USER MANUAL FULLY AUTOMATIC WASHING MACHINE Model AJ-S55GZ Thank you for your purchase of Fully Automatic Washing Machine. Please read this manual carefully for proper operation. Please keep this manual for future reference.
CONTENTS Preface ........................................................................................................................... 3 Safety Precaution .................................................................................. 4 Installation Guide .................................................................................................... 7 Installation ....................................................................................................................
Preface The number next to the sign is the page number for detailed description. Air-jet drying It's an economic mode of drying without heating. May be used to dry the heat-irresistible swimsuit or the underwear containing the amino heat-insulation materials. Keep room free of mugginess for causing no temperature rise. Control the black mildew. The drying capacity can be as high as 1.5kg. 1.5kg The duration is irrelevant to the dryness level for applying the preset mode of drying.
Safety Precautions Please read this part of substance carefully for proper operation before using your machine. The precautions stated here are classified as "Warning" and "Attention" according to the damage and the emergency caused by misoperation, and are described respectively in line with the marks below Warning With no respect to this mark, the misoperation may cause death or GBH. Attention With no respect to this mark, the misoperation may cause body harm or object damage.
Warning Do not put your hand into the basket until it has stopped completely. Prohibited Do not put your hands into the washing • spinning basket during the washing and rinsing process. Prohibited Even when the spinning of the basket is slow, there is still a danger of being caught in the motion, resulting injuries. Particular attention should be paid when children are around. Even when the spinning is slow, hands may be trapped by clothes.
Safety Precautions (continued) Warning Do not insert a screwdriver into the Lid Lock hold. Do not open the lid in locked status by force. Prohibited Prohibited Otherwise, the lid or locking device may be damaged, resulting in unstoppable spinning of washing • spinning basket and thus causing injuries. To avoid injuries caused by the lock damage. Attention Do not stand on or put weight on the top of the unit. Do not pull the wire from the socket when unplugging the unit.
Attention Please turn off the water tap when not using the unit. Prohibited water leakage Do not wash, rinse and spin the water proof fabric or cloth. ( To prevent damages caused by water leakage. sleeping bag, raincoat, cover of skiing, utilities, bicycles, cars and motors ) Otherwise may lead to injury by abnormal vibration during spinning or damage the washing machine, wall, floor and clothes. Do not incline installing the washing cap.
Installation Guide (continued) Installation of Washing Machine 1 Adjust the instability of the washing machine with adjustable leg. 2 Please make sure of the horizontality of the washing machine. As shown in the figure, the horizontality can be easily observed by the string used to hang an object. It is level if the A clearance between A and machine body is the same with that between A and the string machine body.
How to Change the Water Drainage Hose and How to Install the Base Plate Water drainage hose is attached on the left side of unit at shipment, nonetheless, it can be reattached on the right side to suit drainage needs. 1 Black mark Lay the unit down slowly. Back Lay the unit down on some corrugate paper to prevent damage. The water drainage hose pulled out (left) The water drainage hose pulled out (right) The water drainage hose Corrugate paper etc.
Installation Guide (continued) How to install the base plate (Mount the base plate on the pad on top of unit) ( ) Fit the barb on the plate into the square hole of the bottom, and tighten the screws. Water Drainage Hose Related Parts Ensure that the water drainage hose will not separate from its outlet even if there is vibration or the outlet is too big or too shallow. Extended the water drainage hose Attention Please use optional extension drainage tube for lengthening the water drainage hose.
How to Install the One Touch Joint 1 3 Confirm the diameter of the water tap. If the diameter exceeds 2cm, remove the joint ring. 2cm Press the sealed pad evenly against the tap and tighten the four screws in a uniform fashion. 4 2 Check the distance between joints A and B. A B 4 Screw joint B in the arrow direction to adjust the gap. B Tighten joint B in the arrow direction to reduce the gap between joint A and B to 4mm or less.
