User Manual HandyTone-486 Analog Telephone Adaptor For Firmware Version 1.0.8.32 Grandstream Networks, Inc. www.grandstream.com VoIPon www.voipon.co.uk sales@voipon.co.
HandyTone-486 User Manual Grandstream Networks, Inc. Table of Contents 1 WELCOME..................................................................................................................... 4 2 INSTALLATION ............................................................................................................ 5 3 WHAT IS INCLUDED IN THE PACKAGE ............................................................... 7 3.1 3.2 4 SAFETY COMPLIANCES ................................................
HandyTone-486 User Manual Grandstream Networks, Inc. 6.2.4 Saving the Configuration Changes.................................................................... 35 6.2.5 Rebooting the HandyTone-486 from remote ..................................................... 36 6.3 CONFIGURATION THROUGH A CENTRAL SERVER ....................................................... 36 7 SOFTWARE UPGRADE ............................................................................................. 37 7.1 7.2 7.3 7.
HandyTone-486 User Manual Grandstream Networks, Inc. 1 Welcome Congratulations on becoming an owner of HandyTone-486. You made an excellent choice and we hope you will enjoy all its capabilities. Grandstream's award-wining HandyTone-486 is an all-in-one VoIP integrated access device that features superb audio quality, rich functionalities, high level of integration, compactness and ultraaffordability.
HandyTone-486 User Manual Grandstream Networks, Inc. Installation 2 HandyTone-486 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services. The HandyTone-486 VoIP functionalities are available via a regular analog telephone. The following photo illustrates the appearance of a HandyTone-486.
HandyTone-486 User Manual Grandstream Networks, Inc. Following are the steps to install a HandyTone-486: 1. Connect a standard touch-tone analog telephone (or fax machine) to PHONE port. 2. Connect a PSTN telephone line to LINE port (optional). 3. Insert the Ethernet cable into the WAN port of HandyTone-486 and connect the other end of the Ethernet cable to an uplink port (a router or a modem, etc.) 4. Connect a PC to the LAN port of HandyTone-486. 5.
HandyTone-486 User Manual 3 Grandstream Networks, Inc. What is Included in the Package The HandyTone-486 package contains: 1) One HandyTone-486 2) One universal power adaptor 3) One Ethernet cable 3.1 Safety Compliances The HandyTone-486 is compliant with various safety standards including FCC/CE and C-tick. Its power adaptor is compliant with UL standard. The HandyTone-486 should only operate with the universal power adaptor provided in the package. 3.
HandyTone-486 User Manual Grandstream Networks, Inc. 4 4.1 • • • • • • • • • • • • • • • • • • • • Product Overview Key Features Supports SIP 2.0(RFC 3261), TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS, DHCP (both client and server), NTP, PPPoE, STUN, TFTP, etc. Built-in router, NAT, Gateway and DMZ port forwarding.
HandyTone-486 User Manual 4.2 Grandstream Networks, Inc. Hardware Specification The table below lists the hardware specification of HandyTone-486. Model HandyTone-486 LAN interface WAN interface FXS telephone port PSTN port Button LED Universal Switching Power Adaptor 1xRJ45 10Base-T 1xRJ45 10Base-T 1xFXS 1x PSTN pass through or life line port 1 Green and red color Input: 100-240VAC 50-60 Hz Output: +5VDC, 1200mA, UL certified 70mm (W) 130mm (D) 27mm (H) 0.6lbs (0.
HandyTone-486 User Manual Grandstream Networks, Inc. 5 5.1 Basic Operations Get Familiar with Key Pad and Voice Prompt HandyTone-486 stores a voice prompt menu (Interactive Voice Response or IVR) for quick browsing and simple configuration. To enter this voice prompt menu, simply press the button on the HandyTone-486 or pick up the phone and dial “***”. The following table shows how to use the voice prompt menu to configure the device.
HandyTone-486 User Manual Grandstream Networks, Inc. 16 17 Firmware Version Firmware Upgrade 47 “Direct IP Calling” 99 “RESET” “Invalid Entry” Firmware version information. Firmware upgrade mode. Enter “9” to rotate among the following three options: - always check - check when pre/suffix changes - never upgrade When entered, user will be prompted a dial tone, dial a 12-digit IP address to make a direct IP call. (For details, see “4.2.2 Make a Direct IP Call”.
