HDC-530E 5 1.
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
READ THIS FIRST Trademark Information Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation. Pentium® is a registered trademark of Intel Corporation. Macintosh is a trademark of Apple Computer, Inc. SDTM is a trademark. Photo Explorer and Photo Express are trademarks. Other names and products may be trademarks or registered trademarks of their respective owners. Product Information Product design and specifications are subject to change without notice.
SAFETY INSTRUCTIONS Read and understand all Warnings and Cautions before using this product. Warnings If foreign objects or water have entered the camera, turn the power OFF and remove the batteries and the AC power adapter. Continued use in this state might cause fire or electric shock. Consult the store of purchase. If the camera has fallen or its case has been damaged, turn the power OFF and remove the batteries and the AC power adapter. Continued use in this state might cause fire or electric shock.
Cautions Insert the batteries paying careful attention to the polarity (+ or –) of the terminals. Inserting the batteries with its polarities inverted might cause fire and injury, or damage to the surrounding areas due to the battery rupturing or leaking. Do not fire the flash close to anyone’s eyes. This might cause damage to the person’s eyesight. Do not subject the LCD monitor to impact. This might damage the glass on the screen or cause the internal fluid to leak.
Notes on Battery Usage When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: Different battery types and surrounding temperatures may affect the battery performance. Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and reduce camera performance. This low temperature will also influence Alkaline battery performance, therefore Ni-MH rechargeable battery is highly recommended.
CONTENTS INTRODUCTION ................................................ 8 PHOTOGRAPHY MODE................................... 23 Package Contents............................................ 9 Shooting Images - The Basics..........................23 Setting Image Resolution and Quality ................ 24 Using the Zoom Function................................... 25 Using the Flash............................................... 26 Using the Self-Timer.........................................
PLAYBACK MODE - THE BASICS..................... 36 EDITING SOFTWARE INSTALLATION..............56 Viewing Images ............................................... 36 Magnifying Images .......................................... 37 Thumbnail Display .......................................... 38 Slideshow Display ........................................... 39 Resizing an Image ........................................... 40 Installing Photo Explorer....................................
INTRODUCTION Thank you for purchasing the new digital camera! Equipped with a 5.0 Megapixels CCD sensor, your camera delivers good quality, 2560 x 1920 resolution images. Other features provided by the camera include the following: 5.0 Megapixels A high-resolution CCD sensor provides 5.0 megapixels for good quality of images. Auto flash An auto flash sensor automatically detects the shooting (lightening) conditions and determines whether the flash should be used. 1.
Package Contents Carefully unpack your kit box and ensure that you have the following items. In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer. Common Product Components: Digital Camera User’s Manual USB Cable Software CD-ROM AV Cable Camera Strap Camera Pouch Common (Optional) Accessories: SD memory card AC power adapter Batteries Battery Charger Accessories and components may vary by retailer.
GETTING TO KNOW YOUR CAMERA Front View 1 5 6 7 8 2 3 9 10 4 EN-10 1. Shutter button 6. Mode dial 2. Flash 7. Self-timer LED 3. Microphone 8. Viewfinder window 4. Lens 9. PC (USB) / AV Out terminal 5. Power button 10.
Rear View 7 1 8 2 9 3 4 10 5 11 12 6 13 14 1. Viewfinder 8. 2. Rec-play button 9. LCD monitor / 3. Menu button 10. S Arrow button (Up) 4. Delete button 11. X Arrow button (Right) 5. OK / (Display) button Self-timer button 6. Tripod socket 12. T 7. 13. W / Zoom out (wide-angle) button Thumbnail button Zoom in (telephoto) button Arrow button (Down) Arrow button (Left) Flash button 14.
Mode Dial You can select from seven shooting modes and setup mode according to shooting conditions to achieve the desired effect. 5 1 2 6 3 7 4 8 9 1. 2. 3. 4. 5. P A Mode Power button Program Auto Video Portrait 6. Landscape 7. 8. Sports Night 9. Setup EN-12 Description Press to turn on/off the power. Select this mode to permit the shutter speed and aperture to be set manually. Select this mode to adjust point-and-shoot action. Select this mode to record video clips.