Installation Attention Please turn on the water tap to check to connecting condition of the water supply hose before washing. To prevent damages caused by water leakage due to loosen screw. How to install and remove the water supply hose Main unit Water tap Do not allow water tap, one touch joint and rubber ring to touch the unit when installing them. Turn the union nut in the direction as shown by the arrow and firmly. Connect it to the water supply opening.
Safety Check If any of the following conditions or other abnormalities occur, immediately pull out the power plug to prevent an accident and request help from an authorized dealer or agent. , , ( ) Never conduct repairs by yourself as it may be dangerous. , If you have used the washing machine for 4 - 5 years,even if the following conditions and other abnormalities do not occur, request for safety inspection of the machine is stilled required.
Control Panel Attention 14 Never press 2 (or more) buttons together, which may cause misoperation.
In the case of any of the following manual setup, the washing machine will make 2 sounds for acceptance (to announce the datum mark of indication): 2 ( ) 1 The water level is "50L"; 2The washing duration is 15 minutes ("9 minutes" + "6 minutes"). 3 Rinsing duration is "twice"; 4 The spinning duration is "6 minutes"; 5 The preset duration is "9 hours later"; 6The process switches to "NORMAL"; 7Switch wind dehydration to "basket air jet".
Control Panel (continued) Lid Lock function The lid will be locked automatically when washing for children's safe. Setup safe model 1 Close the Lid, press button. 2 Press and hold down the button for at least three seconds. 3 The buzzer makes a sound of "beep" to announce the completion of setup. Lid Lock indicator will light. To unlock the Lid Lock, repeat the above operations once again. The buzzer makes a sound of "beep" to announce the completion of remove. Lid Lock indicator will be out.
Technical Description The number next to the sign is the page number for detailed description.
Before Using Your Machine Preparation for washing machine One touch joint When the first using Turn on Water supply hose The washing machine can be used only after the proper installation in compliance with the "Installation Guide". 220V ~ 220V Daily using 1 The front of the water drainage hose must insert in the water drainage outlet. 2 3 Connect the water supply hose and turn on the water tap. Drainage outlet Insert the power plug into the socket.
How to put laundry in Put in the laundry as evenly distributed as possible. Put bulky or floating laundry in basket first. The bluejeans and other thick cloth shall be evenly distributed in the washing basket before washing. (Prevent the laundry from overflowing during washing) • Splash of water must be prevented. Sheet Jean • It smoothes rotation of the laundry. • Splash of water must be prevented.
How to Use Liquid Detergent, Bleach and Fabric Softener Start the washing machine with water in the washing basket, and the infiltration washing can't perform then. Please put the detergent in the washing • spinning basket. Powder synthetic detergent Put the detergent in the detergent dispenser Notes • When water is adhering to the detergent dispenser, please wipe it first. • When the detergent adheres to the dispenser, it remains even the dispenser is closed.
Liquid detergent/Bleach / Liquid detergent Fabric softener 1 Open the cap of the fabric softener injection opening. Dilute the liquid detergent with water and gently pour it into the injection opening. 120 • When using preset operation, dilute the detergent with twice the amount of water. Bleach Dilute the bleach with water before the washing and gently pour it into the injection opening.
Amount of Laundry and Detergent Synthetic detergent Concentrated detergent Regular detergent Amount of Laundry Water Level 5.5kg 50L 33g 42mL 67g (67mL) 3.5kg 40L 27g 33mL 53g (53mL) 1.5kg 30L 20g 25mL 40g (40mL) 0.
Selection of Laundry Process The washing machine have six laundry courses. Please select the appropriate detergent and course for laundry according to the table below. 6 Type of laundry Recommended Automatic Process NORMAL Regular laundry Normal washing for little dirty laundry. Automatically select the process suitable for washing. 24 WIND DEHYDRATION Uses powerful currents to wash, then pre-dries.
