User's Manual

User Manual for the Radio Module 70RX-S1
SAFETY- RF EXPOSURE COMPLIANCE
This device has been designed to use as a low power transmitter. It complies with the Federal
Communications Commission (FCC) RF exposure limits for General Population / Uncontrolled
exposure environment. In addition, it complies with the following Standards and Guidelines:
• FCC 96-326 (1996), Guidelines for Evaluating the Environmental Effects of Radio-
Frequency Radiation.
• FCC OET Bulletin 65 Edition 01-01 (2001) Supplement C, Evaluating Compliance with
FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.
• ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human
Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
• ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement of
Potentially Hazardous Electromagnetic Fields - RF and Microwave.
• Use ONLY the supplied antenna and accessories. Unauthorized accessories may
violate the FCC rules and regulations.
Label Requirement:
• A label should be affixed to the outside of the end product into which the authorized
module/product is incorporated, with a statement similar to the following: “This device
contains RX FCC ID: PUX 70RX-S1”
1. Purpose and application of the radio module 70RX-S1
The 70RX-S1 radio receiver is a FM-narrow bandwith type radio module. It`s a multi channel,
synthesizer controlled device in the range from 420 – 510 MHz, in 12.5 or 25 KHz spacing.
The modules are supplied by HM-Funktechnik GmbH as an OEM product and are to be
installed in customer designed peripherals, such as
• radio remote control devices for machinery in industrial sites
• burglar alarm system, data in general and voice, only in alarm conditions
• data transmission in telemetry systems
• data transmission in wireless hand held terminal systems
• wireless data transmission in general