LED LCD HDTV OWNER’S GUIDE For Model: VZ506100
Remote Control POWER: Set the unit in standby mode; press it again to switch it on. SOURCE: Switch the input source. FAV: Press to display your favourite channel in DTV mode. D-SETUP: Display the main disc menu (DVD). INDEX: Access the list of recorded programs CH. LIST : Access the channel list. : Play the previous file. RECORD: Record program in DTV mode. : Stop playback in TIMESHIFT and MEDIA modes. : Play next file. : Move fast backward : PLAY/PAUSE in TIMESHIFT and MEDIA modes. : Move fast forward.
Remote Control OK: Confirm selection. MUTE: Mute the sound. Press again or press V+ to restore the sound. RETURN: Go back to previous page. EPG: Launch the Electronic Program Guide (DTV) D.MENU: ~ Display the main disc menu. SUBTITLE: Enable/disable subtitles. EXIT: Exit from the main TV menu displayed on the screen. TITLE: Display the DVD title menu (DVD). INFO: Display information of the current program. NUMBER BUTTONS (0-9): Press to select a TV channel directly when watching TV.
Remote Control There is a built-in keyboard on Remote back for your easy operation (for Smart Hub). IR sensors Tips: • When using the QWERTY keyboard, do not cover the area where the IR sensors are maked above. • To enter UPPERCASE letters, press the ‘Caps’ button first. • To enter numbers and characters shown on the keys in yellow, press the ‘Alt’ button first, followed by the chosen letter button. • The ‘Del’ button on the keyboard performs the backspace function.
Remote Control (Cont.) Using the remote control To use the remote control, point it towards the remote sensor at the front of the television. The remote control has a range of up to approximately six metres (6m) from the TV at an angle of up to 30 degrees each to the right and left of the sensor, as illustrated on the right. The remote control will not operate if its path is blocked. Remote Control S Sensor NOTES: • Do not drop, step on or otherwise impact the remote control.
Welcome Congratulations on choosing to buy a HITACHI product. All products brought to you by HITACHI are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 2 Year Warranty. We hope you will enjoy using your purchase for many years to come. After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Contents Remote Control ii Welcome vi General Safety Instructions 1 Installation 5 Controls and Connections 7 Getting Started 15 Basic Operations 19 Electronic Program Guide (EPG) 21 Recording 22 Smart Hub 25 Media Mode 28 Menus 32 FAQs 51 Maintenance and Recycling 53 Specifications 54 Warranty 55 vii After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
General Safety Instructions Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the completed warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Follow all instructions and take notice of all the warnings.
General Safety Instructions (Cont.) Installation • Follow instructions: Only install this TV set in accordance with the instructions in this manual. If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling and causing injury, particularly to children. • This TV is equipped with standard wall-mounting points, and we recommend that a wall bracket be installed between the TV and the wall to prevent the TV from falling from a cabinet.
General Safety Instructions (Cont.) Electrical safety and cord handling • Voltage: Before installing this TV set, make sure your outlet voltage corresponds to the voltage stated on the appliance rating label. • Protect from moisture: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture; do not use it anywhere near water; do not touch the power plug with wet hands. • Damage: Do not use a damaged power cord, plug or loose outlet. Doing so may cause an electric shock.
General Safety Instructions (Cont.) • When not in use: When not using the unit for long periods of time, disconnect the power cord from the wall outlet. Dust could accumulate over time on the unit and cause it to generate heat and ignite, or deteriorate insulation, which in turn may result in an electrical fire. • Moving: When moving the unit, be sure to turn it off and unplug it from the wall outlet.
Installation Your TV is packaged with the stand and the cabinet separated. Before using the TV, install the stand as described below, or if you want to mount it to a wall, see page 6 for mounting advice; the wall mount itself is not supplied. IMPORTANT! • Make sure the TV set is unplugged from the power supply before installing or removing the stand. • The TV panel may be awkward to install on your own. We recommend you ask someone to help with installation and/or removal of the stand.
Installation (Cont.) Wall-mounting instructions IMPORTANT! • Make sure the TV set is unplugged from the power supply before wallmounting it and removing the stand. • We recommend you contact a professional for assistance when wallmounting the TV. We assume no liability for any eventual damage to the product or injury to yourself if you mount the TV on your own. • The TV set is equipped with holes on the back panel for use with wallmounting brackets (not included).
Controls and Connections 1 2 3 1 LED LCD display screen. 2 IR (infra-Blue) sensor for remote control. 3 Power indicator. 4 CHANNEL +: select the next channel or move up/down. 5 CHANNEL -: select the previous channel or move up/down. 6 VOLUME +: increase the volume level or move left/right. 7 VOLUME -: decrease the volume level or move left/right. 8 MENU: enter the settings menu. 9 SOURCE : select the input source. 10 POWER: turn the TV on/off.
