HD COLOR CAMERA SYSTEM REMOTE CONTROL UNIT RU-3400JY/VR S10 OPERATING INSTRUCTIONS RU-1200 RU-1200JY CAM POWER BARS TEST MASK MENU CTL HEAD EXT CHART AUTO SETUP CAM NO. AUTO WHITE AUTO KNEE CAM POWER BARS TEST MASK B.STR SKIN DTL AUTO KNEE AUTO BLACK BREAK OFF MENU CTL HEAD EXT CHART AUTO SETUP AUTO WHITE AUTO BLACK BREAK OFF CAM NO. SCENE FILE 1 2 3 4 5 6 7 8 SHUTTER 2 3 SCENE FILE MEMORY 5-8 A B C D E CAP 1 2 ENCR 3 4 ENC S.
Note: The model and serial numbers of your product are important for you to keep for your convenience and protection. These numbers appear on the nameplate located on bottom of the product. Please record these numbers in the spaces provided below, and retain this manual for future reference. Model No. Serial No.
SAFETY INSTRUCTIONS Carefully read all safety messages in this manual and safety Instructions on your equipment. Follow recommended precautions and safe operating practices. SAFETY ALERT SYMBOL ! This is the “Safety Alert Symbol.” This symbol is used to call your attention to items or operations that could be dangerous to you or other persons using this equipment. Read these messages and follow these instructions carefully.
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the product and the operating instructions should be adhered to. 4. Follow Instructions All operating and use instructions should be followed. 5. Cleaning Unplug this product from the wall outlet before cleaning.
14. Lightning For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. 15. Overloading Do not overload wall outlets, extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock. 16.
WICHTIGE SICHERHEITSANWEISUNGEN 1. Alle Anweisungen lesen. Vor Betrieb des Erzeugnisses sollten alle Sicherheits-und Bedienungsanleitungen gelesen werden. 2. Die Anweisungen aufbewahren. Die Sicherheits-und Bedienungsanleitungen sollten fünftigen Bezug aufbewahrt werden. 3. Warnungen beachten. Die Warnungen auf dem Erzeugnis und in den Bedienungsanleitungen solten beachtet werden. 4. Anweisungen befolgen. Alle Bedienungsanleitung-und Verwendungsanweisungen sollten befolgt werden. 5.
14. Blitzschlag Für zusätzlichen Schutz des Erzeugnisses während eines Gewitters oder bei Nichtverwendung für lange Zeit den Stecker aus der Steckdose ziehen. Dies verhütet Beschädigung durch Blitzschlag und Netzspannungsstöße. 15. Überlastung Wandsteckdosen, Verlängerungskabel und eingebaute Bequemlickkeitssteckdosen nicht überlasten, da dies Feuer oder elektrischen Schlag verursachen kann. 16.
MISES EN GARDE IMPORTANTES 1. Lire les instructions Lire toutes les instructions de sécurité et de fonctionnement avant de faire fonctionner l’appareil. 2. Conserver ces instructions Conserver les instructions de sécurité et de fonctionnement á des fins de référence ultérieure. 3. Tenir compte des avertissements Tous les avertissements qui figurent sur l’appareil et dans le mode d’emploi devront être respectés. 4. Observer les instructions Observer toutes les instructions de fonctionnement et d’utilisation.
14. Foudre Pour renforcer la protection de l’appareil pendant un orage, ou si l’on s’en éloigne ou qu’on reste longtemps sans l’utiliser, le débrancher de la source d’alimentation. Ceci permettra d’éviter tout dommage de l’appareil dú á la foudre et aux surtensions de ligne. 15. Surcharge Ne pas surcharger les prises, rallonges et prises multiples car cela pourrait entraîner un risque de feu ou de choc électrique. 16.
IMPORTANT NOTICE For USA These products have been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Contents Outline and features .......................................................................................................................................... 1 Facility names and functions ............................................................................................................................. 2 Function menu ...................................................................................................................................................