HandyTone-486 User Manual Grandstream Networks, Inc. rule to dial 16266667890 as if you were calling from a regular analog phone, followed by pressing the # or wait for 4 seconds. 5.2.2 Direct IP calls Direct IP calling allows two parties, that is, a HandyTone with an analog phone and another VoIP Device, to talk to each other in an ad hoc fashion without a SIP proxy. This kind of VoIP calls can be made between two parties if: • • • Both HandyTone ATA and other VoIP Device(i.e.
HandyTone-486 User Manual 5.2.5 Grandstream Networks, Inc. Call Transfer 5.2.5.1 Blind Transfer Assuming that call party A and B are in conversation. A wants to Blind Transfer B to C: 1. A presses “FLASH” on the analog phone ( or Hook Flash for old model phones) to get a dial tone. 2. A dials *87 followed by C’s number, then #(or wait for 4 seconds) 3. A can hang up. NOTE: “Enable Call Feature” has to be set to “Yes” in web configuration page.
HandyTone-486 User Manual 5.2.6 Grandstream Networks, Inc. 3-way Conferencing HandyTone-496 supports 3-way conference in two styles: star code style or Bellcore style. 5.2.6.1 Star Code Style 3-way Conference Assuming that call party A and B are in conversation. A wants to bring C in a conference: 1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone. 2. A dials *23 then C’s number then # (or wait for 4 seconds). 3.
HandyTone-486 User Manual Key *23 *87 *30 *31 *67 *82 *50 *51 *70 *71 *72 *73 *90 *91 *92 *93 Flash/Hook 5.4 Grandstream Networks, Inc. Call Features 3-way conference Blind Transfer Block CallerID (for all-config change) Send CallerID (for all-config change) Block CallerID (per call) Send CallerID (per call) Disable Call Waiting (for all-config change) Enable Call Waiting (for all-config change) Disable Call Waiting. (Per Call) Enable Call Waiting (Per Call) Unconditional Call Forward.
HandyTone-486 User Manual 5.5 Grandstream Networks, Inc. LED Light Pattern Indication Following are the LED light pattern indications.
HandyTone-486 User Manual Grandstream Networks, Inc. Configuration Guide 6 6.1 Configuring HandyTone-486 through Voice Prompt 6.1.1 DHCP Mode Follow section 5.1 with voice menu option 01 to enable HandyTone-486 to use DHCP. 6.1.2 STATIC IP Mode Follow section 5.1 with voice menu option 01 to enable HandyTone-486 to use STATIC IP mode, then use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway, and DNS server respectively. 6.1.3 Firmware Server IP Address Follow section 5.
HandyTone-486 User Manual 6.2 Grandstream Networks, Inc. Configuring HandyTone-486 with Web Browser HandyTone-486 has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow a user to configure the HandyTone-486 through a Web browser such as Microsoft’s IE and AOL’s Netscape. 6.2.
HandyTone-486 User Manual Grandstream Networks, Inc. Grandstream Device Configuration Password Login All Rights Reserved Grandstream Networks, Inc. 2005 The password is case sensitive with a maximum length of 25 characters. The factory default password for End User and administrator is “123” and “admin” respectively. Only administrator can get access to “ADVANCED SETTINGS” configuration page.
HandyTone-486 User Manual Time Zone: Daylight Savings Time: Grandstream Networks, Inc. IP Address: 192 Subnet Mask: 255 Default Router: 192 DNS Server 1: 192 DNS Server 2: 0 168 . . 255 . . 168 . . 168 . . 0 . . 1 . 255 1 . . 1 . 0 .
HandyTone-486 User Manual Grandstream Networks, Inc. End User Password This field contains the password to access the Web Configuration Menu. The password is case sensitive with a maximum of 25 characters. Web Port This is the device’s internal HTTP server port. Default is 80.
HandyTone-486 User Manual Daylight Savings Time Grandstream Networks, Inc. This parameter controls whether the displayed time will be daylight savings time or not. If set to “Yes” and the Optional Rule is empty, then the displayed time will be 1 hour ahead of normal time. The “Automatic Daylight Saving Time Rule” shall have the following syntax: start-time;end-time;saving Both start-time and end-time have the same syntax: month,day,weekday,hour,minute month: 1,2,3,..,12 (for Jan, Feb, ..
HandyTone-486 User Manual Grandstream Networks, Inc. Cloned WAN MAC Address: Allow user to set a specific MAC address. Set in Hex format. LAN Subnet Mask Sets the LAN subnet mask. Default value is 255.255.255.0. If bridge mode is selected, the LAN settings have no effect. LAN DHCP Base IP: Base IP for the LAN port, which functions as a gateway for its LAN. Default value is 192.168.2.1 DHCP IP Lease Time The amount of time that a given IP address will be valid for a LAN client.