Controls and Connections (Cont.
Controls and Connections (Cont.) IMPORTANT! • Ensure all cables are disconnected from the main unit before connecting the TV to an AC power source. • Read through the instructions before connecting the TV to other equipment. Connecting to an AC power source Main unit To power outlet Connecting an external antenna For best picture quality, we recommend connecting the TV set to an external antenna.
Controls and Connections (Cont.) Internet connection LAN cable (not included) Use a RJ45 LAN cable (not included) to connect this TV with available network Coaxial (S/PDIF) connection Use a coaxial cable to connect the unit with an amplifier or other audio decoding device for coaxial audio signal output. (Coaxial cable is not included) 10 After Sales Support Telephone: Email: 1300 886 649 info@tempoaustralia.com.
Controls and Connections (Cont.) HDMI connection Use HDMI cable to connect the unit with other devices to receive highdefinition multimedia signal. HDMI cable (not included) Composite video (AV) connection AV cable (not included) For basic connection, use the composite Audio L/R (white/red) and CVBS (yellow) cable to connect the unit with other devices. NOTE: AV adapter cable’s L/R audio connections are shared between Y/Pb/Pr as well.
Controls and Connections (Cont.) PC/VGA connection PC IN AUDIO IN PC VGA Audio cable (not included) Use a VGA cable and Audio cable to connect the unit with a TV or PC, and use this product as a monitor. VGA cable (not included) 12 After Sales Support Telephone: Email: 1300 886 649 info@tempoaustralia.com.
Controls and Connections (Cont.) Component (YPbPr) connection AV IN YPbPr/AV IN VIDEO R AUDIO YPbPr L Y Pb Pr YPbPr cable (not included) Audio cable (not included) After Sales Support Telephone: Email: 1300 886 649 info@tempoaustralia.com.
Controls and Connections (Cont.) USB connection Insert a USB memory device into the USB port for PVR recording, time-shifting and playback of video/music/photo multimedia files. USB USB device (not included) Earphone connection EARPHONE cable (Not included) USB 14 After Sales Support Telephone: Email: 1300 886 649 info@tempoaustralia.com.
Getting Started IMPORTANT! Make sure all relevant equipment is properly connected (as illustrated on the previous pages) before connecting the unit to a wall socket and turning on the power. Powering the TV To turn the power on or off: • Plug the power cord into a suitable power point, then turn on the power at the outlet. • Press the POWER button, on the lower side of the back panel (or on the remote control, making sure to aim it at the sensor at the front of the TV); the indicator will glow blue.
Getting Started Step two: Country: Use the / buttons to select the country you are living in and then use the OK button to go to the next step. Press MENU button to go to previous step. Step three: Enviroment: Use the / buttons to select the environment of your new TV and then use the OK button to go to the next step. Press the MENU button to go to the previous step. 16 After Sales Support Telephone: Email: 1300 886 649 info@tempoaustralia.com.
Getting Started Step four: Network: Select “Start” and click OK to begin the network setup. Press key to select “Skip” and press OK to cancel the network setup and move to next step. Press MENU button to go to previous step. Press to select Wired or Wi-Fi connectivity type. Press down to select your chosen connectivity type and press OK to view IP settings. Press OK to save settings. You can configure the network settings later via the TV’s menu. See page 36 for detailed network setup instructions.
Getting Started Settings confirmation page will be displayed on the screen, as illustrated below. Press menu button to go back previous step. Press OK button to begin scanning for TV stations. To exit channel tuning, press the EXIT button. When auto searching is complete, your TV will show the first channel found. 18 After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Basic Operations Selecting an input source • Press the SOURCE button at the lower-left side of the back panel, or on the remote control, to display the input source list. • Press the / /left/right to select the desired input source, and then press OK to confirm your selection from the following optio ns: DTV , ATV , AV , YPBPR , PC HDMI1, HDMI2, HDMI3, MEDIA.
Basic Operations (Cont.) Favourites List • While viewing a channel, press the FAV button on the remote control to enter the Favourites List menu. • Press the / button to select the channel and press OK to watch it. • To add a channel to the Favourites List, go to SMART HUB > select ‘Channel’ and press OK > Select ‘Program Edit’ and press OK > Press up/down arrow keys to select a channel and press FAV key. • Press FAV key again to remove a favourite channel from the list.
Electronic Program Guide (EPG) EPG TV Guide (for DTV mode only) EPG stands for Electronic Program Guide. It is supplied by the program providers and offers information about the programs to be broadcast. You can access it in digital mode by pressing the EPG button on the remote control. • Press the EPG button to display the EPG interface (above).