NORMAL Process Put the laundry in and press the "POWER SWITCH" button . The unit is set automatically to the "NORMAL" process. • In the case of any process other than "NORMAL", press the "PROGRAM" button to switch over. Press "START" button . Put in the detergent according to the amount and close the lid. (The sound of buzzer indicates washing completion) • The pulsator to detect the amount of laundry and display on the control panel.
Sufficient wash with economic consumption of water, electricity and time Washing of the "NORMAL" process Dissolve detergent Washing First Rinsing Second Rinsing (sprinking rinsing) ( ) (Water-storage rinsing +Waterinjection rinsing) + Spinning after draining Spinning after draining Agitating Approximately 2 minutes 2 When the spinning of the basket is slow, the water supply is beginning Spinning Spinning after draining Supply water to the required level and performing agitating and then, supply
HEAVY Process Put the laundry in and press the "POWER SWITCH" button . Press the PROGRAM button the HEAVY process. and select • With each pressing on the "PROGRAM" button, the indicator will light or flash in sequence. Press "START" button . Put in the detergent according to the amount and close the lid. (The sound of buzzer indicates washing completion) • The pulsator to detect the amount of laundry and display on the control panel.
Through wash Washing of the HEAVY process Dissolve detergent Washing First Rinsing (Water-storage rinsing) Second Rinsing (Water-storage rinsing) Spinning after draining Spinning after draining Supply water to the required level and performing agitating Supply water to the required level and performing agitating Balanced agitating Balanced agitating Agitating Approximately 2 minutes 2 Spinning Spinning after draining When using Liquid Detergent, Bleach and Fabric softener 21 21 The washing m
SPEEDY Process Put laundry in, close the lid, press the "POWER . SWITCH" button Cleans Laundry Fast Press the "START" button . (The sound of buzzer indicates washing completion.) Press the "PROGRAM" button "SPEEDY" process. , select the ( ) • This process is designed for washing clothes only with sweat but no dirt in summer. • With each pressing on the "PROGRAM" button, the indicator will light or flash in sequence. The water level is automatically set to "20L".
SOAK Process Wash with special moving steeped water flow Put the laundry in and press the "POWER SWITCH" button . Press the "PROGRAM" button the "SOAK" process. and select With each pressing on the "PROGRAM" button, the indicator will light or flash in sequence. Press the "start" button . • The pulsator to detect the amount of laundry and display on the 19 control panel.
SOAK Process (continued) Washing of the "SOAK" process Dissolve the detergent Washing First Rinsing Second rinsing (Water-storage rinsing) (Water-storage rinsing) Spinning after draining Spinning after draining Agitating+Soaking + Approximately 2 min 2 Spinning after draining Supply water to the required level and performing agitating Supply water to the required level and performing agitating Balanced agitating Balanced agitating When using Liquid Detergent, Bleach and Fabric softener 21 21
SILK Process Washing clothes with "Dry clean" label Before using your machine Please note that the washing cap should be used in SILK process • Washing without the cap may do harm to the clothes and the washing machine. The SILK process applies the mode of basket rotation, which uses the rotating water in the basket to wash the fine cloth with label and the laundry with label gently. • Some laundries can't be washed due to the cloth materials.
SILK Process (continued) Preparation for the washing Preparation for the laundry • Remove the color spot or the dark dirt before washing. • Please fasten the fasteners or the zip of laundry completely. • As to the laundries with fastener or broider, turn its inner side to external before washing. Make sure the decoloring possibility • Please make sure the decoloring possibility of the laundry.
How to wash Please do not use detergent dispenser The water level is automatically set to 30L . The water level can switch between 20L to 30L according to the washing capacity. 30L 20L 30L Make preparation 32 • The laundry amount is below 1.2kg. 1.2kg Put in the liquid detergent and close the lid. Put the laundry in and install the washing cap, then press the "POWER SWITCH" button . • Unfold the laundry evenly and fold it properly, then put it into the washing basket, with the washing cap on.
