TD61-2472A WirelessIP 5000 User's Manual (v2.0.0) Hitachi Cable, Ltd.
User's Manual 1. NAMES & FUNCTIONS OF DEVICE PARTS ..............................................................................1 1.1. DISPLAYED ICONS ..............................................................................................................................1 1.2. NUMBER PAD INPUT TABLE ...............................................................................................................3 1.2.1 Text input mode ..................................................................
User's Manual 2.9.7.5 Caller ID......................................................................................................................................63 2.9.7.6 User Data Reset...........................................................................................................................64 2.9.8 Courtesy mode On/Off...................................................................................................................64 2.9.9 KeyLock/ KeyUnlock .........................
User's Manual 1. Names & Functions of Device Parts Figure 1 shows side and front diagrams of the WirelessIP5000. Figure 1 1.1. Displayed icons Shows the reception signal strength. The more lines, the better the signal. Out of service area shows that the location is outside the service area or is an environment where the signals do not reach. Shows that the phone is On in silent mode. This is displayed when the ringer is set to silent. Shows that vibration mode is On.
User's Manual Table 11 No. Key 1 Names and functions Headphone jack 2 VolUp Volume Up: Increases the headphone/earpiece/ringer volume. 3 VolDn Volume Down: Decreases the headphone/earpiece/ringer volume. 4 Lock Key lock 5 LeftSoft LeftSoft key 6 RightSoft RightSoft key Multi-function key: Enter/Up/Down/Left/Right 7 8 Clear Standby Time : Received Calls Standby Time : Outgoing Calls Clear Text editing: Backspace Text editing: Press and hold down to erase all the characters.
User's Manual 1.2. Number pad input table IP address input mode Text input mode Key Character assignments Key Character assignments 1 1 1 1 / , 2 2 2 2 a b c 2 A B C 3 3 3 3 d e f 3 D E F 4 4 4 4 g h i 4 G H I 5 5 5 5 j k l 5 J K L 6 6 6 6 m n o 6 M N O 7 7 7 7 p q r s 7 P Q R S 8 8 8 8 t u v 8 T U V 9 9 9 9 w x y z 9 W X Y Z * . (dot) * . * ! ? [ ] ^ _ `{ | } ~ 0 0 0 0 @ space - # : # ; $ % & ‘ ( ) + < = > # 1.2.
User's Manual 2 The type of symbol can be selected using the dial pad by selecting Code. Select Code on the dial pad. Define the Code by pressing the 3 key. When hiragana syllabic letters are selected, after input you can convert to kanji ideograms with the keys. Press the Hitachi Cable key to confirm the character.
User's Manual 4 To delete the input character, press the Clear key.
User's Manual 2. Application 2.1. Power ON Switching on the power for the phone 1 With the power Off, if you hold down the End key for at least 1 second, a screen like that in the figure on the right is displayed and the power comes On. *The messages "Waiting…", "Loading…", and "Running…" are displayed in order. 2.2.
User's Manual 2.3. Call Inputting the telephone number and making a call 1 If a set telephone number is displayed on the screen, you can receive a call. Note! If the telephone number is not set correctly, "NotRegister" or "Network Fail" is displayed. 2 Input the telephone number, then press the Send key. If you succeed in placing the call, you can hear the ringtone at the other end.
User's Manual 2 When a call comes in, the other party's telephone number is displayed on the screen. If their name is registered in the contacts list, their name is displayed above the telephone number. You can answer the incoming call by pressing the Send key. * During call reception, "Receiving" is displayed on the screen. * Pressing the End key during an incoming call ends that call.
User's Manual 2.5.1 New registration 2.5.1.1 Registration from a telephone number Inputting a telephone number to register it into the contact list 1 Input the telephone number, then press the LeftSoft key to select the submenu and select "2. Save". 2 Please enter your information. Input the necessary information (name, kana syllabic letters for name pronunciation, telephone number, group, speed to save this information. dialing number), then press 2.5.1.
