User Guide

SECURITY SYSTEM
APP QUICK START GUIDE
Scan the QR code or find
“TuyaSmart” on APP Store or
Google Play to get free APP.
LOG IN
Upon download and installation of App on your phone, please
follow the on-screen prompts to register and login to add your
hub.
ADDING YOUR HUB
1. Smartlink Configuration
↓ Tap Add Device or “+” , select Security & Sensor and tap
Alarm.
↓ On your hub, tap √ to go to Wi-Fi > Smartlink Configure ,
make sure your device is in SmartLink mode with LED is
blinking rapidly.
↓ Tap Confirm indicator rapidly blink, choose your local
Wi-Fi and input password(Only 2.4Ghz Wi-Fi network is
supported).
↓ Wait the configuration finishes, tap Done.
2. SoftAP Mode
↓ Please change to Soft AP mode if the configuration fails in
SmartLink mode.
↓ Tap AP Mode at Add Device page.
↓ On your hub, tap √ to go to Wi-Fi > SoftAP Configure,
make sure your device is in SoftAP mode with LED is
blinking slowly.
↓ Tap Confirm indicator slowly blink on your APP, choose
your local Wi-Fi and input password(Only 2.4Ghz Wi-Fi
network is supported).
↓ Tap Confirm > Go to Connect, then choose the Wi-Fi
hotspot named “Smartlife-XXXX” in your Wi-Fi list. Go back
to your APP to wait the Wi-Fi configuration finishes, then tap
Done.
Tips: after the configuration is done, you might tap > Share
Device to share your hub with your family.
HOW TO ADD PHONE NUMBER
↓ Tap Setting > Alarm call number in Contact column to add
phone numbers for alarm call.
↓ Tap Setting > Alarm SMS number in Contact column to
add phone numbers for alarm SMS.
↓ Tap Alarm call to turn alarm call on or off.
↓ Tap Alarm SMS to turn alarm SMS on or off.
Tips: up to 5 alarm call numbers and 5 alarm SMS numbers
can be added.
HOW TO ADD ACCESSORY
Pick your device at home page, tap Accessories > Add, then
follow below tips to trigger your accessory to be added (After
the accessory is added, it will be classified to each
corresponding column automatically)
Tips
:
up to 100 wireless detectors, 10 remote tags and 10
RFID can be added,
EXIT / ENTRY DELAY
Change Delay Value
Tap Exit delay or Entry delay to change the delay time
Tips: default exit delay is 40 seconds and entry delay is 30
seconds
HOW TO ARM/DISARM
Tap to Away arm
Tap to Home arm.
Tap to Disarm
Tap to trigger an emergency alarm.
Tips: tap Setting > Timer to arm/disarm your system on
schedule.
More details about using your security system, please
refer to USER’S GUIDE.
To
Do like this before the hub sniffer
countdown expires
Add a wireless
sensor
Press the panic button or
separate the sensor from
the magnet by at least 1.0
inches(2.5 cm)
Press the pairing button or
trigger it with an motion
Add a remote
Tag
Press any button on your
remote tag
Add a RFID
tag
Tap RFID Tag on the RFID
read zone on your hub
SOS
2
5
6
7
8
9
3
0
sday