User's Manual

ManualsBrandsHiTi Digital ManualsElectronicsWIRELESS FOTO TRANSMITTER

General Information

= Copyrights =

change without notice. HiTi Digital Inc. makes no warranty with regard to the

material, including, but not limited to, the implied warranties of merchantability and

fitness for a particular purpose. HiTi Digital Inc. will not liable for errors contained

herein or for incidental or consequential damages in connection with the furnishing,

performance, or use of the material.

= Safety Precautions =

1. Never attempt to disassemble or modify the transmitter. Doing so may lead to

electric shock or malfunction.

2. Do not allow liquids near the transmitter, which may lead to electric shock or fire.

3. Do not use the transmitter if the transmitter body is damaged.

4. Do not mix rechargeable and alkaline batteries. This can cause leakage or rupture,

resulting in personal injury or property damage.

= Federal Communications Commission (FCC) Statement=

You are cautioned that changes or modifications not expressly approved by

the part responsible for compliance could void the user’s authority to operate

the equipment.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of

the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

Summary of content (27 pages)

PAGE 1
General Information = Copyrights = All rights reserved. The information contained in this user’s manual is subject to change without notice. HiTi Digital Inc. makes no warranty with regard to the material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HiTi Digital Inc. will not liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of the material.
PAGE 2
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device.
PAGE 3
= Trademarks = Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corporation. Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated. Mac, Macintosh, and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Pentium is a U.S. trademark of Intel Corporation. All other trademarks or registered trademarks are properties of their respective companies.
PAGE 4
1. Checking package contents HiTi Wireless Foto Transmitter WFT510 WFT510 Carry Bag USB Cable User Manual WFT PC Kit CD Warranty Card Hook Note: 1. If something missed from the package, please contact your local dealer or HiTi service center nearest to you. 2. Batteries are EXCLUDE.
PAGE 5
2. Getting the latest update HiTi Digital Inc. website provides the latest driver, application, user’s manual, printer firmware, and so on for users to download. Please visit our website at www.hiti.com for more information. Any questions toward HiTi product(s), please contact your local service center for detail.
PAGE 6
3. Introduction of WFT510 3-1. WFT510 Parts Antenna Power Switch Switch Button Status LED PC/Printer USB Slot Camera USB Slot 3-2.
PAGE 7
4. Making WFT510 Ready to Work -Inserting Batteries z Pushing up the battery chamber cover of WFT510 z Inserting 4 rechargeable (Recommend) or alkaline AA batteries. WARNING: DO NOT MIX rechargeable and alkaline batteries. This can cause leakage or rupture, resulting in personal injury or property damage.
PAGE 8
Battery Life: In order to maximize WFT510 performance, HiTi strongly recommend using rechargeable battery. The following measurement s are performed at a temperature 20℃ (68℉) and humidity 40%. HiTi WFT510 works with test device. Actual battery life could be varied by different cameras and different batteries. Type of rechargeable battery Consecutively work Standby 2700 Amp 4 hours 7 hours 2500 Amp 3 hours 6 hours 4-2.
PAGE 9
5. How to Transmit Image from WFT 510 to HiTi P510Si Printer 5-1.
PAGE 10
Step 5 Press ( ) button and select SSID WARNING: Tow or above P510Si printers at one place MUST select different SSID.
PAGE 11
Step 10 P510Si will automatically configure with WFT510 Step 11 Wait until “Configuration Done” show up Pull out USB cable from WFT510 and P510Si WFT510 is ready to work with P510Si 5-2.
PAGE 12
Step 4 Camera will switch to PictBridge Mode** Choose images and transmit them to WFT510 ** This procedure could be varied by camera. For example, Nikon D200/Canon S3 can switch to PictBridge Mode at Shooting mode. Canon 40D MUST be at Playback mode and then can switch to PictBridge Mode. Please check camera user manual “PictBridge Mode” part.
PAGE 13
6. How to Transmit Image from WFT 510 to PC via WFT510 6-1. Installing WFT PC Kit Step 1 Insert the CD into CD/DVD ROM, and then the computer will automatically star the installation.
PAGE 14