User's Manual 2 Please enter your information. Input the necessary information (name, kana syllabic letters for name pronunciation, telephone number, group, speed dialing number), then press to save this information. If you press the key without inputting a telephone number, the message in the figure on the right is displayed.
User's Manual 2.5.1.3 Registration from search results Registering details into the contact list from search results 1 Displaying the search results. (See the section on searches.) Select the number you want to register, press the LeftSoft key to select the sub-menu, and select "1. Add".
User's Manual 2 Input the information. Input the necessary information (name, kana syllabic letters for name pronunciation, telephone number, group, speed dialing number), then press to save this information. 2.5.1.4 Registration from a call log Registering details into the contact list from the call log. 1 Displays the call logs. (See the section on the call log.) Select the number you want to register, press the LeftSoft key to select the sub-menu, and select "1. Save". 2 Input the information.
User's Manual 2.5.1.5 Registration from IM Registering details into the contact list from the IM Inbox, drafts, or Outbox. 1 Display the IM menu. (See the section on IM.) Select "1. Inbox". Select "1. Text Message". If there is a message, this will display as the diagram on the right. After selecting the message to register from, press the LeftSoft key to select the sub-menu, then select "3. Save". 2 Input the information.
User's Manual 2.5.1.6 Registration from presence Registering details into the contact list from the presence user list or block list. 1 Displays the presence menu. (See the section on presence.) Select "1. User list" or "3. Block list". If this has already been registered, this will display as follows. After selecting the user you wish to register, press the LeftSoft key to select the sub-menu, then select "3. Save". 2 Input the information.
User's Manual 2.5.2 Call from contact list Making a call from the contact list. 1 From the contact list menu, select "1. Search". 2 There are the following five methods for finding a telephone number. (1) Pronunciation (2) By name (3) By telephone number (4) By group ( 5) Abbreviated Numbers The search results are displayed as in the figure on the right. Note! You can search without inputting the entire search text. Example: Suppose that the names "Ogawa" and "Ootani" are registered.
User's Manual 2.5.3 Group revision Adding and deleting group names. 1 2 From the contact list menu, select "3 Revise group". The“1.Default” is that groups can not be revised or erased. You can create up to 10 groups. To add a group, press the LeftSoft key to select the sub-menu, then select "1. Add". 3 The figure on the right shows the addition of a group named "WIP". To save the newly added group and return to the contact list menu, press the key.
User's Manual 4 To delete a group, select the group to delete, press the LeftSoft key to select the sub-menu, then select "3. Delete". * After the deletion completion message is displayed, the display returns to the contact list menu. 5 To change a group (name), select the group to change, then press the key. Edit according to Step 3. After this, when you press the key and save the new group name, the display returns to the contact list menu.
User's Manual 2.5.4 Erase one item from contact list Deleting one data item from the contact list. 1 From the contact list menu, select "1. Search". 2 Search for the telephone number you want to delete. (See the section on calling from the contact list.) Select the telephone number to delete, then press the LeftSoft key to select the sub-menu, then select "3. Delete".
User's Manual 3 A confirmation message is displayed. With the "Yes" or "No". keys select either If you select "Yes", the "Deletion complete" message is displayed immediately, then the display returns to the contact list menu. 2.5.5 Erase all Deleting all the data in the contact list. 1 From the contact list menu, select "4. Delete all". 2 A confirmation message is displayed. With the "Yes" or "No".
User's Manual 3 If you select "Yes", the process for deleting the entire contact list starts. The "Deletion complete" message is displayed immediately, then the display returns to the contact list menu. 2.6. IM Displays the mail menu. 1 Press the LeftSoft key to select the menu item. Select "2. IM". * With some connection equipment, this is not possible.
User's Manual 2.6.1 Inbox Displays, edits, and deletes received messages. 1 From the IM menu, select "1. Inbox". If there is an unread message, a screen is displayed showing the number of unread messages. 2 After this screen goes out, when you select “1. Text Msg.” a list of the unread messages is displayed. If you do not press the Enter key, the selected message automatically scrolls horizontally to display the entire message.