HandyTone-486 User Manual Grandstream Networks, Inc. Total SIP Message Received: Total RTP Packet Sent: Total RTP Packet Received: Total RTP Packet Loss: 13 0 0 0 All Rights Reserved Grandstream Networks, Inc. 2005 MAC Address The device ID, in HEX format. troubleshooting. WAN IP Address This field shows WAN port IP address. Product Model This field contains the product model info, such as HT486 Rev:2.0 Software Version Program: This is the main software release.
HandyTone-486 User Manual Grandstream Networks, Inc. To login to the Advanced User Configuration page, please follow the instructions in section 6.2.1 to get to the following login page. The password is case sensitive and the factory default password for Advanced User is “admin”. Advanced User configuration includes not only the end user configuration, but also advanced configuration such as SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous configuration.
HandyTone-486 User Manual Voice Frames per TX: Grandstream Networks, Inc. 2 Fax Mode: Layer 3 QoS: (up to 10/20/32/64 for G711/G726/G723/other codecs respectively) T.38 (Auto Detect) 48 (Diff-Serv or Precedence value) Layer 2 QoS (VoIP): 802.1Q/VLAN Tag 0 Layer 2 QoS (PC): 802.
HandyTone-486 User Manual Enable Call Features: Grandstream Networks, Inc. No locally) Use Bell-style 3-way Conference: Disable Call-Waiting: Send DTMF: DTMF Payload Type: FXS Impedance: Caller ID Scheme: Onhook Voltage: Yes via RTP (RFC2833) via SIP INFO Yes (Flash will be sent as a DTMF event if set to Yes) 800 ms 600 Ohm (North America) Bellcore (North America) 36V No Yes (reverse polarity upon call establishment and termination) time.nist.
HandyTone-486 User Manual Grandstream Networks, Inc. and Provisioning: Firmware Server Path: fm.grandstream.com/gs fm.grandstream.
HandyTone-486 User Manual Grandstream Networks, Inc. Admin Password Administrator password. Only administrator can configure the “Advanced Settings” page. Password field is purposely left blank for security reason after user clicks UPDATE button. This field is case sensitive and the maximum password length is 25 characters. SIP Server IP address or Domain name provided by VoIP service provider Outbound Proxy IP address or Domain name of Outbound Proxy, or Media Gateway, or Session Border Controller.
HandyTone-486 User Manual Grandstream Networks, Inc. Voice Frames per TX This field contains the number of voice frames transmitted in a single packet. When setting this value, the user should be aware of the requested packet time (used in SDP message) as a result of configuring this parameter. This parameter is associated with the first codec in the above codec Preference List or the actual used payload type negotiated between the 2 conversation parties at run time. e.g.
HandyTone-486 User Manual Grandstream Networks, Inc. Early Dial Default is “No”. Use only if proxy supports 484 response. Allow outgoing call without Registration Default is “No”. When set to “Yes”, the device still has a dial tone and allows user make outgoing calls even if the device is not registered to the SIP proxy. Dial Plan Prefix Sets the prefix added to each dialed number. No Key Entry timeout Default is 4 seconds.
HandyTone-486 User Manual Grandstream Networks, Inc. Offhook Auto-Dial This parameter allows a user to configure a User ID or extension number to be automatically dialed upon offhook. Please note that only the user part of a SIP address needs to be entered here. The HandyTone ATA will automatically append the “@” and the host portion of the corresponding SIP address.
HandyTone-486 User Manual Send Anonymous Grandstream Networks, Inc. If this parameter is set to “Yes”, user ID will be sent as anonymous, essentially blocks the Caller ID from displaying. Anonymous Method Allows displayed Caller ID to be taken from Privacy Header or From Header. Time to Ring The duration of ringing when a call is not answered. Default is 60 seconds. Special Features Default is Standard.
HandyTone-486 User Manual Session Expiration Grandstream Networks, Inc. Grandstream implemented SIP Session Timer. The session timer extension enables SIP sessions to be periodically “refreshed” via a re-INVITE request. Once the session interval expires, if there is no refresh via a re-INVITE message, the session will be terminated. Session Expiration is the time (in seconds) at which the session is considered timed out, if no successful session refresh transaction occurs beforehand.
