32" LCD Colour Television L32HP03U Instructions for use GB
Contents Features ................................................................. 3 Accessories ............................................................ 3 Introduction ............................................................. 4 Preparation ............................................................. 4 Safety Precautions ................................................. 4 Power Source ..................................................... 4 Power Cord ...............................................
Viewing JPG Files............................................. 32 Slideshow Options ............................................ 32 Video Playback ................................................. 33 Navigating the Analogue TV Menu System .......... 33 Analogue TV Menu System .................................. 33 Picture Menu..................................................... 33 Mode ............................................................. 33 Brightness/Contrast/Colour/Sharpness ........
Features Accessories • Remote controlled colour LCD TV. • Fully integrated digital TV (DVB-T). • Two HDMI connectors for digital video and audio. This connection is also designed to accept high definition signals. M SELECT INFO OK ABC DEF GHI 1 2 3 MNO PQR JKL • 200 programmes from VHF, UHF. 5 4 • OSD menu system. 6 VWX STU YZ 7 8 9 PP 0 -/-EXIT • Two scart sockets for external devices (such as video, video games, audio set, etc.). • Stereo sound system.
Introduction Moisture and Water Thank you for choosing this product. This manual will guide you in the proper operation of your TV. Before operating the TV, please read this manual thoroughly. Please do keep this manual in a safe place for future references. Preparation For ventilation, leave a free space of at least 10 cm all around the set. To prevent any faults and unsafe situations, please do not place any objects on top of the set. Use this device in moderate climates.
replacement parts, which are specified by the manufacturer or have the same specifications as the original one. Unauthorized substitutions may result in fire, electrical shock or other hazards. Servicing Disconnecting the Device The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable. Headphone Volume Please refer all servicing to qualified personnel. Do not remove the cover yourself as this may result in an electric shock.
Overview of the Remote Control 1. Standby 2. Cursor up 1 32 3. Cursor right 31 4. Info 2 3 30 5. Numeric buttons 6. Exit (in DTV mode) M 29 28 7. Programme up 4 SELECT 8. Volume up INFO OK 9. TV / Digital TV ABC DEF 10. AV / Source 1 2 3 11. Yellow (Feature menu) / Current language (*) JKL MNO PQR 12. Blue (Install menu) / Favourite selection (*) 5 4 13. Hold (in TXT mode) / PIP position 14. Update (in TXT mode) / PAP mode YZ 7 8 9 PP 0 -/-EXIT 15.
LCD TV and Operating Buttons FRONT VIEW 1. Standby button 2. TV/AV button 3. Programme Up/ Down buttons 4. Volume Up/Down buttons Note: Press “ ”/ “ ”buttons at the same time to view main menu. SIDE VIEW REAR VIEW English - 7 A00-[GB]-MB35_IDTV-UK_BRONZE3_32856W_1050UK_10059319_5013xxxx.indd 7 15.12.
Viewing the Connections- Back Connectors 12 5Vdc 60mA 1. S/PDIF Digital Out outputs digital audio signals of the currently watched source. Use a digital optic cable to transfer audio signals to a device that has S/PDIF input. 2. Subwoofer Out is for connecting an external, active subwoofer to the set to give a much deeper bass effect. Use an appropriate RCA cable to connect the set to a subwoofer unit. 3. Audio Line Out outputs audio signals to an external device such as an optional sound system.
6. Component Video Inputs (YPbPr) are used for connecting component video. You can connect the component video and audio sockets with a device that has component output. Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”, “Pb”, “Pr” correspond with your device’s connectors. 7.
Viewing the Connections - Side Connectors 1. CI Slot is used for inserting a CI card. A CI card allows you to view channels that you subscribe to. For more information, see “Conditional Access” section. 2. Side USB input. Note: Codec update cannot be performed. 3. Headphone jack is used for connecting an external headphone to the system. Connect to the HEADPHONE jack to listen to the TV from headphones. 4. Video Input is used for connecting video signals from external devices.