User's Manual 4 To reply to a received message, select that message, press the LeftSoft key to select the sub-menu, then select "1. Reply". Input the message with the number keys and the LeftSoft key. Input the telephone number to send to. By pressing the key, a confirmation screen like that in the figure on the right is displayed.
User's Manual 5 To forward a received message, select that message, press the LeftSoft key to select the sub-menu, then select "2. Forward". Input the message with the number keys and the LeftSoft key. Input the telephone number to send to. By pressing the key, a confirmation screen like that in the figure on the right is displayed.
User's Manual 6 To delete a message, select the message to delete, press the LeftSoft key to select the sub-menu, then select "4. Delete". The screen in the figure on the right (3rd line) is displayed. Select whether or not to delete with the to finalize the deletion.
User's Manual 7 To delete all the messages in the Inbox, press the LeftSoft key to select the sub-menu, then select "5. Delete All".
User's Manual 2.6.2 New Message Writing and sending a new message. 1 From the IM menu, select "2. New Message". 2 Input the message with the number keys and the LeftSoft key. Input the telephone number to send to.
User's Manual 3 The message is sent with the RightSoft key in the message input column. A screen similar to that on the right will be displayed, please select “Yes”. The processing during sending is displayed as in the figure on the right. A “Send Completed” message screen immediately displays.
User's Manual 2.6.3 Drafts An unsent message is stored temporarily. 1 From the IM menu, select "3. Draft". 2 If you are not sending the message right away, to save it for later use, press the End key. To save the message, select "Yes" with the key. 3 keys, then press the If you do not press the key, the selected message is automatically scrolled horizontally to display the entire message. Alternatively, you can use the keys to select the next message up or down.
User's Manual 4 If you press the key with the message selected in Step 3, a screen like that in the figure on the right is displayed. If you do nothing with the display screen, the message is automatically scrolled vertically. You can also use the or key to check a message manually. * The screen contents include the date, telephone number, and message contents. 5 To edit a "draft" message, select that message, press the LeftSoft key to select the sub-menu, then select "1. Edit".
User's Manual 6 To delete a "draft", press the LeftSoft key to select the sub-menu, then select "2. Delete". The screen in the figure on the right (3rd line) is displayed. Select whether or not to delete with the to finalize the deletion.
User's Manual 7 To delete a "draft", press the LeftSoft key to select the sub-menu, then select "3. Delete All". The screen in the figure on the right (3rd line) is displayed. Select whether or not to delete with the to finalize the deletion.
User's Manual 2.6.4 Outbox Displaying, editing, deleting, and re-sending of sent messages 1 From the IM menu, select "4. Send Box". 2 Alternatively, you can use the keys to select the next message up or down. The selected message is automatically scrolled horizontally to display the entire message. To check a message manually, use the 3 When you select the message and press the figure on the right is displayed. You can also use the or keys.
User's Manual 4 To edit a send message, select that message, press the LeftSoft key to select the sub-menu, then select "1. Edit". The screen becomes as in the figure on the right, so with the move to the input column you want to edit and edit it.
User's Manual 5 To delete a send message, select that message, press the LeftSoft key to select the sub-menu, then select "2. Delete". The screen in the figure on the right (3rd line) is displayed. Select whether or not to delete with the to finalize the deletion.
User's Manual 6 To delete a send message, select that message, press the LeftSoft key to select the sub-menu, then select "3. Delete All". The screen in the figure on the right (3rd line) is displayed. Select whether or not to delete with the finalize the deletion.
User's Manual 2.6.5 Setting Configure Ringtone Mode 1 From the IM menu, select "5. Settings". 2 Displays configuration information. Configuration Information: Displays ringtone mode.
