BT-3002 BT V1.2 USB Module BT-3002 User’s Manual 華朗科技股份有限公司 HL-Tech Corporation BT-3002 BT V1.
BT-3002 BT V1.2 USB Module BT-3002 User’s Manual 華朗科技股份有限公司 HL-Tech Corporation Table of Contents…………………………………………………2 Introduction…………………………………………………………………………………..3 1. Configuration and devices………………………………………………………………………….. 3 4 2. Device properties………………………………………………………………………………………. 4 3. Options…………………………………………………………………………………………………….. 4 4. Discovery………………………………………………………………………………………………….. 5 5. Adding a COM port……………………………………………………………………………………… 5 6. Hardware…………………………………………………………………………………………………..
BT-3002 BT V1.2 USB Module BT-3002 User’s Manual 華朗科技股份有限公司 HL-Tech Corporation Introduction This article describes how to install and configure a Bluetooth device in Microsoft Windows XP Service Pack 2 (SP2). Note If you install a Bluetooth adapter that is not supported in Windows XP SP2, follow the recommendations that the Bluetooth adapter's manufacturer provides.
BT-3002 BT V1.2 USB Module BT-3002 User’s Manual 華朗科技股份有限公司 HL-Tech Corporation 2. Device properties When you view the properties of a Bluetooth device, you see the following information: • The device type • The hardware address of the Bluetooth adapter • The date and time of the last connection • Information about whether a passkey is used for pairing with the device You can also change the name that Windows uses for the device.
BT-3002 BT V1.2 USB Module BT-3002 User’s Manual 華朗科技股份有限公司 HL-Tech Corporation 5. Adding a COM port You can add an incoming port that receives a connection from a Bluetooth device, or you can add an outgoing port that makes a connection to a Bluetooth device. To connect to a Bluetooth device using a COM port, follow these steps: 1. Use the port configuration options in Device Manager to set the COM port configuration.
BT-3002 BT V1.2 USB Module BT-3002 User’s Manual 華朗科技股份有限公司 HL-Tech Corporation 7. Adding a device When you add a Bluetooth device to your computer, address information is exchanged. Sometimes, access keys are also exchanged. This process is known as pairing or bonding the two devices. When you add a device, one of the devices must be discoverable. Some devices let you turn discovery on and off, and others are always discoverable. For example, some mouse devices are always discoverable.
BT-3002 BT V1.2 USB Module BT-3002 User’s Manual 華朗科技股份有限公司 HL-Tech Corporation 8. Joining a Personal Area Network Personal Area Networking (PAN) provides ad hoc networking between Bluetooth devices. All devices that you want to network must support PAN to create a PAN network. To join a PAN network, you can use any one of the following methods: • • • Click the Join a Personal Area Network Double-click the Click option in the Bluetooth taskbar icon menu.
BT-3002 BT V1.2 USB Module BT-3002 User’s Manual 華朗科技股份有限公司 HL-Tech Corporation 9. Adding a modem In Windows XP SP2, you can add a Bluetooth device that has support for dial-up networking as a modem. To do this, follow these steps: 1. 2. Click On the The 3. Start, click Modems Run, type tab, click Select Bluetooth Device telephon.cpl, and then click OK. Add. dialog box opens. Click to select a Bluetooth device to use as a modem.
BT-3002 BT V1.2 USB Module BT-3002 User’s Manual 華朗科技股份有限公司 HL-Tech Corporation 11. File Sending and Receiving You can transfer one file at a time between your computer and another Bluetooth device by using the Bluetooth File Transfer Wizard. For example, you can transfer files between your computer and a mobile phone or a PDA. You can also transfer files between two computers that use Bluetooth. Sending a file To send a file to another computer, follow these steps: 1.
BT-3002 BT V1.2 USB Module BT-3002 User’s Manual 華朗科技股份有限公司 HL-Tech Corporation Federal Communications Commission (FCC) Requirements This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