Recording One-touch recording (in DTV mode only) IMPORTANT! Before you can record with this TV set (including time-shift recording), you must have inserted a FAT32 formatted USB storage device into the USB port. • First, insert your USB memory device into the USB port. When watching a program in DTV mode: • Press the RECORD button on the remote control to start recording directly. Press the EXIT button to minimize the information bar at the bottom of the screen.
Recording (Cont.) Time-shift recording and playback (in DTV mode only) IMPORTANT! Before you can record with this TV set (including time-shift recording), you must have inserted a FAT32 formatted USB storage device into the USB port. The time-shift function allows you to pause the live TV signal, then resume playback at your convenience. • First, insert your USB memory device into the USB port.
Recording (Cont.) Important notes When using the USB/Media function, remember the following important points: • We strongly recommend you back up all data in the USB storage device to another storage device so you do not risk losing any data in case of an unexpected device failure or accident. We do not assume liability for any loss of data due to misuse or malfunction. Data backup is your personal responsibility.
Smart Hub Press the SMART HUB key on the remote control, you can run the apps installed, access input sources and menu options.
Smart Hub Quick Links • Recording – access the list of recorded programs (USB hard disk must be connected) • Settings – access TV general menu settings • Movie – access the movie player in MEDIA mode • Photo – access the photo player in MEDIA mode • Music – access the music player in MEDIA mode • Channel – access TV channel menu settings • Program List – access the channel list • Picture – access the picture menu settings • TV Guide – access Electronic Program Guide (EPG) • Sound – access the sound menu set
Smart Hub Hyperlink Hyperlink feature allows you to share media files on your DLNA-enabled media PC, smart phone or tablet on the TV. • In order to use this function, your shared media PC or smart device and the TV must be on the same network. Also your device must have built-in media share capability or have a third-party DLNA/UPnP media server installed. • To start using Hyperlink feature, start the DLNA/UPnP media server on your device. • Start HYPERLINK application on TV from the SMART HUB page.
Media Mode Media playback • First, insert a USB memory device into the USB port. • Press the SOURCE button on the back panel, or on the remote control, to switch the unit to MEDIA mode. • Press the / / / buttons to move the cursor. • Press the EXIT button to return to the previous menu page. Press the RED button to change the device. Photo • Press the / buttons to select Photo in the main menu, then press OK to enter it. Photos files can only be played in this menu category.
Media Mode Music • Press the / buttons to select Music in the main menu, then press OK to enter it. Music files can only be played in this menu category. • Use the / / / buttons to navigate to the desired folder or file, then press OK to select and press PLAY button for playback. When playing music files: • Use the / buttons, then press OK to select a function such as NEXT,FAST FORWARD and STOP from the on-screen toolbar. After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Media Mode Movie • Press the / buttons to select Movie in the menu, then press OK to enter. Movie files can only be played in this menu category. • Use the / / / buttons to navigate to the folder or file, then press OK to select and press PLAY button for playback. When playing movie files: • Press the MENU button on the remote control to hide/display the tool bar. • Press the / buttons to select the preferred function, then press OK to confirm.
Media mode This TV set contains different settings menus where you can program your preferred settings. Once you have programmed any settings, the unit will retain them in its memory until you change them, even when switching the unit to standby mode. This means you can always operate the system under the same conditions. Menu navigation • Press the MENU button on the back panel, or on the remote control, to display the main menu. • Press the / buttons to select different submenus.
Menus Time： 32 After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus Lock： After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus Hotel Lock Lock Keypad 34 Hotel Lock Turn Hotel lock function on/off Lock sources Turn off the input sources Default sources Set default source Max Volume Set maximum volume level Default volume Set default volume level Default channel Set default channel when default source is set to DTV Export settings Export all hotel lock settings to USB drive Import settings Import hotel lock settings from USB drive Turn on/off the functionalities of the keypad on rear panel After Sales Support
Menus Option： turn After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus Network Setting： For a stable internet connection, it is recomnended to use a wired connection or place the wireless router close to the TV. Wired For Wired network connection, make sure to connect the TV to your internet router using RJ45 Ethernet cable before starting the setup process. Press / keys and select “wired” network type. The press “wired”, press ok and bellow screen will appear. 36 to highlight After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus Press OK to save the settings. If the connection is successful , the ‘Wired network is connected’ message will appear. Press Exit button to exit the menu. If the connection is unsuccessful, the ‘Wired network is not connected’ message will appear. Check the accuracy of information you have entered and try again. After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus Wi-Fi For ‘Wi-Fi Network Connection’, make sure to place your Wi-Fi Router close to the TV Press / key and select ‘Wi-Fi’ network type. Then press ‘Wi-Fi’, press OK and below screen will appear. 38 to highlight After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus Press OK to save the settings. Enter the WAP password correctly using the on-screen keypad and press connect. click OK to exit. After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus The TV will automatically begin searching for nearby Wi-Fi access Points (WAP). This may take up to 2 minutes. If your WAP doesn't appear, move your Wi-Fi router closer to the TV and press GREEN button to search again. Select the WAP you wish to use by pressing information, press YELLOW button. / button to view detailed After selecting the WAP, press OK. If the WAP has a security password, enter the password using on-screen keypad. and the press CONNECT.
