Multi 3-Axis Stabilizing Gimbal for Compact Digital Camera User Guide V1.0 @Hohem-Tech Get more tutorial video Any Question: service@hohem-tech.
Product Overview Roll 320° Tilt 320° 12 1 13 2 3 14 15 4 Pan 600° 5 6 7 8 16 9 10 1/4 Inch Screw Hole 11 02 1.Tilt Motor 2.Thumb Screw 1 3.Mini USB（camera control) 4.Pan Motor 5.Bluetooth Light 6.Joystick 7.Slider 8.Mode Light 9.Mode Button 10.ON/OFF（Shutter Button） 11.Handle（Batter y inside） 12.Roll Motor 13.Quick Release Plate 14.Thumb Screw 2 15.Quick Release Plate Bolt 16.
17 17.Thumb Screw 3 18.1/4 Inch Screw Hole 1 19.Trigger Button 20.USB Por t 21.
04
Camera/Phone Mounting Camera Mounting: CAUTION Please mount your camera/phone before turning on the gimbal. * Some action cameras must add an adaptor with 1/4 screw hole. 1. Mount the quick release plate on camera. 2. Insert the camera with quick release plate(A) into the slot of clamping plate(B) and tighten the thumb screw Supported Cameras: 1.Digital Camera: SONY RX100 series, Canon G series,Panosonic DMC-LX10 2.Action Camera: GoPro Hero series, A B SONY RX0 series, SONY X300, YI CAM, SJCAM 3.
Balancing It is recommended to turn on the camera before balancing it on the gimbal. 3.Balance the camera through left and right Slide the roll arm to balance the camera through left and right, tighten the thumb screw after the camera is well balanced. 2.Balance the camera through up and down 3 1.Balance the camera 2.
Slider : *Zoom in & out(SONY Multi cable is require to get connection with SONY camera on this function.） *Focus (It is available when gimbal is connected with app for smar tphone.） ON/OFF (Long press for 3s) Shutter : Tap to take photo/Double tap to record （SONY Multi cable is require to get connection with SONY camera on this function; For smar tphone mounted on the gimbal,this function is available when gimbal is connected with app.
08
App “Hohem Gimbal” Instruction ● Scan QR code to download the app. ● Hohem Gimbal suppor ts iOS 9.0 and Android 5.0 or above. ● Search for 'Hohem Gimbal' in the App Store or Google Play and follow the instructions to install the app. Bluetooth Connection: 1. Enable the bluetooth of smartphone and turn on the gimbal.（Make sure the device is mounted on the gimbal） 2. Open the App “Hohem Gimbal” and choose the correct product model “iSteady Multi”to connect. 3.
Enter into the main function interface of smar tphone in the App 10
App “Hohem Gimbal” Instruction Enter into the main function interface of smar tphone in the App 1.Home 2.Setting 3.Front/Rear camera 1 9 2 10 3 11 4 5 4.Flash 5.Camera Setting 6.Album 7.Object Tracking 8.Zoom & Focus 12 7 8 13 6 9.Bluetooth 10.Face Tracking 11.Shutter Button 12.Panorama 13.
App “Hohem Gimbal” Instruction Other App Functions 1.Gimbal Specs Setting： A.Following Speed （To adjust the following speed of pan/tilt/roll axes） B.Joystick Speed （To adjust the rotating speed by control the joystick） C.Following Dead Area（No following movement when the rotate angle is less than dead area setting） D.Trim（To adjust the tilt/roll axis in small angle to get a perfect balance） E.Joystick Reverse（To reverse the rotation direction by control the joystick） F.
Calibration It requires to calibrate the gimbal if you notice it is not work properly as below. 1.The pitch angle is not level with the horizontal surface. 2.The roll angle is not parallel to the horizontal surface. 3. The pan axis drifts when the gimbal is on all lock mode. Calibration Instruction Method 1：Off-line Calibration （1）Power on the gimbal, long press the mode button over 6 seconds till the mode light on. （2）Laying the gimbal on a static flat surface without any vibrate.
Firmware Upgrade Please make sure the gimbal is connected with app via bluetooth successfully, then enter the “Firmware Upgrade” and follow the instruction to upgrade the latest firmware. FAQ Q: Why the gimbal vibrates after powering on? A: Make sure your camera is mounted firmly and well balanced before powering on the gimbal, do not turn on the gimbal without a balanced load, as doing so many damage the motors, please refer to page 5. 6 for more details.
Parameters Weight 530g include batter y Main Material High performance composite 400g Payload Suppor ted Devices 1.Digital Camera: SONY RX100 series, Canon G series, Panosonic DMC-LX10 2.Smartphone: iPhone series and Android phone. 3.Action Camera: GoPro Hero series, SONY RX0 , SONY X3000, YI CAM, SJCAM Batter y Capacity 3600 mAh 8 hours 3.
