User's Manual

ManualsBrandsHobbi ManualsElectronics2.4GHz Remote Control Transmitter

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation.

TTX240

2.4GHz Radio Control System

Operation Guide

Thank you for making the Tactic 2.4GHz system your

choice for radio control! This system uses modern

2.4GHz Spread Spectrum technology – an innovation

that allows you to use this system without worrying

about interference from other radio systems.

Features

FCC Statement

2.4GHz Spread Spectrum Technology

Lightweight, compact receiver without antenna wire

Neutral return signal loss failsafe built in

Multiple receivers linkable to TX

Steering and throttle trims

Servo reversing

Steering rate adjustment (on some models)

3rd channel switch (on some models)

Battery indicator light (with low battery warning)

AAAA0000

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY

UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S

AUTHORITY TO OPERATE THE EQUIPMENT.

Summary of content (4 pages)

PAGE 1
TTX240 2.4GHz Radio Control System Operation Guide Thank you for making the Tactic 2.4GHz system your choice for radio control! This system uses modern 2.4GHz Spread Spectrum technology – an innovation that allows you to use this system without worrying about interference from other radio systems. Features 2.
PAGE 2
Warranty 1-YEAR LIMITED WARRANTY *U.S.A. and Canada Only Tactic warrants this product to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase. During that period, Tactic will, at its option, repair or replace without service charge any product deemed defective due to those causes. You will be required to provide proof of purchase (invoice or receipt). This warranty does not cover damage caused by abuse, misuse, alteration or accident.
PAGE 3
Installation SERVOS      Because there are a variety of specific applications for servos in R/C modeling, different servos are designed for different applications. For each servo, use a servo horn long enough to accommodate the entire range of movement for that particular control. (3) 3rd Channel (2) Throttle Servo RECEIVER, SWITCH HARNESS AND RECEIVER BATTERY Insert 4-AA alkaline batteries into the receiver battery holder in the direction shown on the battery holder.
PAGE 4
Troubleshooting Problem Range is short Run time is short Tx LED is steady but the servos do not funtion Interference or servos glitching One glitching servo Possible Cause Solution Interference Check frequencies in the area, check Rx installation Low Tx or Rx battery Replace the batteries Crash damage Send the radio to Hobby Services for repair Low Tx or Rx batteries Replace the batteries Binding servos causing excess battery drain Free the binding components in pushrods or moving surfaces, s