2019-06-05 Wednesday 10:35:42 1 2 4 5 3 6 7 8 9 0 Smart Security System USER’S GUIDE
CONTENTS 1 1 1 DO THIS FIRST Things to be Noted Before Getting Started What You Need 2 3 3 4 4 9 10 10 11 IN THE BOX MEET YOUR ALARM SYSTEM How the Alarm System Works Getting to Know Your System Smart Hub Remote Tag RFID Tag Door/Window Sensor PIR Motion Detector 13 13 13 14 PLACEMENT/INSTALLATION Where to Place/Install Smart Hub Where to Place Door/Window Sensor How to Install PIR Motion Detector 15 15 15 15 16 16 17 17 18 18 18 GETTING STARTED Install the SIM Card Cellular Network Connection How to
DO THIS FIRST. Things to be Noted Before Getting Started This guide is for: Hub cellular model ( Hub 2G model, Hub 4G model ) Hub cellular + Wi-Fi model ( Hub 2G+Wi-Fi model, Hub 4G+Wi-Fi model ) Please check the following conditions for a successful set-up: If using 4G SIM card, make sure the 2G network of your wireless service provider is still available in your country. You should purchase the hub with 4G cellular communicator if the 2G network is unavailable.
IN THE BOX. 2019-06-05 Wednesday 10:35:42 1 2 4 5 6 7 8 9 3 0 Smart Hub (Panel) Alarm, display and keypad. RFID Tags x2 (Optional) Key fob to quickly arm and disarm your home. PIR Motion Detector x1 Senses when someone walks nearby. Remote Tag x2 Wireless key to quickly away-arm, home-arm and disarm your home, and to trigger an emergency alarm. Door/Window Sensor x1(x2 optional) Senses when a door or window is opened. Wireless Siren (Optional) Sounds when the alarm goes off.
MEET YOUR ALARM SYSTEM. How the Alarm System Works 2019-06-05 Wednesday The hub receives the command and enters “Armed” mode. 10:35:42 1 2 3 4 5 6 7 8 9 0 Arm the system by the remote, RFID tag, the ARM button of hub touchscreen or the APP. When a Door/Window Sensor detects a door/window is being opened, the sensor sends a signal to the panel letting the hub know that there has been an intrusion.
Getting to Know Your System The hub cellular+Wi-Fi model is a dual network system that utilizes both Wi-Fi and cellular(GSM/4G). All sensors are wirelessly connected to the hub. In the event of alarm activation, for example, when a sensor is triggered, a push notification will be sent and an alarm call will be made automatically to all registered users. The system can be controlled on-site by the remote tag supplied, or remotely from anywhere with our free dedicated mobile application.
Home screen Your home screen may look different if you use another version of hub. Top status bar Arm/Disarm status Bottom status area for countdown bar, alarm information and clock. RFID read zone 2019-06-05 Wednesday 10:35:42 Status bar The icons in the status bar at the top of the screen shows information about the hub.
Arm/Disarm status Here’s the Arm/Home Arm/Disarm status of system. What you see What it means System is AWAY ARMED. System is HOME ARMED. System is DISARMED. Alarm information Display what happened in case of alarm. Countdown bar Clock is shown without countdown process. What you see What happens and what you should do Please exit You now have xx seconds to leave home before the Exit Delay expires. When Exit Delay is completed, the alarm system is armed.
Human Voice Turning Human Voice(5) on or off(default:on) Door/Window Open Warning Turning warning notification on or off if you leave a window or door open and arm (default: on).
Siren Learn Sending a transmission signal to the wireless siren be paired Alarm Socket Pairing a wireless switch that syncing on/off with the siren Socket Timer Setting a schedule(in 24-hour) for opening/closing wireless switch automatically Decoder Read the serial number of detector from its transmitting signal. You can know which wireless accessory were paired in your hub by this tool.
should disarm the system immediately. 2 Arm Beep When it is turned on, the external siren will beep when armed or disarmed. 3 Keypad Lock For additional security, you can require a passcode to unlock the panel. When it is turned on, if you don’t operate the keypad on the panel for 30 seconds or so, the home screen locks automatically. 4 Backlight When it is turned off, if you don’t operate the keypad on the panel for 30 seconds or so, the home screen backlight turns off automatically.
RFID Tag RFID tag lets you arm or disarm without entering a password. Disarm with a tap Tap and hold RFID tag on the RFID zone of your panel to arm or disarm when you’re leaving and coming home. 2019-06-05 Wednesday 10:35:42 3 1 2 4 5 6 7 8 9 0 Key loop Attach to your key ring. Door/Window Sensor Door/window sensors are set to Stay Arm Active mode in default and are ideal for protecting entry/exit locations, such as front/back doors and all windows.
Mounting strips Attaches sensor and magnet to a flat surface. PIR Motion Detector The motion detector is designed for the usage on interior walls and is set to Out Arm Active Mode in default. Whenever the sensor detects movement (only while the alarm is armed), a push notification including the sensor name will be automatically sent to the registered users, and the alarm will sound. LED Indicator Blinks for 30 seconds after detector powers on. Lights up when there’s motion in the room.
