Disc Grinder Winkelschleifer Meuleuse Smerigliatrice angolare Haakse slijpmachine Amoladora angular Rebarbadora °ˆÓÈ·Îfi˜ ÙÚÔ¯fi˜ ÏÂÈ¿ÓÛˆ˜/ÎÔ‹˜ G 18SH2 • G 18U2 • G 23SF2 • G 23U2 G 18SR • G 18SRU • G 23SR • G 23SRU G23SF2 Read through carefully and understand these instructions before use. Diese Anleitung vor Benutzung des Werkzeugs sorgfältig durchlesen und verstehen. Lire soigneusement et bien assimiler ces instructions avant usage. Prima dell’uso leggere attentamente e comprendere queste istruzioni.
3 1 G18SR • G23SR • G18SRU • G23SRU 32 1 15 – 30° A D C B 4 5 A B 4 6 G18SH2 • G18U2 • G23SF2 • G23U2 I 7 8 J a 22.5 mm 9 J a K 61 6.5 mm L 89 8.
English Deutsch Français Italiano 1 Brush cover Bürstenabdeckung 2 Socket for side handle Sockel für Seitengriff 3 4 5 6 7 8 9 0 A B C D E F G Push button (Spindle lock) Spindle Screw Wheel guard Wheel washer Depressed center wheel Wheel nut Wrench Hexagonal bar wrench Side handle Lock button Switch Lever Set piece Screw Spindel Schraube Schutzhaube Unterlegscheibe Schleifscheibe Mutter für die Schleifscheibe Schlüssel Sechskantinnenschlüssel Handgriff Sperrknopf Schalter Hebel Stellstück Schrau
5 6 7 Nederlands Borstel-afdekking Bevestigingspunt voor zijhandgreep Drukknop (as-vergrendeling) As Schroef Beschermkap Onderlegschijf Português Protetor da escova Rosca para a Rosca para el asa lateral empunhadeira lateral Botón pulsador Botão de pressão (bloqueo del eje) (Bloqueio do eixo) Eje Eixo Tornillo Parafuso Cubierta protectora de muela Proteção de roda Arandela molar Porca de roda 8 Slijpschijf Muela de alisado Esmeril Ελληνικά Κάλυµµα ψήκτρας Υποδοχή για τη πλευρική λαβή Κουµπί ώθησης
Symbols WARNING The following show symbols used for the machine. Be sure that you understand their meaning before use. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Symbole WARNUNG Die folgenden Symbole werden für diese Maschine verwendet. Achten Sie darauf, diese vor der Verwendung zu verstehen. Lesen Sie sämtliche Sicherheitshinweise und Anweisungen durch.
English GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
English SAFETY WARNINGS COMMON FOR GRINDING OR ABRASIVE CUTTING-OFF OPERATIONS a) This power tool is intended to function as a grinder or cut-off tool. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. b) Operations such as sanding, wire brushing or polishing are not recommended to be performed with this power tool.
English c) Do not position your body in the area where power tool will move if kickback occurs. Kickback will propel the tool in direction opposite to the wheel’s movement at the point of snagging. d) Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback. e) Do not attach a saw chain woodcarving blade or toothed saw blade.
English SPECIFICATIONS Model G18SH2 • G18SR G18U2 • G18SRU Voltage (by areas)*1 Input*1 G23U2 • G23SRU 2000 W 8500 min-1 (/min) No-load speed Outer dia. Wheel G23SF2 • G23SR (110 V, 220 V, 230 V, 240 V) 6600 min-1 (/min) 180 mm 230 mm Inner dia. 22.23 mm Peripheral speed 80 m/s Weight*2 4.3 kg Starting current limiter*3 No Yes No Yes *1 Be sure to check the nameplate on product as it is subject to change by areas.
English PRACTICAL GRINDER APPLICATION 1. Pressure To prolong the life of the machine and ensure a first class finish, it is important that the machine should not be overloaded by applying too much pressure. In most applications, the weight of the machine alone is sufficient for effective grinding. Too much pressure will result in reduced rotational speed, inferior surface finish, and overloading which could reduce the life of the machine. 2.
English (3) Use the auxiliary hexagonal wrench or small screwdriver to return the edge of the spring to the head of the carbon brush. (4) Mount the tail cover and tighten the D4 tapping screw. G18SR • G18SRU • G23SR • G23SRU Disassemble the brush cap with a slotted-head screwdriver. The carbon brush can then be easily removed. 5. Maintenance of the motor The motor unit winding is the very “heart” of the power tool. Exercise due care to ensure the winding does not become damaged and/or wet with oil or water.
Deutsch ALLGEMEINE SICHERHEITSHINWEISE FÜR ELEKTROGERÄTE WARNUNG Lesen Sie sämtliche Sicherheitshinweise und Anweisungen durch Wenn die Warnungen und Anweisungen nicht befolgt werden, kann es zu Stromschlag, Brand und/oder ernsthaften Verletzungen kommen. Bitte bewahren Sie alle Warnhinweise und Anweisungen zum späteren Nachschlagen auf. Der Begriff „Elektrowerkzeug“ bezieht sich in den Warnhinweisen auf Elektrowerkzeuge mit Netz- (schnurgebunden) oder Akkubetrieb (schnurlos).