SILK Process (continued) Washing of the "SILK" process Rotating water + Soaking Draining Spinning Washing Rotating water + Soaking Draining Spinning Rinsing(twice) 2 Spinning After washing Drying methods Treatment (recovery of the shrinkage and distortion) ( ) • Sweaters of wool, Angora and cashmere shall be laid in shady and cool place after dressing to be dried in shade. • Hover the steam flatiron over the clothes, release steam and dress the clothes.
BLANKET Process Washing the comforter and blanket Before using your machine The basket rotates and creates "Blanket washing current" and "Soak" process to gently wash comforters, blanket and bed spread. Please note that washing cap should be used in BLANKET process. • Washing without the cap may do harm to the clothes and the washing machine. For installation and dismantlement of the washing cap, please see page 38.
BLANKET Process (continued) How to wash Please do not use detergent dispenser The washing machine is automatically set to 50L . It can also set water level by manual according to the washing amount. 50L Make preparation 35 Put the laundry in and install the washing cap, then press the "POWER SWITCH" button . • Unfold the laundry evenly and fold it properly, then put it into the washing basket, with the washing cap on.
Washing of the "BLANKET" process Rotating water + Soaking Draining Spinning Washing Rotating water + Soaking Rinsing (twice) 2 Draining Spinning Spinning • The washing basket rotates slowly, generate rotating water and softly wash the quilt and blanket. After the end of washing Method to take out • Opposite to the put-in sequence, pull out the comforter slowly.
Using the Washing Cap Make sure the washing cap is used in "SILK" or "BLANKET" process. The washing cap is the optional part. Installation of the washing cap 1 Bend the cap as is shown in the figure and then put it in the washing basket with the side with letter faced up. 2 1Press the washing cap on your side, squeeze the whole cap into the basket. 2Press hard the whole washing cap down and flatten it up. Push down the whole cover washing cap 2 Push down the cover close to your body.
In "BLANKET" process 1 Dismantlement of the detergent dispenser 2 1Bend the dispenser Put the washing cap into the basket, hold the central circle, and pull it right beneath the balance ring. 2Dismantle the pin from the pinhole. Do not clip the clothes when installing the washing cap. balance ring Pin Pin hole washing cap central circle Attention • Do not add any clothes on the washing cap after the installation of the cap. Attention It is prohibited to install the washing cap aslant.
Wash in Your Favorite Way Any of the processes of "Washing", "Rinsing" and "Spinning" can be set up alone, and the processes can also operate in combination. (The content of the washing will not be stored) ( ) Attention • Except the "washing rinsing spinning" and "washing spinning", when other washing modes are set, no stirring of the washings will be made for loosening clothes after the completion of drainage.
How to use the "WATER LEVEL" button How to use the "WASH" button How to use the "RINSE" button With each pressing on the "WATER LEVEL" button,the indicator will move towards the arrow. With each pressing on the "WASH" button, the indicator will move towards the arrow. With each pressing on the "RINSE" button, the indicator will move towards the arrow.
Content of the washing process This part describes the process of each process. ( ) indicates it may be manually switched within the range contained in the bracket by pressing the buttons. No ( ) means no switch.
Using the Preset for Washing Put the laundry in and press the "POWER SWITCH" button . Press the "PROGRAM" button washing mode. , select the • With each pressing on the PROGRAM indicator will light or flash in sequence. Press the "PRESET" button predefined time. Press "START" button . Put in the detergent according to the amount and close the lid. (The sound of buzzer indicates washing completion) button, the , set the • Set the time it will take to finish washing from now.
Using the Preset for Washing (continued) How to use the "PRESET" button (Switched options) The preset function allows the finishing time to be set to 6 hours or 9 hours later. This feature comes in handy when you wish to do the washing while you are out or when you wish to do the washing at night ang hang out in the morning. 6 9 Press the "PRESET" button to set the washing content.