LCD Monitor Information 1 Camera Mode P 2 3 4 5 3M 8 SD 6 7 14 13 8 12 X1 9 1. Mode indication [ A ] Auto Mode 1.5x 2004.09.17 [ ] Setup Mode 11 10 [ ] Video Mode [ ] Landscape Mode [ ] Status of internal memory [ P ] Program Mode [ ] Status of SD memory card SD [ ] Sports Mode [ ] Portrait Mode 6. Remaining battery status [ ] Night Mode ] Full battery power [ 2. Image quality [ ] Medium battery power [ ] FINE [ ] Low battery power [ ] NORMAL [ ] No battery power [ ] ECONOMY 7.
Video Mode 2 1. 2. 3. 4. 5. 1 Video mode Recordable movie time available SD memory card indicator (if present) Battery power indicator Focus area 3 00:33 4 SD 5 2 Image Playback 1 1. 2. 3. 4. 4 Playback mode SD memory card indicator (if present) Battery power indicator Playback information 3 SD 100-0001 SIZE EV. 01. 04. '04 1280X960 +1.5 05:22 1 Video Playback 1. 2. 3. 4. 5. 6.
PREPARING THE CAMERA Installing the Batteries (Optional Accessory) You can use 2 AA size batteries to power the camera. Make sure that the power of the digital camera is off before inserting or removing the batteries. 1. Make sure the camera is turned off. 2. Open the battery cover. 3. Insert the batteries in the correct orientation as shown in the illustration. 4. Close the battery cover.
Using the AC Power Adapter (Optional Accessory) Use of the AC power adapter is recommended if you intend to use the LCD monitor for a long time or connect the camera to a PC. 1. Make sure your camera is turned off. 2. Connect one end of the AC power adapter to the camera jack labeled "DC IN 3.0V". 3. Connect the other end to an electrical outlet. Make sure to use only the AC power adapter specified for the camera. Damage caused by the use of an incorrect adapter is not covered under the warranty.
Inserting and Removing an SD Memory Card (Optional Accessory) The digital camera comes with 12MB of internal memory, allowing you to store captured still images or video clips in the digital camera. Moreover, you can also expand the memory capacity by using an optional SD (Secure Digital) memory card so that you can store more files. 1. Make sure your camera is turned off before inserting or removing a memory card. 2. Open the SD memory card cover. 3.
Attaching the Camera Strap Attach the strap as shown in the illustration. 1 LED Indicators Indicator LED indicator LED indicator LED indicator Self-timer indicator EN-18 State Solid red Solid green Blinking green Blinking red Blinking red Description/Activity The digital camera is powering up. The digital camera is ready to record images (or movies). USB communication/transfer in progress Charging the flash. The self-timer function is activated.
GETTING STARTED Turning the Power On/Off Press the button until the digital camera turns on. To turn the power off, press the button again. Choosing the Screen Language When the camera is turned on for the first time, a language-selection screen will be displayed in the monitor. Follow the steps below to choose the desired language. 1. Rotate the mode dial to and turn your camera on by pressing button. the 2. Press X to select the [CUSTOM] menu. 3. Use T to select [LANGUAGE], then press the button. 4.
Setting the Date and Time Follow the steps below to set the date display style, current date and time. 1. Rotate the mode dial to and turn your camera on by pressing the button. 2. Press X to select the [CUSTOM] menu. 3. Use T to select [DATE & TIME], then press the button. You may press W or X to switch the date types. 4. Press the W / X buttons to select Year, Month, Day and Time fields. To increase a value, press the S button. To decrease a value, slide the zoom lever to the T button.
Formatting an SD Memory Card or Internal Memory The term “Formatting” means preparing an “SD Memory Card” to record images; this process is also called “initialization”. This utility formats the internal memory (or memory card) and erases all stored images and data. and turn your camera on by pressing 1. Rotate the mode dial to button. the The [BASIC] menu is displayed. 2. Use T to select [FORMAT], then press the button. button to confirm. 3.
Using the LCD Monitor Your camera is equipped with a 1.8" full color TFT LCD monitor to help you compose images, replay recorded images/video clips or adjust menu settings. The mode icons, text and numbers displayed on the monitor may very according to the current settings. 1. 2. 3. 4. , , , Rotate the mode dial to A , P , Press the button to turn on the power. Compose your scene on the LCD monitor. Press the shutter button. or . The LCD monitor darkens in strong sunlight or bright light.