User's Manual 2.7. Call log Displays the outgoing call log and the incoming call log. 1 Press the LeftSoft key and select the menu item. A screen like that in the figure on the right is displayed. Either press the "3" on the number pad or select "3. Call logs", then press the key. * When on standby, you can also display the incoming call log with the key and the outgoing call log with the key. 2 The call log menu has the "Incoming call log", "Outgoing call log", and "Delete all data" items.
User's Manual 3 Select "2.Outgoing call log". The name or telephone number called is displayed in the same way as for the incoming call log. * The date and time the call was made are displayed above the name/telephone number. Outgoing call log 2.7.1 Details Displays detailed call log information. 1 When you press the key on the name/telephone number that you want more detailed information about, a pop-up window like that on the right is displayed.
User's Manual 2 The screen in the figure on the right is displayed. Select whether or not to delete with the to finalize the deletion. 2.7.3 keys, then press the Delete all data Deleting the entire call logs. 1 Select "3.Delete all data".
User's Manual 2 The screen in the figure on the right is displayed. Select whether or not to delete with the to finalize the deletion. 2.7.4 keys, then press the key Calling from the call log Making a call from a call log. 1 With a call log displayed, you can make a call by pressing the Send key with the name/telephone number highlighted. If their name is registered in the contacts list, their name is displayed above the telephone number.
User's Manual 2.8. Presence Displays the presence menu. 1 Press the LeftSoft key to select the menu. * With some connection equipment, this is not possible. A screen like that in the figure on the right (second row) is displayed. Either press the "4" on the number pad or select "4. Presence", then press the key. 2.8.1 User list Displaying a list of registered users. 1 To look at a list of registered users, either press the "1" on the number pad or select "1.User list", then press the key.
User's Manual 3 To register a user, select the number to register, press the LeftSoft key to select the sub-menu, and select "1. Register User". Use the number pad and the LeftSoft key to enter the user's telephone number. If you try to input an Alias that is already registered, the "Already Registered" message is displayed and the display returns to the input field.
User's Manual 4 To send a message to a registered user, select the message to send and press the LeftSoft key to select the sub-menu, then select "2. IM Send". 5 To register a registered user to a block list, selecting the message to register, press the LeftSoft key to select the sub-menu, then select "4. Register Block ".
User's Manual 6 To delete a registered user, select the registered user to delete, press the LeftSoft key to select the sub-menu, then select "5. Delete". The screen in the figure on the right (3rd line) is displayed. Select whether or not to delete with the to finalize the deletion.
User's Manual 7 To delete all registered users, press the LeftSoft key to select the sub-menu, then select “6. Delete All”. The screen in the figure on the right (3rd line) is displayed. Select whether or not to delete with the to finalize the deletion. 2.8.2 keys, then press the key Block list Displaying a list of users registered in the block list. Your status is not disclosed to users registered in the block list.
User's Manual 2 A list of the registered users is displayed. 3 To register a block list, select the user to register, press the LeftSoft key to select the sub-menu, then select “1. Block Register”.
User's Manual 4 To send a message to a registered user, select the registered user to send the message to, press the LeftSoft key to select the sub-menu, then select "2. IM Send". 5 To delete a block of registered users, select the registered user to delete, press the LeftSoft key to select the sub-menu, then select "4. Unblock".
User's Manual 6 To delete a registered user, select the registered user to delete, press the LeftSoft key to select the sub-menu, then select "5. Delete". The screen in the figure on the right (3rd line) is displayed. Select whether or not to delete with the to finalize the deletion.
User's Manual 7 To delete all registered users, press the LeftSoft key to select the sub-menu, then select “6. Delete All”. The screen in the figure on the right (3rd line) is displayed. Select whether or not to delete with the to finalize the deletion. 2.8.3 keys, then press the key Status Changing your own status. 1 To look at a status list, either press the "3" on the number pad or select "3. Status", then press the key.
User's Manual 2 You can set the status by using the keys, then pressing the There are seven status modes. : Online : Briefly away from seat : Away from seat : Offline 2.8.4 Setting 1 From the Presence menu, select “4. Settings”. 2 Displays configuration information. H it a c hi C ab le 5 0 /8 4 key.