Power Connection IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. • Plug the power cable to the mains socket outlet. Aerial Connection • Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
Using Digital Multimedia Connectors • You can connect USB devices to your TV by using the USB input of the TV. This feature allows you to display/play JPG and MP3 files stored in a USB stick. • It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with this TV. • You may back up your files before making any connections to the TV set in order to avoid any possible data loss. Note that manufacturer will not be responsible for any file damage or data loss.
Connecting the LCD TV to a PC For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set. • Power off both computer and display before making any connections. • Use 15-pin D-sub display cable to connect a PC to the LCD TV. • When the connection is made, switch to PC source. See “Input selection” section. • Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix section.
Connecting to a DVD Player If you want to connect a DVD player to your LCD TV, you can use connectors on the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections. Note: Cables shown in the illustration are not supplied. • If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source.
Using Side AV Connectors You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied. • For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection” in the following parts. • To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV.
Using Other Connectors You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied. • For connecting a to a device that has SPDIF support, use an appropriate SPDIF cable to enable sound connection. • To connect external speakers; connect the audio output sockets on the TV to an external amplifier that is connected to a speaker system.
Connecting Other Equipment via Scart Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder to your LCD TV by using the SCART sockets. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections. For more information, refer to your device’s own instruction book.
Inserting Batteries in the Remote Control Handset Switching the TV On/Off To Switch the TV On • Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part. • Insert two AAA/R3 or equivalent type batteries inside. Place the batteries in the right directions and replace the battery cover. · Connect the power cord to the 220-240V AC 50 Hz. ” button to position “|” so the TV · Switch the “ will switch to standby mode. Then the standby LED lights up.
Input Selection Once you have connected external equipment to your TV, you can switch to different input sources. ” repeatedly on the remote control • Press “ to select the required source. or, • Select “Source” option from the main menu by using “ ” or “ ” button. Use then “ ” or “ ” button to highlight an input and press “ ” button to select. Note : You can mark desired source options by pressing the OK button.
Initial Settings When the TV set is operated for the first time, the IDTV turns on first. After Automatic Search is completed, the following message asking for analogue channel search appears on the screen: Because this is the first time the TV is used, there are no channels stored in the memory. When the TV is turned on for the first time, the menu for the language selection appears on the screen.
General Operation Pressing the “TV/DTV” button at any time while watching television programmes will switch the TV set between the digital terrestrial television broadcasting and normal analogue broadcasting. Information Banner • Whenever you change channel, using the P- / P+ button or the numeric buttons, the TV displays the broadcast picture along with an information banner at the bottom of the screen (available only in DTV mode). This will remain on the screen for a few seconds.
BLUE button (Next day) : displays the programmes of the next day. Digital teletext is sometimes broadcast at the same time with the normal broadcast. INFO (Details): displays the short extended programmes in detail. • Press the TELETEXT ( • The digital teletext information appears. Numeric buttons (Jump): go to preferred channel directly via numeric buttons. • Operate it with the coloured buttons, cursor buttons and “OK” button. OK : views options for future programmes.
IDTV Menu System The IDTV menu can only be viewed when watching digital terrestrial broadcasting. Press the TV/DTV button to turn IDTV on while the TV is in analogue mode. Press the “M” button. The menu below appears on the screen: To watch a specific channel, highlight it using “ ” or “ ” button and then press “OK” button, while the “Select” item on Channel List menu is highlighted by using “ ” or “ ” button.
Press the “M” button to cancel the editing or OK button to save the new name. Adding Locks to Channels Channel locking provides a password-protected access to channels selected by parents. In order to lock a channel you should know the parental lock password (default value is set to 0000 in the factory and can only be changed from the Configuration menu). • Press the OK button to delete the highlighted channel in the channel list.
How to Add a Channel to a Favourites List Program Guide • By pressing “ ” or “ ” buttons, highlight the channel that you want to add to the favourite list. This section is same with the instructions given in the General Operations page. Please see Electronic Programme Guide (EPG) section in the General Operations part. • Select the list number by pressing “ ” or “ ” buttons. Timers • By pressing OK button, the highlighted channel is added to selected list number.