Outline and features 1.General The remote control unit RU-3400JY/VR(S10) is connected to the camera control unit (CCU) for remote operation of the camera. The RCU and CCU can be up to 100 meters apart. With the one touch color temperature control function, the RU-3400JY/VR(S10) is ideal not only Studio but also OB van use. RU-3400JY-S10 : Lens iris control, pedestal control and preview switch are assembled with an axis joystick control knob.
Facility names and functions (Front) FRONT VIEW (JY type) A1 R U-3400JY RU-1200JY CAM POWER BARS TEST MASK MENU CTL HEAD EXT CHART AUTO SETUP SKIN DTL AUTO KNEE AUTO BLACK BREAK OFF A3 AUTO WHITE A2 A1 Camera power on/off A4 A2 Each type on/off control A3 Menu switch: Menu is displayed on the pix monitor with Color bar ON.
Facility names and functions (Front) FRONT VIEW (VR type) RRU-1200 U-3400 A1 CAM POWER BARS MASK TEST SKIN DTL B.STR A1 Camera power on/off A2 Each type on/off control A3 Menu switch: Menu is displayed on the pix monitor with Color bar ON.
Facility names and functions (Rear) REAR VIEW B2 B1 . B3 B1 Remote-Input connector Input and output remote control data between the camera control unit . B2 EXT IRIS connector Connect to the external iris control module (optional) B3 PRE VIEW Connector (JY type only) Connect to preview switcher to switch the preview monitor input.
Function menu The camera head is connected with the CCU and the RU/SU as an operational camera system, The CCU output display TOP MENU on the PIX out monitor as follows. TOP This is for Video operator at the CCU. MENU PIX MENU: open this menu by pushing the MENU SW in the ■ COLOR :> DETAIL :> RCU.
Function menu 1. COLOR menu structure which are displayed in the Pix monitor or are displayed in the viewfinder with at control head mode.
Function menu 2. DETAIL menu structure which are displayed in the Pix monitor or are displayed in the viewfinder with at control head mode.
Function menu 3. MAINTENANCE menu structure which are displayed in the Pix monitor or are displayed in the viewfinder with at control head mode.
Operation procedure 4. FILE menu is displayed in the Pix monitor or are displayed in the viewfinder with at control head mode.
Operation procedure Item Function no. Camera head 1 Switch CAM POWER Power supply on 2 3 On/off control Menu start Operating procedure ・ CAM POWER switch on The camera head power on by this switch pressing. ・The camera head power off by this switch pressing more than 2 seconds continuously. BARS ・Color bar on/off selection TEST ・Test signal on/off selection MASK ・HD masking on/off selection B.STR ・Black stretch on/off selection. SKIN DTL ・Skintone detail on/off selection.
Item Function no. AUTO SETUP 5 Switch Operating procedure AUTO SETUP ・ Switch settings can be combined with the following auto setup modes. (1) Grayscale auto setup EXT CHART EXT CHART AUTO SETUP (2) Auto skin tone EXT CHART (2 times) AUTO SETUP (3) Auto Shading EXT CHART (3 times) AUTO SETUP 1. Conduct grayscale auto setup by the following procedure. (1) Set the EXT CHART switch to on to show the grayscale chart positioning markers on the CCU pix monitor and viewfinder.
Item Function no. AUTO SETUP (5 ) Switch Operating procedure 2. Auto skin tone (1) Press the EXT CHART 2 times to show the center marker on the viewfinder and PIX monitor screen. (2) Align the marker with the image for color phase detection. (3) Press the AUTO SETUP to detect the color phase at the marker position and revise the skin DTL phase data. 3.Auto shading (1) Press the EXT CHART 3 times to show the marker for auto shading on the viewfinder and PIX monitor screen.