Step 5 Click [Next] to start installation procedure Step 6 Wait the installation process complete Step 7 Select [Setup WFT Driver] (default) and click [Finish] Complete WFT PC Kit installation 14
PAGE 15
6-2. building up a network setting for WFT510 via WFT PC Kit\ Step 1 Double click WFT PC Kit icon on the desktop The first page of WFT PC Kit will show up Icon Item Description Import Import profile from other device Export Export selected profile to device Edit Edit profile Delete Delete profile Upgrade Upgrade profile sequence on the list Downgrade Downgrade profile sequence on the list Test Test WFT510 network setting 15
PAGE 16
Step 2 Click [Create a new profile] Select wireless structure: Infrastructure or Ad-hoc Infrastructure: An infrastructure configuration is a WLAN and wired LAN communication to each other through an access point. Ad-hoc: An Ad-hoc configuration is a group of wireless devices communication directly to each other (peer-to-peer) without the use of an access point. 。Infrastructure Step 1.a Select [Auto] (recommend) Choose an access point you want to connect and Click [Next] Step 1.
PAGE 17
Step 2 Select Security method: [None], [WEP] Enter password and confirm password Click [Next] Open System Shared Key None ASCII Type 5 ASCII character or, 13 ASCII character for example”Abe2Q” HEX Type 10 Hexadecimal digits or 26 Hexadecimal digits, for example “abc1234567…” Do not need password Step 3.a Select [HiTi File Server] (recommend) Click “ ”, you can select or create a receiving folder Click [Complete] Step 3.
PAGE 18
Step 4 Check Network setting Click [Save] to reserve this profile Step 5 Turn on WFT510 Use USB cable to connect PC and WFT510 Step 6 Select the profile you just created and click 。Ad-hoc Step 1 WFT PC Kit will automatically assign one set of SSID Or you can create your own SSID set Click [Next] IMPORTANT: Please write down Subnet Mask and Default Gateway WARNING: If you are not familiar with WLAN network setting , HiTi do not recommend you create your own SSID and IP address.
PAGE 19
Step 2 Select Security method: [None], [WEP] Enter password and confirm Click [Next] Step 3.a Select [HiTi File Server] (recommend) Click “ ”, you can select or create a receiving folder Click [Complete] IMPORTANT: Please Write down Server IP Step 3.
PAGE 20
Step 5 Turn on WFT510 Use USB cable to connect PC and WFT510 Step 6 Select the profile you just created and click 6-3.
PAGE 21
Step3 Click [Network Communication] Step 4 Select [Wireless Network Connection] and click right bottom of mouse Select [Properties] Step 5 Select [Internet Protocol (TCP/IP)] and click [Properties] Step 6 Select [Use the following IP address] Enter the IP address, Subnet Mask, and Default Gateway that you write down on page 16 and 17 Click [OK] 21
PAGE 22
Step 7 Return to Step 4, select [Wireless Network Connection] and click right bottom of mouse.
PAGE 23
Step 3 Click [Manage network connections] Step 4 Select [Wireless Network Connection] and click right bottom of mouse Click [Properties] Step 5 Select [Internet Protocol Version 4 (TCP/IPv4)] and click right bottom of mouse Click [Properties] Step 6 Select [Use the following IP address] Enter the IP address, Subnet Mask, and Default Gateway that you write down on page 14 Click [OK] 23
PAGE 24
Step 7 Return to the Step 3 and click [Connect to a network] Step 8 Choose the SSID that you created and press [Connect] Important: If you reboot WFT510, Please repeat step 7 and 8 6-4.
PAGE 25
Step 3 Click “switch” button on WFT510 Step 4 Camera will switch to PictBridge Mode** Choose images and transmit them to PC ** This procedure could be varied by camera. For example, Nikon D200/Canon S3 can switch to PictBridge Mode at play mode. Canon 40D MUST be at Preview mode and then can switch to PictBridge Mode. Please check camera user manual “PictBridge Mode” part.
PAGE 26
6-5. Test network setting If you cannot connect WFT510 and PC/P510Si, WFT PC Kit provides [Test function] to help you test network setting and show the result. Step 1 Turn on WFT510 Use USB cable to connect PC and WFT510 Step 2 Click [ ] to test WFT510 network setting Step3 Wait around 10 seconds, test result will show up.
PAGE 27
7. Specification Please notice that specification of WFT 510 is subject to change without notice. Item Description Wireless Standards IEEE 802.11b, IEEE 802.11g Communications IEEE 802.11b: DQPSK, DBPSK Protocols IEEE 802.11g: OFDM Operation frequency 2412-2472 MHz Antenna Gain 2 dBi Range* Approximately 100m Data rates** 11b : 11Mbps/5.