Menus If the connection is successful , the ‘Internet Connected Successfully!’ message will appears. Click OK to exit. If the connection is unsuccessful, Click the security password of your WAP and its security protocal settings and try again After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus PVR Menu Settings • Recorded List - Shows the list of recorded programs (you can also use the INDEX key on the remote to access this page) • Record – schedule a program to be recorded. 42 After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus • Remind – Schedule a reminder to watch your favourite program • Schedule List – Shows the list of programs scheduled to be recorded • PVR File System Select Disk If you have multiple partitions on your disk, select the partition you wish to use. After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus • Time Shift size Press left/right buttons and change the size of the time shift buffer. • Format start Press OK and confirm to format your USB drive • Speed Check Press OK to check the speed of the USB drive 44 After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus Channel Menu Settings To access Channel menu, navigate to SMART HUB > Channel.： The password default is 0000. Auto Tuning Press OK to enter. Then select your country, tuner type, LCN and press OK to start scanning. After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus DTV Channel Tuning Press OK to enter. Press left/right to select the channel. Press OK to start scanning. 46 After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus Program Edit Press OK to enter. • Press RED button delete a channel from the channel list and EPG • Press BLUE button to skip a channel when using CH+/- buttons • Press FAV to add a channel to Favourites List; press the button again to remove from the Favourites List. HbbTV Turn on/off HbbTV (FreeviewPlus). After Sales Support Telephone: Email: 1300 886 649 info@tempoaustralia.com.
Menus Signal Information • This item is used to display signal details, such as Channel Number, Frequency, Quality and Strength. Software Update (USB) • This item is used to update software through USB memory device. 48 After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus Setting Picture Menu Settings:： To access the picture menu, navigate to SMART HUB > Picture. Picture mode selection. When “user” setting is selected contrast, Brightness, Colour, Sharpness. settings can be adjusted Auto > 4:3 > 16:9 > Zoom 1 > Wide Zoom > Panorama Adjust the picture size Natural > Warm > Cool Noise Reduction Off > Low > Middle > High Back light 0 - 100 After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
Menus Sound:： To access the sound menu, navigate to SMART HUB > SOUND Displays audio codec information for current program. 50 After Sales Support 1300 886 649 Telephone: Email: info@tempoaustralia.com.
FAQs If you experience any problems with your TV, check the list below and take any necessary steps before calling for service. If none of the solutions help you solve the problem, turn the power off and contact the after sales support line for advice. General problems with the TV set Problem Solution No power. Insert the power plug securely into the power outlet. No picture. Ensure that the equipment is connected properly. • Adjust the antenna or use an external antenna.
FAQs (Cont.) Problem Solution Play does not start, even when title is selected. • Confirm the region code setting is correct. No subtitles are displayed. • Subtitles appear only with discs that contain them. Check whether your DVD has subtitles. • Make sure to select Subtitles ON in the settings, otherwise they will not be displayed.
Maintenance and Recycling Maintenance Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
Specifications Display Device 50” (127cm) FHD LED TV Display area: 1059.8 (H) x 616.4 (V) ResolutionH 1920 x 1080 Pixel Pitch 0.57 (H) x 0.57 (V) Luminance 300 cd/m2 Contrast Ratio 2000 : 1 Aspect Ratio 16 : 9 Response Time 6.5ms Viewing Angle ±85˚ max. Multimedia Playback Format under TV Mode avi, mpeg, mpeg 4, dat, mkv, vob, rmvb,rm Operating temperature 5˚C - 35˚C Power Source 100 - 240V~, 50/60Hz Power Consumption 120 W Dimensions (mm) Weight 54 Unit: 1126.3 × 709.5 × 216.
Warranty If your product is faulty or you are experiencing difficulties using this product and require assistance please call our customer assistance helpline as listed below: Info@tempo.org This product has been manufactured to the highest quality standards. This product is warranted to the original purchaser or gift recipient and is not transferable. W a rr a nty The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase.
Warranty – The product can be personally returned to the original place of purchase for product repair, replacement or refund. Please ensure the product is properly packaged so as to ensure, that no damage occurs to the product during transit. Also make sure that you have included an explanation of the problem. In the event of goods requiring repair under warranty, the owner is responsible for the cost of transportation.