PHOTOGRAPHY MODE Shooting Images - The Basics 1. Rotate the mode dial to A , P , , , or and turn your camera on by pressing the button. 2. Compose the image on the monitor screen so that the main subject is within the focus frame. 3. Press the shutter button down half way to focus the image. When you press the shutter button down half way, the camera’s Auto Focus feature automatically focuses the image and exposure. 4. Press the shutter button the rest of the way down to capture the image.
Setting Image Resolution and Quality As you get to know the digital camera, you can set the image resolution (number of vertical and horizontal pixels) and image quality (compression ratio) based on the types of images you want to shoot. These settings affect the number of images that can be stored in memory, or on a memory card. Higher resolution and higher quality images provide finer detail but cause the images’ file size to be larger.
Using the Zoom Function This camera is equipped with 3x optical zoom. The lens moves during the optical zoom photography, allowing you to capture telephoto and wide-angle shots. By using the optical zoom function; images appear closer by pressing the button, or smaller away by pressing the button. Moreover, you can further enlarge the subjects with 4x digital zoom by pressing continuously the button. It is activated after your camera reaches its maximum optical zoom factor (3x).
Using the Flash The flash is designed to function automatically when lighting conditions warrant the use of flash. You can take an image using a desired flash mode to suit your circumstances. 1. Rotate the mode dial to A , P , , , button to turn on the power. 2. Press the or . 3. Toggle W / until your desired flash mode appears on the LCD monitor. 4. Compose your scene and press the shutter button. The camera has four flash modes:Auto Flash (default), Red Eye, Forced Flash and No Flash.
Using the Self-Timer The self-timer can be used in situations such as group shots. When using this option, you should either mount the camera on a tripod (recommended) or rest it on a flat, level surface. 1. Secure the camera to a tripod or place it on a stable surface. 2. Rotate the mode dial to A , P , 3. Press the , , or . button to turn on the power. 4. Toggle X / until your desired self-timer mode appears on the LCD monitor. OFF 2 10 10+2 [ No Indication] 5.
Adjusting the Exposure (EV Compensation) You can manually adjust the exposure determined by the digital camera. Use this mode when the proper exposure cannot be obtained, for example, when the contrast (different between light and dark) between the subject and the background is extremely large. The EV compensation value can be set in the range from –2.0EV to +2.0EV. , , or . Rotate the mode dial to P , Press the button to turn on the power. , then use X to select the [AE/AWB] menu.
Setting White Balance This feature lets you make adjustments to compensate for different lighting types according to your shooting conditions. 1. 2. 3. 4. 5. Rotate the mode dial to P , , , or . button to turn on the power. Press the Press , then toggle X to select the [AE/AWB] menu. Use T to select [W. BALANCE], then press the button. Use S or T to select the desired setting, then press the button to confirm. 6. To exit from the menu, press the button. PICTURE FUNCTION AE/AWB EXPOSURE +0.7 W.
USING THE MODE DIAL Auto Mode A (Auto) mode is the simplest way which allows you to take still pictures without having to set special functions or manual adjustments. The camera sets the optimal focusing and exposure. 1. Rotate the mode dial to A mode and turn your camera on by pressing the button. 2. Compose your subject within the focus frame. 3. Press the shutter button down halfway to focus the image.
Portrait Mode Select this mode to make people stand out with the background out-of-focus. mode and turn your camera on by 1. Rotate the mode dial to pressing the button. 2. Compose your subject within the focus frame. 3. Press the shutter button to capture the image. 3M 8 SD X1 1.5x 2004.09.17 Landscape Mode This mode allows you to take photographs of distant scenery or landscapes. mode and turn your camera on by 1. Rotate the mode dial to pressing the button. 2.
Sports Mode This mode allows you to shoot fast moving objects. mode and turn your camera on by 1. Rotate the mode dial to pressing the button. 2. Compose your subject within the focus frame. 3. Press the shutter button to capture the image. 3M 8 SD X1 1.5x 2004.09.17 Night Mode This mode allows you to take photographs of people against a dusk or night-time background. 1. Rotate the mode dial to mode and turn your camera on by pressing the button. 2. Compose your subject within the focus frame. 3.