Deutsch Bei Beschädigungen lassen Sie das Elektrowerkzeug reparieren, ehe Sie es benutzen. Viele Unfälle mit Elektrowerkzeugen sind auf schlechte Wartung zurückzuführen. f) Halten Sie Schneidwerkzeuge scharf und sauber. Richtig gewartete Schneidwerkzeuge mit scharfen Schneidkanten bleiben weniger häufig hängen und sind einfacher zu beherrschen.
Deutsch m) Lassen Sie das Elektrowerkzeug nicht laufen, während Sie es tragen. Der sich drehende Schleifkörper kann bei versehentlicher Berührung Ihre Kleidung erfassen und in Ihren Körper gezogen werden. n) Reinigen Sie regelmäßig die Lüftungsöffnungen des Elektrowerkzeugs. Das Motorgebläse zieht Staub in das Gehäuse. Übermäßige Ansammlungen von Metallstaub könnten zu elektrischen Gefährdungen führen. o) Verwenden Sie das Elektrowerkzeug nicht in der Nähe entflammbarer Materialien.
Deutsch b) Meiden Sie den Bereich vor und hinter der rotierenden Trennscheibe. Bewegt sich die Trennscheibe im Werkstück von Ihnen weg, so kann im Falle eines Rückschlags das Elektrowerkzeug mit der sich drehenden Scheibe direkt auf Sie zugeschleudert werden. c) Falls die Trennscheibe verklemmt oder Sie die Arbeit aus irgendeinem Grund unterbrechen müssen, schalten Sie das Elektrowerkzeug aus und halten Sie es an derselben Stelle, bis die Scheibe völlig zum Stillstand gekommen ist.
Deutsch ANWENDUNGSGEBIETE 䡬 Entfernung von Gußgrat und Endbearbeitung verschiedener Stahlqualitäten, Bronze-und Aluminiummaterialien und Gußteile. 䡬 Schleifen von geschweißten Stücken oder von durch Brennschneiden hergestellten Abschnitten. 䡬 Schleifen von Kunstharz, Schiefer, Ziegelstein, Marmor, usw. 䡬 Beim Schneiden von synthetischem Zement, Steinen, Mauersteinen, Marmor und ähnlichen Materialien. VOR INBETRIEBNAHME 1.
Deutsch ACHTUNG: 䡬 Überprüfen Sie, daß das Werkstück richtig unterstützt ist. 䡬 Überprüfen Sie bei Arbeit an einem staubigen Ort, daß die Ventilationsöffnungen freigehalten werden. Wenn Beseitigung von Staub erforderlich werden sollte, so ziehen Sie zuerst den Stecker des Netzkabels aus der Steckdose (verwenden Sie nichtmetallische Gegenstände) und vermeiden Sie Beschädigung innerer Teile. 䡬 Stellen Sie sicher, daß bei der Verwendung auftretende Funken keine Gefährdung darstellen, d.h.
Deutsch MODIFIKATIONEN: Hitachi-Elektrowerkzeuge werden fortwährend verbessert und modifiziert, um die neuesten technischen Fortschritte einzubauen. Dementsprechend ist es möglich, daß einige Teile (z.B. Codenummern bzw. Entwurf) ohne vorherige Benachrichtigung geändert werden. GARANTIE Auf Hitachi-Elektrowerkzeuge gewähren wir eine Garantie unter Zugrundelegung der jeweils geltenden gesetzlichen und landesspezifischen Bedingungen.
Français AVERTISSEMENTS DE SÉCURITÉ GÉNÉRAUX CONCERNANT LES OUTILS ÉLECTRIQUES AVERTISSEMENT Lire tous les avertissements de sécurité et toutes les instructions. Tout manquement à observer ces avertissements et instructions peut engendrer des chocs électriques, des incendies et/ou des blessures graves. Conservez tous les avertissements et toutes les instructions pour vous y référer ultérieurement.
Français f) Maintenir les outils coupants aiguisés et propres. Des outils coupants bien entretenus avec des bords aiguisés sont moins susceptibles de se coincer et plus simples à contrôler. g) Utiliser l'outil électrique, les accessoires et les mèches de l'outil, etc. conformément à ces instructions en tenant compte des conditions d'utilisation et du travail à réaliser. L'utilisation de l'outil électrique pour des opérations différentes de celles pour lesquelles il a été conçu est dangereuse.
Français RECUL DE L'APPAREIL ET AVERTISSEMENTS ASSOCIÉS Le recul est une réaction soudaine provoquée par le pincement ou le coincement d'une meuleuse, d'une plaque, d'une brosse ou autre type d'accessoire. L'accessoire en rotation cale alors rapidement, ce qui projette l'outil électrique dans la direction opposée à la rotation de l'accessoire.