HandyTone-486 User Manual Grandstream Networks, Inc. Automatic Upgrade Default is “Yes”. Firmware Key For firmware encryption. It should be 32 digit in Hexadecimal Representation. End user should keep it blank. Authenticate Conf File Default is “No”. If set to “Yes”, configuration file would be authenticated before acceptance. End user should use default setting. Lock keypad update If this parameter is set to “Yes”, except for IVR MENU items 1 to 5, the configuration update via keypad is disabled.
HandyTone-486 User Manual 6.2.5 Grandstream Networks, Inc. Rebooting the HandyTone-486 from remote The user/administrator of the HandyTone-486 can remotely reboot the HandyTone-486 by pressing the “Reboot” button at the bottom of the configuration page. Once done, the following screen will be displayed to indicate that rebooting is underway. Grandstream Device Configuration The device is rebooting now... You may relogin by clicking on the link below in 30 seconds.
HandyTone-486 User Manual Grandstream Networks, Inc. 7 Software Upgrade Software upgrade can be done via either TFTP or HTTP. The corresponding configuration settings are in the ADVANCED SETTINGS configuration page. 7.1 Firmware Upgrade through TFTP/HTTP To upgrade via TFTP or HTTP, the “Firmware Upgrade and Provisioning upgrade via” field (IVR option 17) needs to be set to TFTP or HTTP, respectively.
HandyTone-486 User Manual Grandstream Networks, Inc. the TFTP server is connected to the device’s LAN port, the firmware upgrade will not work by design. 7.2 Configuration File Download Grandstream SIP Device can be configured via Web Interface as well as via Configuration File through TFTP or HTTP. “Config Server Path” is the TFTP or HTTP server path for configuration file. It needs to be set to a valid URL, either in FQDN or IP address format.
HandyTone-486 User Manual 8 Grandstream Networks, Inc. Restore Factory Default Setting Warning !!! Restore the Factory Default Setting will DELETE all configuration information of the device. Please backup or print out all the settings before you approach to following steps. Grandstream will not take any responsibility if you lose all the parameters of setting and cannot connect to your service provider.
HandyTone-486 User Manual Grandstream Networks, Inc. 9 Glossary of Terms ADSL Asymmetric Digital Subscriber Line: Modems attached to twisted pair copper wiring that transmit from 1.5 Mbps to 9 Mbps downstream (to the subscriber) and from 16 kbps to 800 kbps upstream, depending on line distance. AGC Automatic Gain Control, is an electronic system found in many types of devices.
HandyTone-486 User Manual Grandstream Networks, Inc. divided into 24 time slots of 10ms, and twelve full-duplex accesses per carrier, for a total of 120 possible combinations. A DECT base station (an RFP, Radio Fixed Part) can transmit all 12 possible accesses (time slots) simultaneously by using different frequencies or using only one frequency. All signaling information is transmitted from the RFP within a multiframe (16 frames).
HandyTone-486 User Manual Grandstream Networks, Inc. FXS Foreign eXchange Station An FXS device has hardware to generate the ring signal to the FXO extension (usually an analog phone). An FXS device will allow any FXO device to operate as if it were connected to the phone company. This makes your PBX the POTS+PSTN for the phone. The FXS Interface connects to FXO devices (by an FXO interface, of course).
HandyTone-486 User Manual Grandstream Networks, Inc. format and compression/translation of the signal into Internet protocol (IP) packets for transmission over the Internet or other packet-switched networks; the process is reversed at the receiving end. The terms IP Telephony and Internet Telephony are often used to mean the same; however, they are not 100 per cent interchangeable, since Internet is only a subcase of packet-switched networks.
HandyTone-486 User Manual Grandstream Networks, Inc. i.e. the phone service we use for every ordinary phone call, or called POT (Plain Old Telephone), or circuit switched network. RTCP Real-time Transport Control Protocol, defined in RFC 3550, a sister protocol of the Real-time Transport Protocol (RTP), It partners RTP in the delivery and packaging of multimedia data, but does not transport any data itself.
HandyTone-486 User Manual Grandstream Networks, Inc. another. UDP does not provide the reliability and ordering guarantees that TCP does; datagrams may arrive out of order or go missing without notice. However, as a result, UDP is faster and more efficient for many lightweight or time-sensitive purposes. VAD Voice Activity Detection or Voice Activity Detector is an algorithm used in speech processing wherein, the presence or absence of human speech is detected from the audio samples.