Note: You can set timers for the desired broadcast and time. Recording broadcasts is also possible by using a recording device that you connect to your TV’s Ext Out. When the timer is due, output will be provided via the TV-Out and the recording can be performed by the connected recorder that you have set.
not be located while in automatic search or manual search. Use “ ” or “ ” button to select Scan Encrypted and then press “ ” or “ ” button to set this setting as On or Off. Receiver Upgrade Over Air Download (OAD) AC3 Audio (*for EU countries only) In the Configuration Menu, highlight the AC3 Audio item by pressing “ ” or “ ” buttons. Use the “ ” or “ ” buttons to set the AC3 Audio as On or Off. If the channel that you are watching supports AC3 Audio, turn this setting on.
• After the search progress is completed, the message “ Completed searching for upgrade. No new software was found” appears on the screen if no new software is found. • Do not forget to re enable the automatic OAD function after you have made your recording by repeating the above instructions but this time selecting ENABLE. Note: Your TV may start in First Time Installation mode after OAD update. Parental Control Use “ ” or “ ” buttons to go to Parental Lock option. Press “OK” button to enter the menu.
on the screen during the natural pauses in the audio (and sometimes during dialogue, if deemed necessary). You can use this feature, only if the broadcaster supports that additional narration track. Use “ ” or “ ” buttons to select an item. Then use “ ” or “ ” buttons to set. Audio Description This function enables or disables the audio description feature by pressing the “ ” or “ ” buttons. Preferred Language By pressing the “ ” or “ ” buttons the preferred audio description language is being changed.
Installation The Installation menu is mainly intended to help you for creating a Channel Table in the most efficient way. Select Installation from the Configuration menu by pressing “ ” or “ ” buttons. This menu includes the following items: • Automatic channel scan • Manual Channel Scan • Clear Service List (*) • First Time Installation (*) For Denmark, Sweden, Norway or Finland. Automatic Channel Scan Select your Country , Language and Text language by using “ ” or “ ” and “ ” or “ ” buttons.
Press OK to cancel. Select Yes by pressing “ ” or “ ” button and press OK to delete all of the channels. Press the OK button to search for analogue channels. The following menu appears on the screen for analogue channel search: First Time Installation The user can use this item to load default settings, which were loaded to the receiver at the factory. To install factory settings, highlight “First Time Installation” menu item and press OK button, then you will be asked whether or not to delete the settings.
Loop (Blue button) : Plays the selected file repeatedly. Viewing JPG Files Select YES by pressing “ ” or “ ” button and press OK button. Media browser will be displayed. Jump (Numeric buttons) : jump to selected file using the numeric buttons. OK : views the selected picture in full screen. Play / Slideshow (Green button) : starts the slideshow with all pictures in the folder. • You can play music, picture and video files from a USB memory stick.
Video Playback Play (Red button) : Starts the video playback. Stop (Blue button) : Stops the video playback. Navigating the Analogue TV Menu System For displaying menu options For navigation Pause (OK button) : Pause the video playback. M To confirm choices SELECT Rewind (Cursor Left) : Goes backward. INFO OK • Press “M” to display the main menu. Forward (Cursor Right) : Goes forward. Menu (Menu button) : Sets subtitle/Audio. • Press “ ” or “ ” button to select an icon.
Colour Temp Press “ ” or “ ” button to select Colour Temp. Press “ ” or “ ” to choose from one of these options: Cool, Normal and Warm. Note: • Setting Cool option gives white colours a slight blue stress. • Setting Warm option gives white colours a slight red stress. • For normal colours, select Normal option. Noise Reduction If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the amount of noise.
Press “ ” or “ ” button to change the preset. In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Classic and User. Spdif Out Press “ ” or “ ” button to select Spdif Out. Press “ ” or “ ” button to set the Spdif Out. as On or Off. Select the desired frequency by pressing “ ” or “ ” button and increase or decrease the frequency gain by pressing “ ” or “ ” button. Note: If Spdif Out is set to On, headphone will be disabled. Press the “M” button to return to the previous menu.
the following settings will appear on the same menu screen. Child Lock Note that if you switch to PAP mode by using Pip-Pap setting, only Source and Swap options will be active among the menu settings. Use “ ” or “ ” button to set the Child Lock On or Off. When On is selected, the TV can only be controlled by the remote control handset. In this case the control panel buttons (except for the STANDBY button) will not work. Pip-Pap This line controls Pip/Pap modes.