Setting jumpers Power on/off Slide it up to ON to power up the detector. Battery receptacle Contains three AA 1.5V battery. Inside view Setting Jumpers OPEN CLOSED Setting the Pulse Counter (PULSE2 & PULSE1 jumpers) The motion detector is equipped with a programmable pulse counter which can be set to count 1,3 or 5 pulses. Place the pulse count jumpers at the desired setting as shown below.
PLACEMENT/INSTALLATION TIPS Where to Place/Install Smart Hub It should be close to where you come and go. So it’s easy to access on your way in and out. 2019-06-05 Wednesday 10:35:42 2 3 4 1 5 6 7 8 9 0 Find a spot with a good Wi-Fi and cellular signal. The hub needs a Wi-Fi Internet connection (hub cellular+Wi-Fi only) and cellular network so it can send notifications and text message to your phone. Use an unswitched wall outlet.
How to Install PIR Motion Detector Mounting height Motion Detector must be mounted 79 to 87 inches(2 to 2.2m) above the floor. Mount the bracket with the included screws as shown above. Then place the motion detector in the bracket. Specify the right direction of the detection range of the motion sensor. Test the operation of the motion detector by putting it into testing mode which has been described at the former page.
GETTING STARTED Install the SIM Card Important: A regular SIM card is required in order to use cellular services when connecting to cellular networks. The availability of cellular capabilities depends on the wireless network. Cellular Network Connection If the cellular indicator at the top of home screen turns white, your hub is connected to a cellular network. Important: If the gray or is always shown, the hub has not connected to a network.
Exit / Entry Delay Entry Delay and Exit Delay are countdowns that allow you to enter and leave your home easily without causing the alarm to sound. Exit Delay Exit Delay allows you to leave your home once you’ve armed the security system. When you place the system into Away Arm Mode, it makes a countdown tick to let you know that it is preparing to arm. Once the Exit Delay period ends, the system is armed.
How to Pair a Remote Tag by the Panel Go to Menu>Parts>Remote>Add and enter. You need to enter a digit from 0 to 9 to designate a unique number for the remote tag to be paired. Synchronizing is shown, the hub goes into the paring mode and count down the pairing time remaining. Press any button of remote tag to send a transmission signal to the hub. As the serial number of remote tag is added to the hub, Leaning OK will be shown.
How to Pair a RFID Tag by Panel Go to Menu>Parts>RFID>Add and enter You need to enter a digit from 0 to 9 to designate a unique number for the RFID tag to be paired. Synchronizing is shown, the panel goes into the paring mode and count down the pairing time remaining. Tap the RFID Tag on the RFID read zone of your panel. As the serial number of RFID Tag is added to the hub, Leaning OK will be shown. The hub will show Device code has been learned if serial number of RFID Tag has been learned.
APP Download App Scan the QR codes via a smart phone to download and install the application. Your App may look different if you purchased the different hub model. APP for Hub Cellular Model For hub cellular model, you can arm, stay arm, disarm your system by sending text messages using the APP. You can also name your accessories, set Phone Number, Change Exit/Entry Delay or Enable/Disable some features, and more by APP.
USING SMART SECURITY SYSTEM. The Security Levels Smart Hub has three different security levels you’ll use when you’re home or away. You can easily switch between them on Smart Hub or with RFID tag, remote tag, or the app. WHAT WHAT YOU HEAR HAPPENS WHAT’S DETECTED Motion Open NOTIFICATIONS and CALLS “Please input password” “System Armed” The alarm sounds when a door or window opens, or when there’s motion in a room. √ √ √ Home Arm Use when you’re home and want security.
How to Arm and Disarm You can arm and disarm your home in three ways: entering your passcode on the panel if it is locked and press Arm/Stay Arm/Disarm icons, tapping RFID Tag on the panel, or using the remote tag, or app. When you hear the panel’s chime alert, the screen will also show you a countdown so you know how much time you have before the alarm sounds. No Rush With No Rush, you can take the time you leave home or disarm before the alarm sounds. By default, you have 40 seconds.
Schedule You can set an arm schedule and a disarm schedule to arm or disarm the system automatically at a daily time. Go to Menu>Timer>Arm Timer/Disarm Timer and enter Scroll to and tap ► to enable keypad, enter the Daily Arm/Disarm time (in 24-hr) and tap √ to enter. Scroll to Press √ to save your schedule. Arm Schedule 20:12 on and tap ► toggle to ‘on’ to enable the schedule. Make a Call on Panel On the home screen, tap , enter the number, then tap √ to dial.
SPECIFICATIONS Hub Power Supply: Micro USB 110/220VAC to 5V, 1000mA Backup Battery: 3.7V, 500mAh Rechargeable Lithium Battery Consumption: <55mA@normal Radio Frequency: 433Mhz GSM: 850/900/1800/1900MHz Wi-Fi: IEEE802.