User's Manual 2.9. Basic settings menu Displays the setting menu. 1 Press the LeftSoft key to select the menu item. A screen like that in the figure on the right (second row) is displayed. Select "5.Setting". 2.9.1 Sound/Vibration Setting the ringer/vibration type. 1 You can switch the ringtone/ mode/ LED for inside lines and outside lines. From the setting menu, select "1. Sounds/ Vibration".
User's Manual 2 You can switch the ringtone/ mode/ LED for inside lines and outside lines. To set the ringer for a call coming in on an outside line, either press the "1" on the number pad or select "1. External 1", then press the key. To set the ringer for a call coming in on an inside line, either press the "3" on the number pad or select "3. Internal 1", then press the key. There are four settings available, two each for inside and outside lines.
User's Manual 2.9.2 Phone Lock 1 From the settings menu, select "2. Phone Lock". 2 Select "1. KeyLock password". * Do the same for the "Admin password". 3 When you select "1. KeyLock password", the system asks you for the current password. Please enter the correct password. 4 When you input the correct password, the system asks you to input the new password.
User's Manual 5 For verification, the system asks you to input the new password a second time. When you input the password, a screen like that on the right is displayed for a few seconds. 6 Select “2. Lock Mode”. Select either “Password” or “No Password” with the 2.9.3 1 Alarm From the settings menu, select "3. Alarm". H it a c hi C ab le 5 4 /8 4 keys.
User's Manual 2 Select either “1. Alarm”, “2. Alarm”, or “3. Alarm”. 3 Displays configuration information. (Settings, Time, Bell, No. of Times) 2.9.4 Volume Adjusting the volume of WirelessIP5000. 1 From the settings menu, select "4. Volume". 2 Displays configuration information. (Ringtone Volume, Headset Volume, Call Volume, Notify Volume) Adjust the volume with the H it a c hi C ab le keys.
User's Manual 2.9.5 Error Lamp 1 From the setting menu, select “5. Error Notify”. 2 Select “1. Service Lamp”. 3 Displays configuration information.
User's Manual 4 Select “2. Error Msg.”. Select “On” or “Off” with the 2.9.6 keys Information display 1 From the setting menu, select "6. Information Display". 2 From the information display menu, select "1. TCP/IP". Network Information displays: Use DHCP, IP address, Netmask, Gateway, DNS1, and DNS2.
User's Manual 3 From the information display menu, select "2. Wireless LAN". Wireless LAN Information displays: Current Network, SSID, Signal (dBm), Channel, WEP status, MAC address, Mode, and Beacon interval. 4 From the information display menu, select "3. SIP". SIP Information displays: URL, User ID, Proxy, Registrar, and Outbound Proxy. 5 From the information display menu, select "4. MAC Address". The MAC address is displayed.
User's Manual 6 From the information display menu, select "5. WEB server". Displays WEB server. 7 From the information display menu, select "6. Version". Displays Software Version and Bootrom. 2.9.7 1 Advanced From the information display menu, select "7. Advanced".
User's Manual 2.9.7.1 Time 1 From the Advanced menu, select "1. Clock". 2 From the Clock menu, select "1. Time Server". Time Server Information displays: NTP, NTP Server 1 and NTP Server 2. 3 From the Clock menu, select "2. Time Offset". Select time with the H it a c hi C ab le keys.
User's Manual 4 From the Clock menu, select "3. Daylight Save". Daylight save, Start date, Start time, End date, End time are displayed. 5 From the Clock menu, select "4. Display Format". Displays Date Format and Time Format. 6 From the Clock menu, select "5. Date and Time Settings". Displays Date and Time.
User's Manual 2.9.7.2 Brightness adjustment 1 From the Advanced menu, select "2. Adjust brightness". 2 Use the keys to adjust the contrast, then finalize with the key. 2.9.7.3 Font size 1 From the Advanced menu, select "3. Font size". 2 Using the H it a c hi C ab le keys to select the font size, then finalize with the 6 2 /8 4 key.
