User's Manual

ManualsBrandsHitec RCD ManualsElectronicsR/C Transmitter

Introduction

Thank you for purchasing the Hitec Laser digital proportional radio control system. The Laser is

loaded with features, easy to use and utilizes the latest in solid-state components for unsurpassed

reliability and performance. It is important that you read and understand this manual before you

attempt to operate your system.

Table of Contents

Introduction/ Table of contents………………………………………………..

System Specifications………………………………………………………....

1. Transmitter

a. Features…………………………………………………………...

b. Layout………………………………………………………….…

c. Specifications…………………………………………………......

d. Servo Reversing……………………………………………...…....

e. Servo A.T.V. (Adjustable Travel Volume).………………….…..

f. Mixing……………………………………………………………..

g. Control Stick adjustment…………………………………………..

h. Gimble tension adjustment……………………………………..….

i. Trim levers……………………………………………………..….

j. Dual Rates…………………………………………………………

k. Landing Gear Switch………………………………………………

l. CH. 3 Throttle E.P.A. (End Point Adjustment…………………….

2. Receiver

a. Features…………………………………………………………….

b. Layout……………………………………………………………..

c. Specifications……………………………………………………....

d. Installation………………………………………………………….

3. Servo

a. Features……………………………………………………………..

b. Layout…………………………………………………………...…

c. Specifications………………………………………………………

d. Installation……………………………………………………….…

4. Charging Specifications

a. Transmitter and Receiver battery…………………………………

5. Operation

a. Trainer system………………………………………………..…….

b. Range checking……………………………………………………

6. Replacement Parts & Accessories………………………………………..

7. Product Service Information……………………………………………

8. Precautions…………………………………………………………………

9. Final thoughts………………………………………………………………

Summary of content (8 pages)

PAGE 1
Introduction Thank you for purchasing the Hitec Laser digital proportional radio control system. The Laser is loaded with features, easy to use and utilizes the latest in solid-state components for unsurpassed reliability and performance. It is important that you read and understand this manual before you attempt to operate your system. Table of Contents Introduction/ Table of contents……………………………………………….. System Specifications……………………………………………………….... 1. Transmitter a. Features…………………………………………………………... b.
PAGE 2
System Specifications 1. Transmitter A. Features • Ergonomically designed 4 or 6 channel FM transmitter. • High quality precision gimbals with adjustable stick length and tension. • Servo reversing on all channels. • ATV (Adjustable Travel Volume) CH 1 and CH 2. • V-tail and Elevon mixing. • Trainer system. (Hitec/Futaba compatible) • Premium 9.6v 600mah Nicad rechargeable battery pack. • Neck strap attachment. • Carrying handle. • Easy to read LED battery indicators.
PAGE 3
F. Mixing • The Laser series transmitters are equipped with a switch that will mix ch.2 & ch.4 for V-tail vehicle or ch.1 and ch.2 for Elevon. (Show illustration of the switch and the nice illustration used in the Eclipse manual on pages 25 for v-tail and pg. 24 elevon function) G. Control Stick Adjustment • The length of the non-slip control sticks can be adjusted to suit the requirements of the user. (Show Illustration of stick like on pg. 6 of the Eclipse manual) H.
PAGE 4
I. Trim Levers • The trim levers associated with each control stick are used to correct or (trim-out) the tracking of the vehicle. • (Caution) Make sure the trims will move the surface past neutral when moved to their extremes. This will assure you have adequate trim control. • After your vehicles first test run, note the positions of the control surfaces that required trim. Next, center the trims and turn the receiver off.
PAGE 5
2. Receiver Most Laser systems will be sold with the Hitec Supreme 8 channel dual conversion receiver, these are the specifications of the Supreme receiver. A. Features • Dual conversion • Narrow Band • Crystal Interchangeable B.
PAGE 6
3. Servos Your Laser 4 system will contain the HS-300 standard servo while the Laser 6 systems will have the HS-422 servo. A. Features • Indirect drive • Custom IC • SMT (Surface Mount Technology) construction • Precision gear train B. Layout • (Show illustration) • Black wire: Negative • Red wire: Positive • Yellow wire: Signal C. Specifications: • Control system: + Pulse width control (1550uS/N) • Operation angle: 45 degree (one side) 90 degree total throw • Power Supply: 4.8V – 6.
PAGE 7
4. Charging Specifications A. Transmitter/Receiver battery • The initial charge on your system should be at least 24 hours to insure a full charge. • Subsequent charges should be at least 12 - 20 hour. • It is best to put your system (TX and RX) on charge the night before you plan to use it.
PAGE 8
6. Replacement Parts & Accessories The following is a listing of replacement parts and accessories available for the Laser radio series from your hobby dealer. • • • • • • • • TX Battery (#58207) RX Battery 600mah (#57401) Overnight Charger (#43025) Neck strap (#58311) Trainer cord (#58310) Switch harness (#57215S) Stick extensions (#56381) Flight Preserver (#58480) 7.