LARK 150 User Manual V1.0.
FOREWORD Thank you for purchasing Hollyland LARK 150 wireless microphone. Please read this instruction carefully before using the product. Wish you have a pleasant experience. KEY FEATURES 5ms Latency with up to 100m Range 2 TX & 1 RX Combo 2.
PACKING LIST ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ PACKING LIST OF TWO TRANSMITTERS AND ONE RECEIVER ① Charging Case ② Transmitter ③ Receiver ④ Furry Windshield ⑤ 3.5mm TRS Cable ⑥ USB Type-A to Type-C Cable ⑦ Lavalier Microphone ⑧ User Guide x1 x2 x1 x2 x1 x1 x2 x1 * The exact quantity may vary on products configuration. Please take the actual quantity as standard.
PRODUCT INTERFACES ①② ③ ④ ⑥ ⑦ ⑤ ⑧ A A TRANSMITTER ① Power Indicator (Red: Low Battery, Green: Safe Battery Status, Orange: Charging) ② Link Indicator (Blue/Cyan Flashing: Disconnected, Blue/Cyan: Connected, Orange: MIC Mute) ③ In-built Microphone ④ 3.
PRODUCT INTERFACES ① ② ④ ③ ⑤ ⑥ ⑧ ⑨ ⑩ ⑦ ⑪ B B RECEIVER ① Link Indicator (Left Channel) ② Display Screen ③ Link Indicator (Right Channel) ④ Volume Knob (Left Channel):Adjust the Volume of the Left TX /Recording Mode Switch Button: Press to Switch the Recording Mode /Left TX Mute Button: Click to Mute the Left TX ⑤ Volume Knob (Right Channel): Adjust the Volume of the Right TX /Channel Switch Mode: Press to Switch the Channel when Stereo Mode /Right TX Mute Button: Click to Mute the Right TX ⑥ P
PRODUCT INTERFACES ① ②③ ④ ⑤ ⑥ C C CHARGING CASE ① Power Indicator (Red: Low Battery, Green: Safe Battery Status, Orange: Charging) ② USB Type-C Port for Charging ③ Reset Button ④ TX Charging Slot ⑤ RX Charging Slot ⑥ TX Charging Slot 5
PRODUCT INSTALLATION ① ③ ② ④ ① Press Power Button of TX/RX for 3s to switch on. ② Install TX as Figure2. ③ Install RX on the Camera. ④ Connect the 3.5mm Audio output port of RX with 3.5mm Audio input port of the camera by 3.5mm TRS cable.
DISPLAY INTRODUCTION ① ③ ④ ⑤ ② Stereo ① ⑥ ⑦ ⑧ ③ A A ② CASE TX RX ④ TX ⑤ B DISPLAY OF RX ① Current Recording Mode of RX ② RX Battery Status ③ Cyan TX Signal Strength Status ④ Cyan TX Battery Status ⑤ Cyan TX Input Volume Status ⑥ Blue TX Battery Status ⑦ Blue TX Signal Strength Status ⑧ Blue TX Input Volume Status The TX color displayed on main display screen of RX relates to the channel switch and recording mode, the indicators of RX represents the corresponding TX B DISPLAY OF RX CHARGING CAS
OPERATING GUIDENCE ① ① PAIRING 1.Put TX and RX into the charging case at the same time, the unpaired devices will be paired automatically. 2.Display “√” when pair successfully. 3.Display “X” when pair failed.
OPERATING GUIDENCE CASE TX RX TX ② ② CHARGING 1.It means low battery when the power indicator or the battery icon of RX display screen is red. 2.TX and RX will be charged when placed into charging case. 3.The indicator of TX will display orange when charging. After placed into the charging case, TX, RX and charging case's current battery status will be displayed on the screen of RX. 4.When TX and RX are fully charged, the devices will automatically enter sleep mode. 5.
OPERATING GUIDENCE ③ Mono Mode 1.After taking out, start up and successfully paired TX and RX. 2.Long press left button for 3s to recording mode. Switch successful when the screen displayed “Mono”. 3.At this time RX switched to mono mode, both left and right channel outputs two audios of TX. 4.Volume of TX corresponds the indicator could be adjustable at this time by knob. ④ Safety Track Mode 1.After taking out, start up and successfully paired TX and RX. 2.Long press left button for 3s to recording mode.
PARAMETERS Interfaces TX: 3.5mm Audio Input Port Charging/Upgrading Contacts RX: 3.5 mm TRS Output Interface 3.5mm Headset Interface Charging/Upgrading Contacts Charging Case: USB Type-C Interface Frequency Bandwidth 2.
SUPPORT If encounter any problems in using the product or need any help,please follow these ways to get more technical support: support@hollyland-tech.
support@hollyland-tech.