Item Function no. AUTO WHITE 6 Switch AUTO WHITE Operating procedure ・Pickup a white scene and press the AUTO WHITE for automatic white balance adjustment. ・At white balance, the AUTO WHITE LED flashes for several seconds and the buzzer sounds. 7 AUTO BLACK AUTO BLACK ・Press the AUTO BLACK to cut off the light and automatically adjust the black balance. ・At black balance, the AUTO BLACK LED flashes for several seconds and the buzzer sounds. 8 Curtail auto BREAK OFF CAM NO.
Item Function no. 1 1 Scene file Switch - SCENE FILE - memory Operating procedure ・Scene file adjustment values can be stored in memory by the following procedure. 1 2 (1) Press the 3 (2) The 4 (3) Press the scene file ( 5-8 5-8 MEMORY switch. MEMORY LED begins flashing. MEMORY – 1 or 4 ) for storing data in the memory. (4) The selected scene file LED flashes and the MEMORY LED lights for about 3 seconds. This completes storing memory.
Item Function no. 1 4 ND/CC filter Switch < ND Operating procedure > ・ND/CC selects ND filters or CC(ECC) filters. Each filters status are shown by selection < CC > the upper section ND/CC LEDs of these switches. LEDs and filters relationship are as shown below. HEAD ND 5600 CC(ECC) CAP:CAP A:3200 1:100% B:4300 2:CROSS C:5600 3:6.25% D:6300 4:1.6% E:8000 ・When the switch is set to on, the HEAD ND/CC filter control priority shifts to the camera head.
Item Function no. 1 6 Manual adjustment Switch Operating procedure ・Select adjustment items with the manual control section switches. The display section shows the adjustment item and value. ・Use the rotary encoder to adjust the items for optimum values. * Adjustment CTL VALUE value display ・When the CTL VALUE switch is on, the adjustment value is displayed from -100 to +100.
Item Function no. (16) Manual adjustment Switch Operating procedure ・ Press again the switch for the following display. (4)DETAIL KNEE DTL 4 DETAIL KNEE WHT BLK WHT: Additional white component glare reduction. BLK: Additional black component glare reduction. the switch for the following display. ・Press (5)BALANCE DTL 5 BALANCE P/N P/N: Detail positive (white) side adjustment (4/8~8/4) (6)WHITE DTL DTL 6 ・Press again the switch for the following display.
Item Function no. (16) Manual adjustment (3)NTSC(PAL) Switch DTL Operating procedure ・Press again the switch for the following display. 3 CRISP NTSC CRISP H-CR V-CR (4)NTSC(PAL) DTL ・Press again the switch for the following display. 4 DTL KNEE (5)NTSC(PAL) NTSC DTL KNEE WHT BLK DTL ・Press again the switch for the following display.
Item Function no. (16) Manual adjustment (4)PHASE/WIDTH Switch SKIN DTL Operating procedure 4 ・Press again the switch for the following display. (Ch2) SKIN DETAIL-2 PH-C PHAS WIDH PH-C: Skin color phase select (coarse adjustment) (R-MG,MG-B,B-CY,CY-G,G-YE,YE-R) PHAS: Skin color phase select (fine adjustment) WIDH: Skin color phase range select (5)CHROMA SKIN DTL 5 ・Press again the switch for the following display.
Item Function no. (16) Manual Adjustment Switch Operating procedure 4 ENC timing adjust (1)ENC TIMING 【Display】 SHIFT SKIN DTL 1 ENC TIMING SC-C SC-P H-P SC-C: Subcarrier phase adjustment (coarse) SC-P: Subcarrier phase adjustment (fine) H-P: H phase adjustment (2)Y/C LEVEL SKIN DTL 2 ・Again press the switch for the following display. Y/C LEVEL Y C Y: Encoder Y level adjust C: Encoder C level adjust (3)ENC TIMING 2 SKIN DTL 4 ・Again press the switch for the following display.