User's Manual 2.9.7.4 Language setting Setting the language (Japanese/English). 1 From the setting menu, select "4. Language". 2 Use the with the keys to select either “Japanese” or “English”, then finalize key. 2.9.7.5 Caller ID 1 From the Advanced menu, select "5. Calling number". 2 Use the keys to select either “Notify” or “Do Not Notify”, then finalize with the key.
User's Manual 2.9.7.6 User Data Reset 1 From the Advanced menu, select "6. User Data Reset". 2 A confirmation message is displayed. Use the “Yes” or “No”. keys to select either Reference: The Admin menu is the menu for the network administrator. For details, refer to the "WirelessIP 5000 Administrator Guide". 2.9.8 Courtesy mode On/Off When courtesy mode is set, the ringer does not ring and all ringers go into vibration mode. 1 Press and hold down the * key on the number pad.
User's Manual 2 Silent mode and vibration mode are switched On. 3 To end courtesy mode, press and hold down the * key on the number pad again.
User's Manual 2.9.9 KeyLock/ KeyUnlock When the keylock is set, button operations are disabled. 1 Press and hold down the Lock key on the side of the phone. Enter the password. Note! The default value for the password is "0000". You can change the password freely. (See the security section.) 2 The keylock comes On.
User's Manual 3 To unlock the keylock, press and hold down the Lock key on the side of the phone again. Enter the password. 2.10. Network 1 Press the LeftSoft key to select the menu. * With some connection equipment, this is not possible. Either press the "6" on the number pad or select "6. Network", then press the key.
User's Manual 2.10.1 Site Scan Information on detected signals can be displayed. 1 Select “1. Site Scan” from the Network menu. 2 A message is displayed during the search. The SSID for access points that where detected during the scan are displayed. To see detailed information, select the SSID and press the key. Note!!!) At most 10 access points can be displayed. 3 To refresh the Site Scan Information, press the LeftSoft key to select the sub-menu, then select "1. Refresh". Site Scan reopens.
User's Manual 2.10.2 1 Select “2. Ping Test” from the Network menu. 2.10.2.1 1 Ping Test Manual Select “1. Manual” from the Ping Test menu. 2 2.10.2.2 1 1st Proxy Select “2. 1st Proxy” from the Ping Test menu.
User's Manual 2 If the 1st Proxy is not configured, the message in the right diagram displays. 3 2.10.2.3 2nd Proxy 1 Select “3. 2nd Proxy” from the Ping Test menu. 2 If the 2nd Proxy is not configured, the message in the right diagram displays.
User's Manual 2.10.2.4 1 Gateway Select “4. Gateway” from the Ping Test menu. 2 2.10.2.5 1 TFTP server Select “5. TFTP Server” from the Ping Test menu.
User's Manual 2.10.3 Network Reload 1 Select “3. Network Reload” from the Network menu. 2 Use the H it a c hi C ab le keys to select either “Reconnect” or “Disconnect”.
User's Manual 3. Various operation methods 3.1. Hold function This is used to put a call on hold. The hold tone is played on the terminal that you have put on hold. 3.1.1 Hold During a call, you can put the other party on hold by pressing the Send key. Example: Putting B on hold While A and B are talking, if A presses the Send key, B is put on hold. Press the Send key.
User's Manual 3.2. Calling method 3.2.1 Internal extension call You can call an internal number by dialing the , then pressing the Send key. Check the inside number with the administrator. Dial the inside number (2222) for B, then press the Send key. Calling A Inside B A number: 1111 number: 2222 Base number: 10 Outside Base number: 20 Outside line line number: number: 05011112222 05011111111 Prefix: 3.2.
User's Manual 3.2.3 184/186 call To temporarily switch caller ID On/Off, dial 184 or 186 before you dial the other party's telephone number. 184 (Do not identify caller): Your telephone number is not identified. 186 (Identify caller): Your telephone number is identified.
