i» HOTHEADED www.hodedah.com A IMPORTANT NOTE: * This product contains small components, please ensure that they are kept away from small children. » This instruction booklet contains IMPORTANT safety information. Please read and keep for future reference. * Note: you will find extra screws and bolts in hardware pack in case of any missing pieces. « If the glass is chipped or broken, do not attempt to assemble the item.
i» HOTHEADED www.hodedah.com Thank you for purchasing from Hotheaded To learn more about hotheaded and our products visit www.hodedah.com READ BEFORE BEGINNING ASSEMBLY -Read each step carefully. It is very important that each step of instruction is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur. -Make sure all parts are included. Most parts are labeled or stamped on the raw edge.
HOTHEADED www.hodedah.com Step 1 » Put upper glass(1) on clear floor or carpet, aluminum tray side upwards. * Attach screw rod (6) on the big trays, screw rod(7) on small trays. Step 2 / 1: «Insert table stand tube(4) through screw rod(6). please note the correct direct «Insert 4X plastic casing (8) through screw rod(7).
HOTHEADED www.hodedah.com Step 3 * Put one layer glass (3) through screw si « Insert plastic washer (9) through screw rod (6). upwards. [ Tip: | please note the front and back when inserting | plastic washer(9). Step 4 « Insert 4X plastic casing (8) through screw as step) «Put layer glass (3) through screw side upwards.
HOTHEADED www.hodedah.com Step 5 Fix steel washer (B) and nut (A) on screw rod with wrench HARDWARE REQUIRED Step 6 * Put bottom glass(2) through screw rod(6), painting side upwards.
HOTHEADED www.hodedah.com Step 7 « Insert plastic washer (9)and stand foot tube(5) through screw rod(6) in sequence. Tips: : | please note the front and back when inserting | | plastic washer(9). | Step 8 « Insert steel footing(10) and rubber mat (11 ) through screw rod (6). * Fix steel washer (C) and nut (A) on screw rod with wrench (E).
+ HOTHEADED www.hodedah.com Step 8 «Turn over table and place it on the floor. Job Complete In the interest of our environment please dispose of all packaging thoughtfully. WARNING! 1. MAKE SURE ALL SCREWS HAVE BEEN PROPERLY TIGHTENED BEFORE USING TV STAND 2.DO NOT PLACE VERY HOT OR VERY COLD ITEMS ON THE GLASS SURFACE UNLESS ADEQUATELY THICK TABLE MATS ARE USED TO PREVENT SUCH ITEMS FROM COMING INTO DIRECT CONTACT WITH GLASS SURFACE 3.DO NO SIT OR STAND UPON THE GLASS SURFACE 4.