Item Function no. (16) Manual adjustment Switch Operating procedure 5 Masking adjustment (1)Skintone MASK 1 【Display】 SKINTONE MASK SAT HUE SAT: Skintone saturation adjustment HUE: Skintone hue adjustment (2) R (Red) MASK 2 ・Again press the switch for the following display. MASK R SAT HUE SAT: R (red) saturation adjustment (following the same for each color). HUE: R (red) hue adjustment (following the same for each color). (3) Y-R MASK 3 ・Again press the switch for the following display.
Function (16) Switch Operating procedure Manual adjustment (9) B-C MASK 9 ・Again press the switch for the following display. (Blue-Cyan) MASK B-C SAT (10) B (Blue) MASK 10 HUE ・Again press the switch for the following display. MASK B SAT (11) M-B MASK 11 HUE ・Again press the switch for the following display. (Magenta-Blue) MASK M-B SAT (12) M (Magenta) MASK 12 HUE ・Again press the switch for the following display.
Item Function no. (16) Manual adjustment 6 Shutter adjustment Switch Operating procedure 【Display】 SHUTTER SHUTTER VAR VAR: Variable adjust 1/59~1/1983 (1080i/60) 1/50~1/2008 (1080i/50) (*) Set the upper shutter SEL switches to variable mode when Variable adjustment. 7 Auto iris adjust (1)IRIS GATE 【Display】 SHIFT SHUTTER 1 AUTO IRIS GATE Gate: Auto iris gate selection (1 – 6, see figure) 1 4 2 3 5 6 The above gate signal is displayed also on CCU pix monitor.
Item Function no. (16) Manual adjustment (2)IRIS TRIM Switch SHUTTER Operating procedure 2 ・Press again the switch for the following display. SPED AUTO IRIS P/AV SPED: Adjusts the auto iris response speed. If response speed becomes fast then adjustment value will be big and adjustment value become small then response speed will be slow. P/AV: Adjusts the ratio between peak and average. (3)IRIS RANGE SHUTTER 3 (0/10~5/5) ・Press again the switch for the following display.
Item Function no. (16) Manual adjustment 8 Black stretch Switch Operating procedure 【Display】 B.STR BLACK STRETCH LEVL adjustment LEVL: Black stretch level adjustment 9 On/off control (1) DTL DTL KNEE 【Display】 SHIFT B.STR 1 DTL ON DTLKNE ON GATE OFF SKIN GATE DTL: Detail on/off DTLKNE: Detail knee on/off GATE: Skintone gate on/off ・ Press again the switch for the following display. (2) KNEE B.STR 2 KNEE ON W.
Item Function no. (16) Manual adjustment Switch Operating procedure ・Press again the switch for the following display. (5)SKINDTL- B.STR 5 CH – SKINDTL– IND 1 1 CH,IND CH:Select skintone detail channel (1,2,1+2) IND:Select skintone gate channel l (6) ASPECT B.STR 6 (1,2) ・Press again the switch for the following display. COMB FILTER ASPCT 4:3 MONO COMB ON MONO OFF ASPCT: Selects aspect ratio (16:9 or 4:3) COMB: NTSC output comb filter on/off MONO: Mono color on/off (7) NTSC MASK B.
Item Function no. (16) Manual adjustment Switch Operating procedure 10 BLACK adjustment (1) BLACK BLACK 1 【Display】 BLACk G R B Pedestal (RGB) adjustment (2) BLACk SETUP LEVEL MENU SHIFT + + SETUP LEVEL 5.0 PED Black setup level adjustment (0~12.3%) 11 Flare adjustment (1)FLARE 【Display】 FLARE R FLARE G B Flare (RGB) adjustment (2) FLARE SETUP LEVEL MENU + SHIFT + SETUP LEVEL 12.0 FLARE Flare setup level adjustment (0~24.
