User's Manual

HT-DW1
0440010170N0(1A)
Hitron's HT-DW1 is a micro door / window sensor,
uses a magnetic reed switch to detect when a
door, window, cabinet, garage door or any other
object is opened.
Quick Install Guide / Manual
1. Activate Battery
Slide open the sensor’s housing and
pull the tab to activate it for pairing.
2. Join the Network
Follow the instructions on your iControl
touchscreen to add a new HT-DW1.
During the joining needs to be lower
case, the LED on the HT-DW1 will blink
while it’s searching for the network.
More information about this process can be
found at: http://www.hitron-americas.com
Unobtrusive Compact Design
3+ Year Coin Cell Battery Life
Easy Installation with Tape or
Screws
Tamper Switch for Extra Security
100m Free Field, 60m+ Inside
Range
Key Features
Contents
HT-DW1
1 CR-2032 Battery
Screws and Tape (4 each)
LED Indicators/ Troubleshooting
Status/Action
Description
The LED will light green) for 2 seconds when the
battery is inserted.
(
The LED will flash (green) 3 times each time. It will
quit flashing when it finds a network.
Holding the tamper switch, inserting the battery,
and releasing it while the LED is green (within 2
seconds of inserting the battery).
Pressing and releasing the tamper switch 5 times
within 5 seconds.
Start using your HT-DW1
HT-DW1 is ON
Search for network
Factory reset
Forced rejoin
Battery
LED
Sensor’s
housing
Tab
Tamper
switch
Magnet