User's Manual 3.2.4 Operation methods using call mode You can make prefixed calls and 184/186 calls from the contact list, incoming call log, and outgoing call log. 3.2.4.1 Calling in call mode from the contact list When you select the telephone number from the contact list, press Right soft "Call mode", then on the call mode screen press <1. Prefix 2.184 3.186>, then press the Enter key. The number you have input is displayed with <0> attached and when you press Send, the outside call is made.
User's Manual 3.2.6 Speed dialing You can make a call using its speed dialing number. 1 Input a speed dialing number registered in the contact list. 2 Press the last digit in the speed dialing number and hold it down for at least 1 second. For example, for a speed dialing number of 001, hold down the "1" for at least one second. 3 A call is made to the telephone number corresponding to the speed dialing number input. 3.2.
User's Manual 3 After a short time, a call is made automatically to the telephone number that corresponds to the speed dialing number entered. Note! If call mode is used when inputting the telephone number, the timer between digits does not operate.
User's Manual 4. Accessories 4.1. Accessory guidelines These guidelines concern WirelessIP5000 accessories. When unplugging the power cord for an accessory, hold it by the plug. Never pull the cord itself Keep accessories out of the reach of children. Use only chargers, batteries, and accessories specifically manufactured for the Hitachi Cable WirelessIP5000.Using a charger, battery, or accessory not designed for the WirelessIP5000 would cause danger and would void the warranty for your telephone.
User's Manual 4.4. USB cable (option) If you connect your WirelessIP5000 to a PC with the USB cable shown in Figure 3, you can charge and change settings. When setting the WirelessIP5000, check whether your WirelessIP5000 is directly connected to your PC with the USB cable. Figure 3 4.5. Installing the battery Load the battery into the battery installation section at the rear of the WirelessIP5000, then push in, in the direction of the release button until it clicks into place. 4.6.
User's Manual Figure 5 4.8. Charging without the desktop charger Step 1: Connect the AC adaptor to a wall socket. Step 2: Remove the connector cover from the WirelessIP5000. Step 3: Install the AC adaptor's 24-pin connector to the bottom of the WirelessIP5000. Note: You can also charge with the optional USB cable instead of with the AC adaptor. 4.9.
User's Manual 5. Safety Instructions This safety information applies to the WirelessIP5000 telephone. Please read the section below before installing or using your WirelessIP5000. 5.1. Warning about emergency services Since the WirelessIP5000 utilizes a communications network that is dependent on commercial power supply, during a power failure it can not access emergency services. Use some other means to access emergency services. 5.2.
User's Manual Appendix Specifications Item No. 1 2 Physical dimensions Hardware Specifications Main Unit 44(W)mm×23(D)mm×127(H)mm (Using lithium ion battery) Lithium ion battery 43(W)mm×11(D)mm×68.5(H)mm Small Battery *1 43(W)mm×9(D)mm×68.5(H)mm Desktop charger 64(W)mm×89(D)mm×80(H)mm Display Number of pixels 128×128 8 lines, 10 columns (double-byte characters) Button Dot size 0.18(W)mm×0.22(H)mm Dot pitch 0.19(W)mm×0.23(H)mm Effective range 24.5(W)mm×29.
User's Manual Minimum reception sensitivity -84dBm@11Mbps(Typ.) -88dBm@5.5Mbps(Typ.) -89dBm@2Mbps(Typ.) -93dBm@1Mbps(Typ.) Handover 4 Layer 2 *3 Software Call control protocol SIP (v.2.0.0) Audio encoding G.711 A-Law/μ-Law 64kbps Network settings DHCP (client operation only)/manual G.729A 8kbps NAT(Static), UPnP, STUN Priority control DiffServ DSCP Security SSID WEP key 64/128/256 bits 802.
Copyright© 2005 Hitachi Cable, LTD.