Item Function no. (16) Manual adjustment Switch Operating procedure 12 Gamma adjustment (1) GAMMA GAMMA 1 【Display】 GAMMA G R B Gamma (R, G, B) adjustment (2) PAINT GAMMA 2 ・ Press again the switch for the following display. - GAMMA R PAINT GAMMA TOTL B Paint gamma (R,TOTL, B) adjustment (3) GAMMA GAMMA 3 GAMMA TABLE TOTL TABLE Special gamma (rising component) adjustment (3.0~8.0(0.5step)) (4) GAMMA SETUP LEVEL MENU + SHIFT + SETUP LEVEL 58.0 GAMMA Gamma setup level adjustment (42.
Item Function no. (16) Manual adjustment 14 Knee/slope adjustment (1) KNEE Switch KNEE/SLOPE Operating procedure 1 【Display】 KNEE TOTL R B Knee point (R, total. B) adjustment (2) SLOPE KNEE/SLOPE 2 ・Press again the switch for the following display. R SLOPE TOTL B Slope (R, total, B) adjustment (3)WHITE CLIP KNEE/SLOPE 3 ・Press again the switch for the following display.
Item Function no. 17 Gain and black Switch PAINT ENABLE adjust Operating procedure ・Gain and black adjustment with PAINT ENABLE switch on Adjustable by control -GAIN・Setting -BLACKG.gain/C.temp adjust G.GAIN/C.TEMP PAINT ENABLE to off returns pedestal control to center detent position. Set to C.Temp to operate the G.Gain control as follows. Turn clockwise to raise blue and lower red gain. Turn counter-clockwise raise red and lower blue gain. When switch is set to G.
Item Function no. 22 Lens extender Switch X2 Operating procedure ・Lights when lens extender X2 is on. Indication 23 TALLY CALL X0.8 ・Lights when lens extender X0.8 is on. CALL ・R tally LED lights when CALL switch is pressed. ・Tally call from camera head and CCU: The R tally LED lights and the buzzer sounds. 24 Preview switch (JY type only) ・ Press the joystick inward to short the Preview connector pins #2 and #3 in the rear panel.
Service information 1. CONNECTION Connector pin diagram 1-1. Remote connector Remote HR10A-7R-4P(74) 1 Pin 1 2 3 4 4 2 3 1-2. Preview connector +12V SD(TX) SD(RX) GND PREVIEW RM12BRD-3PH(71) 3 1 2 1-3. Ext IRIS /UTILITY OUT (OPTION) A Signal H Pin 1 2 3 Signal PREVIEW+ NC PREVIEW- EXT IRIS /UTILITY OUT (OPTION) R05-R8F G B F C D E 32 Pin Signal A EXT_M.
Specifications EXT IRIS PRE VIEW (4.5) (11.5) t2 CCU . Rating (1) Dimensions: 102 (W) x 370 (D) x 55 (H) mm (2) MASS: 1.5 kg (3) Power input: DC+12V (4) Ambient temperature: 0 to +40 °C Dimensions RU-3400JY RU-1200JY RU -3400JY ±1 65 SCENE FILE 1 2 5 6 SHUTTER 3 4 7 8 5-8 MASTER GAIN HEAD MONITOR SELECT R G B SUP ENCR SEQ 5 6 00 WHITE SHAD SCENE PRESET MANUAL CONTROL PAL SKIN DTL B.STR BLACK ±1 ±1 361 370 DTL GAIN BPED LACK 55 ±1 73 ±2 2-φ4 (4.5) (11.
Specifications Rating (1) Dimensions: 102 (W) x 340 (D) x 55 (H) mm (2) MASS: 1.5 kg (3) Power input: DC+12V (4) Ambient temperature: 0 to +40 °C Dimensions RU-3400VR EXT IRIS CCU (11.5) (4.5) t2 RU-1200 R U-3400 65 ±1 SCENE FILE 1 2 3 4 5 6 7 8 SHUTTER 5-8 MASTER GAIN HEAD MONITOR SELECT R G B ENCR SUP 56 00 SEQ MANUAL CONTROL PAL 331±1 340±1 WHITE SHAD BLACK SCENE PRESET GAIN BFLARE LACK IRIS 55±1 14±1 2-φ4 (4.5) (11.