ADVANCED SHOOTING Burst This mode is used for continuous shooting. Pictures are taken continuously while the shutter release button is pressed. 1. Rotate the mode dial to P , , , or and turn your camera on by pressing the button. , then use X to select the [FUNCTION] menu. 2. Press 3. Use T to select [CAPTURE MODE], then press the button. 4. Use S or T to select [BURST], then press the button. button. 5. To exit from the menu, press the The indicator is displayed on the monitor screen. 6.
Auto Exposure Bracketing (AEB) In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter button once. AEB settings can be combined with exposure compensation settings to extend the adjustment range. , , or and turn your 1. Rotate the mode dial to P , button. camera on by pressing the 2. Press , then use X to select the [FUNCTION] menu. 3. Use T to select [CAPTURE MODE], then press the button. button. 4.
Selecting the Metering Mode You can select the metering mode that sets which part of the subject to measure to determine the exposure. 1. Rotate the mode dial to P , , , or camera on by pressing the button. , then use X to select the [FUNCTION] 2. Press 3. Use T to select [METERING], then press the 4. Use S or T to select the desired metering mode, button. and turn your PICTURE FUNCTION menu. button.
PLAYBACK MODE - THE BASICS Viewing Images You can display the still images you have just captured at a time. 1. Press the button to turn on the camera. (Playback) button. 2. Press the The last recorded image appears on the LCD monitor. 3. Use W or X to select the desired images. To view the previous image, press the W button. To view the next image, press the X button. SD 100-0001 SIZE EV. 01. 04. '04 1280X960 +1.
Magnifying Images While reviewing your images, you may enlarge a selected portion of an image. This magnification allows you to view fine details. The zoom factor displayed on the screen shows the current magnification ratio. T T T 1. Press the (Playback) button. The last recorded image appears on the LCD monitor. To view the previous image, press the W button. To view the next image, press the X button. 2. Adjust the zoom ration by using the Zoom / button.
Thumbnail Display This function allows you to view 9 thumbnail images on the LCD monitor simultaneously so you may search for a particular image. 1. Press the (Playback) button. The last recorded image appears on the LCD monitor. / button once. 2. Press the Nine thumbnail images are displayed simultaneously. For recorded video clips, the video mode icon will be displayed. 3. Use the S / T / W / X button to move the cursor to select the image to be displayed at regular size.
Slideshow Display The slide show function enables you to play your images back automatically in sequential order. This is very useful and entertaining feature for reviewing recorded images and for presentations. 1. Press the (Playback) button. The last recorded image appears on the LCD monitor. , then use T to select [SLIDE SHOW] and press the 2. Press button. 3. Use S or T to set the playback interval, then press the button. The slide show starts.
Resizing an Image You can change the image size of a captured image to one of the following sizes: 2560 x 1920 pixel, 2048 x 1536 pixel, 1280 x 960 pixel and 640 x 480 pixel. 1. Press the (Playback) button. The last recorded image appears on the LCD monitor. 2. In (Playback) mode, use W or X to select the desired images. To view the previous image, press the W button. To view the next image, press the X button. 3.
VIDEO MODE Recording Video Clips This mode allows you to record video clips with sound via built-in microphone. 1. Rotate the mode dial to mode and turn your camera on by button. pressing the 2. Press the shutter button to start recording. 3. To stop recording, press the shutter button again. 00:49 SD [ ] The zoom function of optical zoom (3x) can be activated before you start to record video clips. Pressing the button switches the LCD monitor display mode.
Playing Back Video Clips You can play back recorded video clips. A guide to operation appears on the LCD monitor during the video playback. 1. Press the (Playback) button. 2. Use W or X to go through the images until the video clip you want to play back is displayed. To view the previous image, press the W button. To view the next image, press the X button. button to start playing back the video clips. 3. Press the To pause or resume video playback, press the button again. SD 100-0001 SIZE EV. 01.
PLAYBACK MODE – ADVANCED FEATURES Playing Back Still Images/Video Clips on TV You can also playback your images on a TV screen. Before connecting to any device, make sure to select NTSC/PAL system to match the video output system of the video equipment you are going to connect to the digital camera, then turn all connected devices off. 1. Connect one end of the A/V cable to the A/V terminal of the digital camera. 2. Connect the other end to the A/V input socket of the TV set. 3.
