5
READ THIS FIRST Trademark Information Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation. Pentium® is a registered trademark of Intel Corporation. Macintosh is a trademark of Apple Inc. SD™ is a trademark. Other names and products may be trademarks or registered trademarks of their respective owners. Product Information Product design and specifications are subject to change without notice.
SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. ************** DO read the operating instructions before you attempt to use the equipment.
SAFETY INSTRUCTIONS Read and understand all Warnings and Cautions before using this product. Warnings If foreign objects or water have entered the photo frame, turn the power off and unplug the power cord. Continued use might cause fire or electric shock. Consult the store of purchase. If the photo frame has fallen or its case has been damaged, turn the power off and unplug the power cord. Continued use might cause fire or electric shock. Consult the store of purchase.
Cautions Use only the AC adapter included with the photo frame. Using any other power adapter might cause damage or malfunction. Do not subject the LCD monitor to impact. This might damage the glass on the screen or cause the internal fluid to leak. If the internal fluid enters your eyes or comes into contact with your body or clothes, rinse with fresh water. If the internal fluid has entered your eyes, consult a physician to receive treatment. A photo frame is a precision instrument.
CONTENTS INTRODUCTION ................................................................................................6 Overview .....................................................................................................................6 Package Contents .......................................................................................................6 GETTING TO KNOW YOUR PHOTO FRAME ..................................................7 Front View .............................................
INTRODUCTION Overview Congratulations on your purchase of this new digital photo frame/ With 7” TFT-LCD display and simple operation, it is easy and fun to share your digital memories. The key features of the photo frame are as follows: Display digital photos (JPEG) stored on internal memory (10MB) or on inserted memory card. Compatible memory cards include SD/SDHC card (Secure Digital) and MMC card (MultiMedia). Auto slide show with multiple transition effects and selected time interval.
GETTING TO KNOW YOUR PHOTO FRAME Front View 1. LCD screen 2. ON/OFF Power button 3. X Right button 4. W Left button 5. S Up button 6. T Down button 7. Zoom button 8. SLIDE Slide button 9. EXIT Exit button 10. OK OK button 11. Frame stand 12. AC power input 13. Mini USB jack 14. Memory card slot Rear View Button Operation Button Function descriptions ON/OFF button Press to turn the photo frame on or off. W button Press to select the left item or return to the previous menu/directory.
GETTING STARTED Turning on the Photo Frame 1. Adjust the frame stand and make sure the photo frame is placed stably near power source. 2. Connect the photo frame with the supplied AC adapter and plug the other end to a power outlet. 3. Insert a compatible memory card with photo files 09:00AM to the memory card slot. To remove the memory card, push lightly on the edge of the card and it will eject. Calendar Setup File 4. Press the ON/OFF button to turn the photo frame on.
BASIC OPERATION Viewing Photos (Photo Mode) Single Photo Display You can view single photo display on screen. 1. From main menu, select [Photo] and then press the OK button to enter photo mode. 2. Presseorfbutton to display previous or next photo. The photo menu access indicator will appear on the bottom-right corner for 3 seconds. Press button continuously to enlarge a photo by up to 4X. Use W/X/S/T buttons to move the enlarged area around. Press EXIT button to return to normal size display.
Rotate This sets the photo to rotate clockwise to the desired degree/! When you rotate a photo, you can display the rotation in the current photo mode or slide show but you cannot save a rotated photo. In other words, the photo reverts to original display once you exit from current photo mode or slide show and enter any other mode. * No Change / 90 / 180 / 270 File Info. This sets the photo to display file information such as resolution, file size and file name in photo single display mode.
Viewing Current Date and Time (Calendar Mode) The photo frame can be used as a calendar as well as a clock. When not playing a slide show, you can set the photo frame to calendar mode, showing calendar, clock, current date and time. 1. Set correct current date and time first. Refer to “Setting the Date and Time”. 2.
Setting up the Photo Frame (Setup Mode) From the setup menu, you can set the photo frame’s operating environment or your preferred setting. 1. From main menu, select [Setup] and then press Setup the OK button to enter setup menu. Photo Thumbnail Digest Digest Style Slide Show 2. Select the desired option item and then press Brightness Aspect Ratio the OK or X button to enter its respective Date/Time menu. Language Startup Press W button to return to the previous menu. 3.
Brightness This sets the brightness of the screen display. *1/2/3/4/5/6/7 Date/Time This sets the current date and time and activates the auto timer function. Current Date * Refer to “Setting the Date and Time” for further information. Current Time * Refer to “Setting the Date and Time” for further information. Auto Timer This sets the auto timer function so that the photo frame can turn on or off at the set time.
CONNECTING TO A COMPUTER You can connect the photo frame to a computer with the supplied USB cable. When connecting to a computer, the photo frame works as a mass storage device. With the USB connection, you can add, delete or edit files stored on the internal memory or memory card. System Requirements Windows Macintosh Pentium 166 MHz or higher Windows 2000/XP/Vista 128MB RAM 128MB hard disk space CD-ROM drive Available USB port PowerPC G3/G4/G5 OS 9.
SPECIFICATIONS Item Description LCD monitor 7.0” color TFT LCD LCD resolution 480 x 234 pixels Screen ratio 16:9 Memory card supported SD/SDHC, MMC card Internal memory 10MB flash USB interface USB 2.0 mini jack File format supported JPEG Power AC adapter (5V, 2A) Dimensions Approx. 201 x 130 x 22 mm Weight Approx. 335g!(without AC adapter and memory card) * Design and specifications are subject to change without notice.
Symptom Cause Solutions / Corrective Actions “No Files” is displayed when photo or file mode is selected or when SLIDE button is pressed. Memory card is not inserted correctly and no file is stored on internal memory. Insert the memory card in correct direction according to the indicator by the card slot. No photo file is stored on inter- Copy photo files to the internal nal memory or inserted memory memory or insert a memory card with photo files. card.
5