WIND DEHYDRATION Process Cleaning and pre-drying finish at one step Clothes not suitable for this mode. • Clothes that cannot be washed in SILK process 31 31 • Clothes of easily-fade away colors • Quilt and blanket sign in washing mark • Clothes with Put the laundry in and press the "POWER SWITCH" button . Press the "PROGRAM" button and select "WIND DEHYDRATION" process. • With each pressing on the "PROGRAM" button, the indicator will light or flash in sequence.
WIND DEHYDRATION Process (continued) Washing of the "WIND DEHYDRATION" process Dissolve detergent Washing First Rinsing Second Rinsing (Water-storage rinsing) ( ) (Water-storage rinsing) ( ) Spinning after draining Spinning after draining Supply water to the required level and performing agitating Supply water to the required level and performing agitating Wind dehydration 60 min wind dehydration 60 Agitating Approximately 2 minutes 2 Balanced agitating Balanced agitating 21 When using Liqu
AIR-JET Process Preparing for AIR-JET Air Jet function helps to shorten the time for laundry airing by using of strong wind and high-speed spinning . It prevents shrinkage and transfrigure that caused by heating. • May be used to dry the heat-irresistible swimsuit or the underwear containing the amino heat-insulation materials. • Keep room free of mugginess for causing no temperature rise. Provide the same drying effect as the airing in the room. • Maximal 1.
AIR-JET Process (continued) Air-jet Process Take out the laundries after washing process, rearrange them evenly and put them into the washing basket. • The air-jet capacity can be as high as 1.5kg. 1.5kg Close the lid, open the inhaling window, and press the "POWER SWITCH" button . • Refer to the following table for approximate air-jet duration.
Proposed Operation Time The following information is for reference only. Air Jet Drying is only an supporting feature, helps shorten the time for laundry airing, but it can not dry your laundries completely. Shorten Laundry Airing Duration The duration to handle the laundry above 1.5kg (below 3.0kg) with 1 hour of air-jet is about 40% shorter than that of airing. 1.5kg (3.0kg ) 1 3~4 The maximal capacity applicable of shortening the laundry airing duration is 3.0kg. 3.0kg Approximate amount of 3.
AIR-JET Process (continued) Attention • Please well rearrange the laundries before putting them into the washing basket. Excessive or poorly-rearranged laundries may cause operation failure. Please pause the operation after the operation failure, reduce the amount of laundry and correct the laundry declination or enwinding, . If the failure remains after repeating the above procedure 2 or 3 times, please contact an authorized then press the start button service dealer.
Maintenance of Washing Basket (BASKET AIR-JET•BASKET CLEAN) (continued) • BASKET CLEAN Process It's hard for the soap alkali residue and the mildew to adhere to the stainless steel basket, but the soap alkali residue may come into being after long usage. Please perform the regular maintenance, and clean the washing basket bimonthly. 2 Press the "POWER SWITCH" button Press the "PROGRAM" button "BASKET CLEAN" process.
Use the Detergent Again 1 "Washing" only for the 1st collective of laundries. in the 2nd collective of laundries, and select and spin the 1st collec3 Rinse 2 Put the favorite washing mode. tive of washed laundries • Set the proper water level for the laundries. Laundry with slight dirt Washing only • When you select a mode different from the washing mode for the first batch washing, the adjustment of clutch may cause briefly water draining by setting to SILK and BLANKET process.
Maintenance and Repair Maintenance of nanometer titanium filter net 1 Open the inhaling window to 60 click), and remove the filter net. 60 " (you will feel a Latch Filter net holder " Nanometer titanium filter net The stains remained on inhaling window and inhaling net can be removed with a soft cloth. Inhaling window Latch Inhaling net Nanometer titanium filter net the nanometer titanium filter net onto its 4 Install holder.
Maintenance and Repair (continued) Pay attention to the rust on the washing basket The stainless basket is rustproof, but it may rust in the following cases. 1 The rust-inclined ironwork such as the barrette or the needle remains in the basket and touches the stainless steel inner wall. 2 The water containing the impurities such as rust or iron power flows into the washing basket, and the impurities adhere to the stainless steel inner wall.