Deleting Images/Video Clips Use this function to delete one or all images/video clips stored in the internal memory or memory card. Please note that the deleted images or video clips cannot be recovered. Exercise caution before deleting a file. To delete the latest single image/video clip 1. Press the button to turn on the power. 2. Press . When the delete message appears, use S or T to button to delete the last image select [YES], then press the or video clip.
Protecting Images/Video Clips Set the data to read-only to prevent images from being erased by mistake. 1. Press the (Playback) button. The last recorded image appears on the LCD monitor. 2. In (Playback) mode, use W or X to select the desired images. To view the previous image, press the W button. To view the next image, press the X button. PLAYBACK DELETE SLIDE SHOW SLIDE SHOW PROTECT QUALITY CHANGE 3/7 3. Press , then use T to select [PROTECT] and press the button. 4.
Setting the DPOF DPOF (Digital Print Order Format) allows you to embed printing information on your memory card. By using DPOF, you can select an image to be printed and then specify how many prints or which image you would like. Take your memory card to a DPOF enabled printer that accepts memory cards. The DPOF/ card-compatible printer will read the embedded information on the memory card and print your images as specified. To configure print settings for a single image / all images.
Step Figure Procedure ONE IMAGE DATE 0 T S QUANTITY ON Use S or T to select by your preference, then press the [QUANTITY]: RETURN [DATE]: 4 DATE ON S QUANTITY 0 T ONE IMAGE [RETURN]: RETURN SD button. Allows you to select image quantity (0~10). Use W or X to set the image quantity. The date of recording can be printed directly on the images. Press the button to choose [YES] or [NO] with W or X . To exit the mark function, use S or T to select [RETURN], then press the button.
Connecting to a PictBridge Compliant Printer (Optional Function) Even if you do not have a computer, you can connect the camera directly to a printer that supports PictBridge to perform image selection and printing using the camera monitor screen and controls. DPOF support also lets you specify which images you want to print and how many copies of each should be printed. Connecting the camera to the printer 1. Rotate the mode dial to and turn your camera on by pressing USB the button. 2.
Step Procedure Figure PRINT PAPER 2 SIZE STANDARD BORDERLESS STANDARD SET: SELECT: OK Use W or X to select the image you want to print, then press T to proceed more detailed settings. * The [PRINT INFO] screen is displayed. 3 SELECT : PRINT : CANCEL : MORE : OK Use S or T to select by your preference, then press the PRINT INFO 10 4 DATE WITH FILE NAME WITH [ CANCEL SELECT: Use S or T to access in the selection of paper setting, then press the button to confirm.
Step Figure Procedure Use S or T to select [PRINT], then press the PRINT PRINT 6 button to confirm. * The TRANSFERRING screen is displayed. CANCEL SET: SELECT: OK This starts printing and displays the message “TRANSFERRING” on the monitor screen.The message will disappear after the printing finished. TRANSFERRING CANCEL : 7 * To cancel printing: PRINT CONTINUE Pressing the button during print data transfer displays the screen for selecting whether to [CONTINUE] or [CANCEL] printing.
Step Procedure Figure PRINT PAPER SIZE STANDARD BORDERLESS STANDARD 2 SET: SELECT: OK Use S or T to access in the selection of paper setting, then press the button to print. [SIZE]: You may select the desired item depending on the type of printer being used. [BORDERLESS]: You may select the desired item depending on the type of printer being used. Use S or T to select [PRINT], then press the PRINT button to confirm. PRINT * The TRANSFERRING screen is displayed.
TRANSFERRING FILES FROM YOUR DIGITAL CAMERA TO COMPUTER After using USB cable to establish a USB connection between the camera and your computer, you can use your computer to share recorded images or video clips with your family or friends via e-mail or post them on the Web. In order to do this, you must install the USB driver onto your computer first. Note that before you begin to install the software, you need to check your system according to the table as shown below.
Step 1: Install the USB driver Installation on Windows 98 & 98SE The USB driver on the supplied CD-ROM is exclusively for Windows 98 and 98SE. Windows 2000/ME/XP users need not install the USB driver. 1. Insert the enclosed CD-ROM into your CD-ROM drive. 2. When the welcome screen appears, click “INSTALL USB DRIVER “. Follow the on-screen instructions to complete the installation. 3. After the USB driver has been installed, restart your computer. Installation on MAC OS 9.0 For Mac OS 9.
