adapter.
Remote control instruction 1 ON RUN 3 Previous STOP 2 OFF 4 Next 1 5 Repeat 6 Brightness 25% 50% 100% control area 1 ON:Turn on the device, switch stand-by status to operating status 2 OFF:Turn off the device, switch operating status to stand-by status 3 Previous:Play the previous content from the list 4 Next:Play the next content from the list 5 Repeat:Repeat to play the current content Bri 6 Brightness control:This feature might not be availabl
Operation 1 Connect power: After plugging in the power adapter to the device, you will see the LED lights lit up, also the indicator light on the back panel will be on in red. 2 Remote Pairing: When the display is in the standby mode, press the “Setting” button on the backplane. The indicator light will change in color from red to blue. Then, point the remote control to the display, then press and hold the “100%” button till the blue light flashes and turns into red.
Play contents 4 To play a different content: Point the remote control to the display, and press “>>” to play the next content from the playlist. Point the remote control to the display, and press “<<” to play the previous content from the playlist. Host vs. Slave mode 5 The display can be set to Host mode or Slave mode. By default, the host mode displays the content as a single device. While in the slave mode, the display needs to be connected with another display that is in the host mode.
Four displays networking example host mode slave mode slave mode slave mode Hologruf Mobile App 6 The “Hologruf’ mobile app (iPhone and Android apps) is dedicated for controlling (turn on/off) the Hologruf displays and managing content playing (content uploading, deletion, playlist, and etc.).
Installation instruction Holo-26 and Holo-65 displays can be installed on wall. 1 Wall-hung fixing part Installation diagram Mounting parts You need expansion screws or common screws to install the mounting parts on the wall first prior to mounting the display to the wall. You need three gaskets between the wall and mounting parts to minimize any potential movement of the mounting part after the installation of the display.
PC Applicaiton for device conrol & content management
Operation 1 Download software Download the PC software from http://www.hologruf.com HOLOGRUF The device is not connected, please check the network off on Model: Select the model The device is not connected SD card remaining capacity: 4G 2 Connect the device Playlist Screen brightness Connect the device Inquire malfunction Timing Install software Download the software package, unzip file “PC_Hologruf+version No.zip”, double click “POV.
HOLOGRUF The device is not connected, please check the network off on Model: Holo-65 The device is not connected SD card remaining capacity: 4G 3 Connect the device Playlist Screen brightness Connect the device Inquire malfunction Timing Connect the device PC needs to be connected to the Hologruf device via WiFi. Select the device model to connect the device,if it displays “connection failed”, click the button “Inquire malfunction” to check the error.
HOLOGRUF Edit Add File Name off on Up Down Size Cycles xxx.mp4 1.1M 1 xxx.jpg 1.1M 1 xxx.mp4 1.1M 1 Empty Operation The device is connected 5 SD card remaining capacity: 4G Connect the device Playlist Screen brightness Timing Playlist 1 Edit: Select the corresponding playback file, click the Edit button, modify the repeat times. 2 Add: Click the Add button, you will see the select option, select the content you want to play.
HOLOGRUF Screen brightness off 6 7 on The device is connected SD card remaining capacity: 4G Connect the device Playlist Screen brightness Timing Screen brightness Move the bar indicator to adjust the brightness. HOLOGRUF Timing off 7 on The device is connected Timing start-up 0 0 :0 0 :0 0 SD card remaining capacity: 4G Timing shutdown Connect the device 0 9 :2 1 :0 0 Playlist Screen brightness Timing Timing Enter your schedule to turn on or turn off the Hologruf display.
The Hologruf Mobile APP for device control & content management
Operation 1 Software downloads Download the “Hologruf” iPhone app directly from Apple app store. Also the “Hologruf” Android phone app can be downloaded directly from the Google Play app store. Wifi connection 2 Power on the Hologruf device, and wait no longer than 3 mintues, you should be able see the device shows up on the Wi-Fi list, being listed as e.g. Hologruf...-. Type in the Wi-Fi password to connect securely.
4 Connect device Upload Video and Image 5 The deviceis is connected After connecting to the Hologruf device via Wi-Fi, click "ON" to turn on the device. Open the playlist, choose ,click the upload button to select the file, enter the file name and click OK. off on The device is connected off on Playlist xxxx.mp4 Cycles :1 The device is connected 6 Empty the playlist off Empty the playlist : Click the emptying button on Playlist xxxx.
Delete single file: 7 1 8 Left slide the corresponding file, the Delete button will appear, click the button to complete xxxx.mp4 Cycles:1 xxxx.mp4 Cycles:4 xx.mp4 xxxx.mp4 Cycles:1 xxxx.mp4 Cycles:4 xx.mp4 Cycles:6 xxxx.mp4 Cycles:10 File Name: xxxx.mp4 Cycles: Cycles:6 Cancel xxxx.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.