Teletext Language Colour System Press “ ” or “ ” button to select Teletext Language. Use “ ” or “ ” button to change Teletext Language to West, East, Turk/Gre, Cyrillic, Arabic or Persian.. Press “ ” or “ ” button to select Colour System. Use “ ” or “ ” button to change the colour system to PAL,SECAM,PAL60,AUTO,NTSC 4,43 or NTSC 3,58. Antenna Power (optional) Sound System When antenna power option is set as On, +5V will be transmitted to the antenna output.
Store Press “ ” or “ ” button to select Store Program. Press “ ” or OK button to store the settings. “Stored...” will be displayed on the screen. Program Table programme list, and the following programmes shift one line up. APS (Auto Programming System) When you press the BLUE button to start automatic tuning, Auto Programming System menu will appear on the screen: Select Program Table by pressing “ ” or “ ” button.
Source Menu Press “ ” or “ ” button and select the sixth icon. Then press “ ” or OK button. Source menu appears on the screen: PC Mode Menu System See “Connecting the LCD TV to a PC” section for connecting a PC to the TV set. For switching to PC source, press “ ” button on your remote control and select PC input. You can also use “Source” menu to switch to PC mode. Note that PC mode menu settings are available only while the TV is in PC source. PC Position Menu Press MENU button.
Select V Position item by using “ ” or “ ” button. Use “ ” or “ ” button to adjust the value. Phase Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method. Select Phase item by using “ ” or “ ” buttons. Use “ ” or “ ” button to adjust the value.
4:3 Picture Mode Selection By pressing PP button, you can change Picture Mode settings in accordance with your viewing requirements. Available options are Dynamic, Natural and Cinema. Use to view a normal picture (4:3 aspect ratio) as this is its original size. Note : This function will not be available while in PC mode. Panoramic Freezing Picture You can freeze the picture on the screen by pressing the “OK” button on the remote control. Press the “OK” button to freeze picture.
Note: You can shift to screen up or down by pressing “ ” / “ ” buttons while picture zoom is selected as Auto, Panoramic, 14:9, Cinema, Subtitle or Zoom. Teletext Teletext system transmits information such as news, sports and weather on your TV. Note that if the signal degrades, for example in poor/adverse weather conditions, some text errors may occur or the teletext mode may be aborted. Teletext function buttons are listed below: “ ” Teletext On-Off / PAT Mode Activates teletext mode when pressed once.
Sound Tips Screen Care Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety, unplug the mains plug when cleaning the set. When moving the TV, support it from the base. Image Persistence Please note that ghosting may occur while displaying a persistent image. LCD TVs’ image persistence may disappear after a short time. Try turning off the TV for a while.
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1920 x 1200. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen. Note: Resolution modes indicated with (*) are not available for PIP/PAP modes.
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) Source EXT-1 (SCART 1) EXT-2 (SCART-2) FAV YPbPr HDMI1 HDMI2 Supported Signals Available PAL 50/60 O NTSC 60 O RGB 50 O RGB 60 O PAL 50/60 O NTSC 60 O RGB 50 X RGB 60 X S-VHS 50 O S-VHS 60 O PAL 50/60 O NTSC 60 O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P
Appendix C: Pin Specifications SCART connector pin specifications Pin Input signal Pin 1 AUDIO OUT (RIGHT) 12 Input signal Not used 2 AUDIO IN (RIGHT) 13 RGB-R GND 3 AUDIO OUT (LEFT/MONO) 14 GND 4 AUDIO GND 15 RGB-R / S.VHS CHROMINANCE IN 5 RGB-B GND 16 BLANKING SIGNAL 6 AUDIO IN (LEFT/MONO) 17 COMPOSITE VIDEO GND 7 RGB-B IN 18 BLANKING SIGNAL GND 8 AUDIO / RGB SWITCH / 16:9 19 COMPOSITE VIDEO OUT 9 RGB-G GND 20 COMPOSITE VIDEO / S.
