Instruction Manual

ManualsBrandsHitech Industrial ManualsElectronicsWirless Charging Clock

Instruction Manual

Product Parameters:

Power supply: DC 5V---2A, AC100-240V 50/60HZ

In order to ensure the charging speed and the stability of product function, the product

needs to use USB cable with 2A electric current+ DC5V/2A power adapter

Power: 5W

Charging distance: 2-10mm (the closer distance between the mobile phone and the

product, the faster charging)

Charging time: about one hour more compare with plug-in charging.

Usage : When the clock is plugged in, put the phone on the top of the clock, the phone

can be charged.

Functions:

1. Display mode:

There are two display modes, press the button “SET”, you could change the mode of

display;

Dp-1: time, temperature and year, month and day display would change

orderly(Carousel mode)

Dp-2: only time, temperature display (Fixed mode)

2. Voice Mode Mode (power-saving mode):

Press the button “DOWN”, on: Sd”←→”--:Sd”;

“on:Sd” means sound control in on;

“--:SD” means sound control is off.

It will automatically close the voice mode in seconds; Display will be woke up when

the sound is louder than 60 decibels or flapping the clock. If close the voice control

mode, constant light function will be opened.

3. Temperature Mode Setting:

Press the button of “UP”, you could change the Temperature Mode between °C and °F

4. Brightness Setting:

Press the button of “UP” for 3 seconds, you could enter into the mode of brightness,

then you could change the brightness through pressing the button of “UP”(more bright)

and pressing the button of “DOWN”(less bright).

L1: Bright

L2: Less Bright

L3: Weakest brightness

Summary of content (7 pages)

PAGE 1
Instruction Manual Product Parameters: Power supply: DC 5V---2A, AC100-240V 50/60HZ In order to ensure the charging speed and the stability of product function, the product needs to use USB cable with 2A electric current+ DC5V/2A power adapter Power: 5W Charging distance: 2-10mm (the closer distance between the mobile phone and the product, the faster charging) Charging time: about one hour more compare with plug-in charging.
PAGE 2
5. Power supply: to use2A USB cable supply power directly or + DC5V/2A power adapter It must use plugged-in power supply when charging the phone. (The clock with built-in cell battery, it will automatically remember the time when the power is off, we don’t need to reset the time); 6.
PAGE 3
12H PM Turn on voice control      Turn off Alarm Turn off voice control Turn on Alarm 1 Turn on workday alarm Turn off Alarm 3 Turn off workday alarm SET UP DOWN RESET DC5V Tips:  When the function is abnormal or the display is abnormal (such as nothing happened in the screen when the power is plugged in or the battery is installed), press the RESET button on the back of the product, reactivate.
PAGE 4
following below steps: Step 1: The receptor is plugged into the charging port.
PAGE 5
Step 2: Fixed the receptor on the back of the phone.
PAGE 6
Part 4: Put the phone on the top of clock (the receptor is aligned with the clock transmitter), the phone is charging.
PAGE 7
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.