Step 2: Connect the digital camera to your computer 1. Rotate the mode dial to and turn your camera on by pressing the button. 2. Press X to select the [CUSTOM] menu, then use T to select [USB]. 3. Use T to select [PC], then press the button. 4. Connect one end of the USB cable to an available USB port on your computer. 5. There will be a new “Removable Disk” icon detected in “My Computer”, in which contains your recorded images or video clips.
Step 3: Download images or video clips When the digital camera is turned on and connected to your computer, it is considered to be a disk drive, just like a floppy disk or CD. You can download (transfer) images by copying them from the “Removable disk” (“untitled” or “unlabeled” disk on a Macintosh) to your computer hard drive. Windows Open the “removable disk” and double click on the DCIM / DSCIM folder to open it to find more folders. Your images are inside these folder(s).
EDITING SOFTWARE INSTALLATION Installing Photo Explorer Ulead ® Photo Explorer provides a simple and efficient way to transfer, browse, modify and distribute digital media. Acquire photos, video or sound clips from various digital device types and easily browse or add personal descriptions; make timely modifications; or distribute the media through the medium of your choice: E-mail, Print, Slideshow Presentations.
Installing Photo Express Ulead® Photo Express is complete photo project software for digital images. The step-by-step workflow, visual program interface, and in-program help assist users in creating exciting photo projects. Acquire digital photos effortlessly from digital cameras or scanners. Organize them conveniently with the Visual Browse mode. Use hundreds of ready-to-use templates such as albums, cards, posters, slideshows, and more.
USING THE DIGITAL CAMERA AS A PC CAMERA Your digital camera can act as a PC camera, which allows you to videoconference with business associates, or have a real-time conversation with friends or family. To use the digital camera for videoconferencing, your computer system must include the items as below: Microphone Sound card Speakers or headphones Network or Internet connection Video conferencing (or video editing) software is not included with the digital camera.
Step 2: Connect the digital camera to your computer 1. Rotate the mode dial to and turn your camera on by pressing the button. 2. Press X to select the [CUSTOM] menu, then use T to select [USB]. 3. Use S or T to select [PC CAM.], then press the button. 4. Connect one end of the USB cable to an available USB port on your computer. 5. Position the digital camera steadily on top of your computer monitor or use a tripod. USB PC PRINT PC CAM.
MENU OPTIONS Camera Menu This menu is for the basic settings to be used when capturing still images. Q IMAGE SIZE 5M QUALITY [ ] FOCUS PICTURE FUNCTION PICTURE FUNCTION AUTO IMAGE SIZE Q AUTO QUALITY SHARPNESS PICTURE FUNCTION AE/AWB AUTO 5M LOW X1 1/4 +0.7 W.BALANCE ISO COLOR X1 EXPOSURE 1/5 1/3 100 1/3 , , or and turn your camera on. 1. Rotate the mode dial to A , P , 2. Press , then use W or X to select the [PICTURE] / [FUNCTION] / [AE/AWB] menu.
Item Functional Description FOCUS You can take images with the distance to the subject set by auto focus, macro or infinity. * AUTO * MACRO * INFINITY CAPTURE Sets the recording method at the time of taking pictures. MODE * In P , PICTURE , X1 SINGLE * BURST * AEB , or Item Mode Functional Description IMAGE SIZE Refer to “Camera Menu - In A (Auto) Mode” in LIST OF MENU OPTIONS. QUALITY Refer to “Camera Menu - In A (Auto) Mode” in LIST OF MENU OPTIONS.
PICTURE Item Functional Description COLOR Sets the color of the image that will be captured. SATURATION FUNCTION EN-62 Item FOCUS * FULL COLOR * BLACK & WHITE * SEPIA To capture an image, your camera offers you three different degrees of color to match with your preference. Your images will demonstrate different impression by selecting different degrees of color. This is called “Saturation”.
AE/AWB Item Functional Description EXPOSURE Sets to obtain the correct exposure when the subject is much brighter or darker than the background. The EV compensation value can be set in the range from –2.0EV to +2.0EV. EV W. BALANCE WB ISO ISO Sets the white balance photographing under a variety of lighting conditions and permits photographs to be taken that approach the conditions that are seen by the human eye.
