User's Manual

ManualsBrandsHM-Funktechnik ManualsElectronics70TX-S

Rhein Tech Laboratories Client: HM-Funktechnik GmbH

360 Herndon Parkway Model: 70TX-S

Suite 1400 FCC ID: PUX-70TX-S

Herndon, VA 20170 Standards: FCC Part 90/IC RSS-119

http://www.rheintech.com

Report Number: 2003075

36 of 49

APPENDIX H: MANUAL

Please see the following pages.

Summary of content (7 pages)

PAGE 1
Rhein Tech Laboratories 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Client: HM-Funktechnik GmbH Model: 70TX-S FCC ID: PUX-70TX-S Standards: FCC Part 90/IC RSS-119 Report Number: 2003075 APPENDIX H: MANUAL Please see the following pages.
PAGE 2
Operation and Instruction Manual for the Radio Module 70TX-S - PUX - 70TX-S
PAGE 3
SAFETY- RF EXPOSURE COMPLIANCE This device has been designed using a low power transmitter. It complies with the Federal Communications Commission (FCC) RF exposure limits for General Population/Uncontrolled exposure environment. In addition, it complies with the following Standards and Guidelines: • • • • • • FCC 96-326 (1996), Guidelines for Evaluating the Environmental Effects of RadioFrequency Radiation.
PAGE 4
1. Purpose and application of the Radio Module 70TX-S: The 70TX-S radio module is a FM-narrow bandwith type radio module. The transmitter allows the use of up to 256 channels within a bandwith of about 5MHz in the range from 421 to 510 MHz. The spacing is 25KHz.
PAGE 5
2. Dimensions and connections to peripheral devices: 805 (20.4) 220 (5.6) 215(5.5) 325 (8.25) 465 (11.75) Funktechnik GmbH, D-66620 Primstal FCC ID PUX - 70TX-S Canada YYY Transmitter 275 (7) 925 (23.5) Frequency range USA 421 – 510 MHz Canada 420 – 430 MHz, 450 - 470 MHz 256 channels, spacing 25KHz Frequency: 433.0625 – 434.775MHz Ser. Nr. 134001 Made in Germany 465 (11.75) 325 (8.25) 1025 (26) 1220 (31) 125 (3.2) 1455 (37) The module high is 400 mil (9.9mm).
PAGE 6
Vdd Mod. SB GRD D7 . . D0 Supply Voltage 3.5-10V DC Modulation Input Standby Pin: Standby if open Transmitting if grounded Ground MSB of frequency control LSB of frequency control D0 to D7 changes the frequency of the transmitter. If the pins D0 to D7 are all open the transmitter works with the lowest programmed frequency. The frequency adjustment is digitally coded. Grounding of D0 rises the frequency about the channel spacing 25KHz. D1 rises about double D0, D2 rises about double D1 and so on.
PAGE 7
3. Technical data: Supply Voltage 3.5V to 10 V DC Absolut maximum rating 12 V DC Supply current 31 mA (± 3mA) Modulation input level 1.65 V DC + 1.65 V sinωt for ± 2.5KHz frequency deviation Modulation frequency 0 - 5 KHz Input impedance > 4.7 KΩ RF – output power 10 dBm ± 2 dB Frequency accuracy ± 1.5 KHz Temperature stability ± 5 KHz from -20°C to +70°C conducted 4.