Appendix E: PIP/PAP Mode Combinations MAIN TV DTV/ USB TV 8 8 (RGB) 9 DTV/ USB 8 9 8 9 (RGB) 9 Scart2 8 9 8 9 (RGB) Scart2S 8 9 (RGB) FAV 8 9 HDMI1 9 HDMI2 Scart1 Scart2 HDMI1 HDMI2 YPbPr PCVGA Scart2S FAV 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 9 9 (RGB) (RGB) (RGB) 9 9 9 9 8 8 8 9 9 9 9 9 8 8 8 9 9 9 9 (RGB) 9 8 8 8 9 9 9 9 9 9 9 9 9 8 8 9 9 9 9 9 9 9 9 8 8 9 9 YPbPr 9 9 9 9 9 9 9 9 8 9 PCVGA 9 9 9 9 9
Appendix D: Supported File Formats for USB Mode Media Music Remarks Format File Extension Video Audio (Maximum resolution/Bit rate etc.) - - PCM MPEG 1/2 Sample Rate: 8K ~ 48KHz .mp3 - Layer 1/ 2/ Sample Rate: 8K ~ 48KHz, Bit Rate: 32K~320Kbps 3 (MP3) .wma .jpg Photo Baseline JPEG Progressive JPEG .gif .
Specifications TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1 Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile for UK Frequency range: 474-850 MHz for UK models Digital Reception 170-862 MHz for EU models Transmission standard: DVB-T. MPEG-2 Demodulation: COFDM with 2K/8K FFT mode FEC: all DVB modes Video: MP@ML, PAL, 4:3/16:9 Audio: MPEG Layer I&II 32/44.
UK Guarantee Your Guarantee of Excellence Thank you for purchasing this Hitachi Television.
QUICK GUIDE L32HP03U IMPORTANT - If placing TV into cabinet or alcove, ensure there is at least a 100mm (10cm) gap to the sides, rear and top of theT V.T his is to allow for adequate ventilation during operation. Please read the main Users Guide for more safety information before installation. inserttheba tteriesintoy ourhandset Rear view eitherconnecttheaerialstr aighttoy ourTV ... 5Vdc60mA Aerial(RF) Lead wall socket Aerial(RF)Socket ...orconnecttheaerialthr oughaV CR...
...orthr oughaHDMIandYP BPRpr oducts(D VD-RW) TFT-LCDTV Aerial(RF)Socket 5Vdc60mA •ScartLeadto AV-1onTV . (RF)connector leadDevicetoTV COMPONENT ANTENNA wall socket Aerial(RF) Lead Y PB ANT.IN PR HDMIOUT DVDRECORDER •HighDefinition YourLCDT elevisioniscapableofdisplayingHighDefinitionpicturesfromdevicessuchasaHighDefinitionSatelliteReceiverorDVD Device.ThesedevicesmustbeconnectedviatheHDMIsocketorComponentSocket. ...orthr oughaV CRandsa tellitedecoder .
connecttheTVplugtothemainssoc European plug UK plug insert plug... ket ...and switch on insert plug... switchy ourTVon bysettingtheon/of f buttontoposition|. SIDE VIEW NB: Whenthesetisfirstswitchedon,thesetwillbeinstandby andtheindicator onthefrontofthesetwillilluminatered . PressOperate/Standbyor channel updown(P-,P+)ornumericbuttons(1,2,3,...)tooperate.
startA.P .S.(A utoPr ogrammingSystem) 1 When the TV is turned on for the first time, the menu for the language selection appears on the screen. The messag e “Welcome please select your language!” is written in all language options sequentially in the menu on the screen. By pressing or buttons highlight the language you want to set and press OK. After then, First time Installation Menu will appear on screen. By pressing |o r }b uttons,s elect country it emy ouw antt o seta ndp ress OKb utton.
Hitachi Ltd. Consumer Business Group Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, Tokyo 100-0004 Japan HITACHI EUROPE LTD. Consumer Affairs Department PO Box 3007 Maidenhead Berkshire SL6 8ZE UNITED KINGDOM Tel: 0870 405 4405 Email: consumer.mail@hitachi-eu.com HITACHI EUROPE S.A. 364, Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 210 6837200 Fax: 210 6835694 Email: dmgservice.gr@hitachi-eu.