4 Fit the angle hole of the filter net over the convexity of the encasing, then match the hasps on left and right sides. (push the protrusion of the angle hole into the encasing) 5 Install the lint filter. Kacha Notes • The lint filter is consumable items. When damage is found in the fiter net,please buy a new one at a dealer. 3 Attention ( Hasp ) • When the lint filter is fetched out, please do not let the coin or barrette fall in the bottom of the washing basket.
Maintenance and Repair (continued) How to maintain the water supply opening The contamination accumulated at the water supply opening will worsen the supply effect. 1 Turn off the tap, and disassemble the water supply hose. (Refer to page 12 for proper disassembly) water supply opening 12 2 Clean up the contamination accumulated at the filtering net of water supply opening. • If it's hard to clean up the contamination, disassemble the filtering net for east cleanout.
When Failure Happens About the abnormality alarm In the following cases, the flash of indicator and the sound of buzzer will announce the abnormality. If the washing machine generates unexpected error alarm, the washing machine shall be temporarily suspended for a while, and then restarted. If the same error alarm occurs again, please follow the following steps.
When Failure Happens (continued) Flash of indicator Alarm content The lid is not locked completely (The lid is not completely closed) Washing basket can not rotate (washing, rinsing, spinning) Part to check Solution Troubleshooting • Is there foreign substance under the lid? ? • Are the washings oblique? ? • Or is the washing machine placed straight? See page 7 ? 7 Restart operation Please press the "START/PAUSE" button to pause the operation, rearrange the laundry evenly, and restart with the l
Case Cause Fail to supply water No spinning, washing basket can't rotate Please refer to "Part to check" in "About abnormality alarm". 57 57 No stirring Unable to air-jet dry It doesn't work after setting of air-jet dry Can not open the lid Abnormal sound occurs No buzz at the end of washing The lid can't be opened during the operation. Water leakage Water can not be reserved (when pouring the water with water basket) • Please refer to "The Approximate air-jet duration of laundry".
When Failure Happens (continued) Automatic power OFF The power will be cut automatically at the end of operation. The power will be automatically cut if the washing machine keeps one of the following status for above 1 hour. 1 1) Pause 2) Lid open 3) Abnormality alarm describer in page 57 57 With no pressing on "START/PAUSE" button in 5 minutes after the power on, the power will be cut automatically.
Case About the sound About the rinse About the spinning About the water level Cause It buzzes or sounds "Hoola, hoola" during the high-speed washing or dehydration. • That is the electromagnetic sound of the motor switched on and off to control the rotating speed. Sprinking rinsing turns into water storing rinse or water injection. • It is because the clothes oblique cause the action of the security switch.
When Failure Happens (continued) Case About the drying time Dehydration doesn't finish beyond the predefined time. Cause • The predefined time is the time for drying dehydration, and the actual operation time need to plus the clothes dressing and oblique correction time, which, in aggregation, will be longer than the predefined time by 5~30 minutes. 5 30 About the air jet processing It is not dried.
Optional Parts Extended water drainage hose (about 80 cm) 80cm • For drainage hose extension. Washing cap (Specialized) Extended water supply hose (1m / 2m / 3m) 1m /2m / 3m • For supply hose extension.
Product Specifications Model Type Power Normal washing capacity Normal spinning capacity Normal water level Rating power Washing mode Pressure of tap water Profile dimension Weight AJ-S55GZ Fully automatic washing machine 220V~50Hz 5.5kg (the quality of dry cloth) 50L ("NORMAL" process) Washing: 380W; Spinning: 300W Automatic reverse pulsator type 0.03MPa ~ 0.8MPa 2 2 (0.3kgf/cm ~ 8kgf/cm ) W539mm x L530mm x H965mm About 28kg AJ-S55GZ 220V ~ 50Hz 5.5kg ( ) 50L( 380W ) 300W 0.03MPa ~ 0.8MPa 2 2 (0.