Video Menu This menu is for the basic settings to be used when recording video clips. VIDEO R G B COLOR FULL COLOR COLOR BLACK & WHITE SEPIA SET : EXIT : 1/1 SET : 1. Rotate the mode dial to 2. Press EXIT : 1/3 mode and turn your camera on. , then use T to select the [COLOR]. 3. To exit from the playback menu, press the button. Item Functional Description COLOR REFER TO “Camer Menu-In In P , EN-64 , , or Mode” of MENU OPTIONS.
Playback Menu In the (Playback) menu, set which settings are to be used for playback. PLAYBACK R RESIZE DPOF DPOF COPY COPY TO CARD SET : EXIT : 5/7 1. Press the (Playback) button. The last recorded image appears on the LCD monitor. 2. Press , then use S or T to select the desired setting and press the 3. To exit from the playback menu, press the button. button. Item Functional Description DELETE Delete one or all images you captured.
Item Functional Description QUALITY Change to set the desired quality (compression rate) at which the image is captured. CHANGE * FINE * NORMAL * ECONOMY RESIZE R DPOF DPOF COPY TO CARD COPY EN-66 Changes the size of a recorded image. * 2560x1920 * 2048x1536 * 1280x960 * 640x480 Allows you to select the desired pictures to be printed and set the number of prints and date displayed in DPOF format.
Setup Menu This feature allows you to set up the default settings by preference for using your camera. POWER OFF 3 MIN. DIGITAL ZOOM DATE IMPRINT QUICK VIEW SET : 1. 2. 3. 4. ON BASIC Y/M/D DATE & TIME NTSC PAL TV QUICK VIEW BASIC CUSTOM LANGUAGE FORMAT ON SET TO DEFAULT CUSTOM RESET NUMBER Y/M/D T 1 S BASIC LOUDER CUSTOM USB PC NTSC ENGLISH LCD BRIGHTNESS OFF 5/8 SET : 1/5 SET : 5/5 (Setup) mode and turn your camera on.
Item SET TO DEFAULT D RESET NUMBER 1 DATE IMPRINT DATE Functional Description Returns all basic settings to the digital camera’s default settings. The time setting will not be reset. * YES / NO Set whether or not to reset the file number when you take photographs. This creates a new folder. The captured images are recorded to the newly created folder from number 0001. If you want to reset the file number, be sure that no images are recorded in the internal memory or the SD memory card.
CUSTOM settings Item Functional Description DATE & TIME This sets the date and the time. Refer to section in this manual titled “Setting the Date and Time” for further details. * Y/M/D * D/M/Y * M/D/Y Y/M/D TV NTSC PAL Sets video output system of the video equipment that you are going to connect to the camera. * PAL / NTSC LANGUAGE Sets the language that is displayed on the LCD monitor. Refer to section in this manual titled “Choosing the Screen Language” for further details.
CONNECTING THE DIGITAL CAMERA TO OTHER DEVICES EN-70
SPECIFICATIONS Item Image Sensor Effective pixels Image size Description CCD 5.0 Mega pixels Still image: 2560 x 1920, 2048 x 1536, 1280 x 960, 640 x 480 Video clip: 320 x 240 Image quality Still image: Fine, Normal, Economy Movie image: Economy Recording media 12MB internal memory SD memory card (Optional, up to 512 MB) File format Motion JPEG (AVI); Picture Bridge support (Optional Function); PC-CAM support (QVGA around 20 f/s) Lens F-no.: Wide: 2.8 / Tele: 4.8 Focal length: 5.4mm-16.
APPENDIX Troubleshooting Guide Symptom Possible causes Power does not turn on. * * * * Camera suddenly powers down. * The function of POWER OFF in mode has been activated. * The battery has run out. Image is not captured when the shutter button is pressed. * The camera is in * Memory is full. Flash does not fire. * NO FLASH is selected in flash mode. The battery has run out. The battery is not oriented correctly. The battery cover is not closed properly.
Product Guarantee This product is guaranteed against manufacturing defects for a period of 1 Year This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modifications or alterations, or has been the subject of commercial use In the event of a problem with the product within the guarantee period please return it to your nearest store If the item is shown to have had an inherent defect present