Français PRECAUTIONS D’UTILISATION DE LA MEULEUSE 5. 1. 6. 2. 3. 4. Ne jamais faire fonctionner ces outils sans couvremeules. Vérifier que la vitesse indiquée sur la meule est égale ou supérieure à la vitesse nominale de la meuleuse. N’utiliser que les meules à partie centrale creusée et vitesse nominale égale ou supérieure à 80 m/s. Vérifier que les dimensions de la meule sont compatibles avec la meuleuse et que la meule est adaptée à la broche.
Français 䡬 Refermer le levier et le fixer. Si et quand cela est nécessaire, effectuer les réglages en serrant ou desserrant la vis. 䡬 Si le levier ne bouge pas facilement, appliquer un peu d’huile de graissage sur la section coulissante entre la pièce fixée et le levier. 䡬 Fixer le carter de protection à l’endroit où l’aplat de la tige de positionnement du carter de protection s’aligne sur l’aplat de la masse de garniture (l’endroit où le carter de protection est inséré), mais ne pas l’utiliser. 5.
Français 3. Contrôle des balais en carbone (Fig. 4) Le moteur utilise des balais en carbone qui sont des pièces qui s’usent. Quand ils sont usés ou près de la “limite d’usure”, il pourra en résulter un mauvais fonctionnement du moteur. Quand le moteur est équipé d’un balai en carbone à arrêt automatique, il s’arrêtera automatiquement. Remplacez alors les balais en carbone par des nouveaux et ayant les mêmes numéros que ceux montré sur la figure.
Italiano AVVERTIMENTI GENERALI DI SICUREZZA SUGLI UTENSILI ELETTRICI AVVERTENZA Leggere tutti gli avvertimenti di sicurezza e tutte le istruzioni. La mancata osservanza degli avvertimenti e delle istruzioni potrebbe essere causa di scosse elettriche, incendi e/o gravi lesioni. Salvare tutti gli avvertimenti e le istruzioni per riferimenti futuri. Il termine “elettroutensili” riportato nelle avvertenze si riferisce agli elettroutensili azionati con alimentazione di rete (via cavi) o a batterie (senza cavi).
Italiano f) Mantenere gli strumenti di taglio affilati e puliti. Gli strumenti di taglio in condizioni di manutenzione adeguata, con bordi affilati, sono meno soggetti al bloccaggio e sono più facilmente controllabili. g) Utilizzare l'elettroutensile, gli accessori, le barrette, ecc. in conformità a quanto riportato nelle presenti istruzioni, tenendo in debita considerazione le condizioni operative e il tipo di lavoro da eseguire.
Italiano RINCULO E AVVERTIMETI CORELATI Il rinculo è una reazione improvvisa provocata da una mola rotante, platorello di supporto, spazzola o altro accessorio pinzati o impigliati. Ciò causa un rapido arresto dell’accessorio rotante che a sua volta provoca la perdita di controllo dell’utensile elettrico, costringendolo ad andare nella direzione opposta della rotazione dell’accessorio al punto di attacco.
Italiano PRECAUZIONI PER L’USO DELLA SMERIGLIATRICE ANGOLARE 1. Non far funzionare mai questo utensile elettrico senza il carter della mola. 2. Controllare che la velocità indicata sulla mola sia uguale o maggiore della velocità nominale della molatrice. Usare solo ruote centrali concave con una velocità di sicurezza di almeno 80 m/s. 3. Assicurarsi che le dimensioni della mola siano compatibili con la molatrice e che la mola si inserisca nel mandrino. 4.
Italiano 䡬 Chiudere la leva e fissarla. Se e quando è necessario, eseguire le regolazioni serrando o allentando la vite. 䡬 Se la leva non si sposta in modo uniforme, applicare dell’olio lubrificante alla sezione scorrevole tra il pezzo di arresto e la leva. 䡬 Fissare il pararuota alla posizione dove le piastre trasversali del perno di posizionamento pararuota e la massa di imballaggio sono allineate (la posizione in cui il pararuota è inserito), ma non usarlo. 5.
Italiano 3. Controllo della spazzola di carbone (Fig. 4) Il motore impiega spazzola di carbone, materiali soggeti a consumo. Quando una spazzola è consumata o vicina al “limite d’usura”, il motore potrebbe subire dei danni. Usando spazzole di carbone con arresto automatico, il motore si ferma automaticamente quan do queste sono cosumate. In tal caso, bisogna sostituirle con delle nuove, dello stesso numero come indicato nella figura.
Nederlands ALGEMENE VEILIGHEIDSWAARSCHUWINGEN VOOR ELEKTRISCH GEREEDSCHAP WAARSCHUWING Lees alle waarschuwingen en instructies aandachtig door. Nalating om de waarschuwingen en instructies op te volgen kan in een elektrische schok, brand en/of ernstig letsel resulteren. Bewaar alle waarschuwingen en aanwijzingen voor eventuele naslag in de toekomst.
Nederlands Slecht onderhouden elektrisch gereedschap is verantwoordelijk voor een groot aantal doe-het-zelf ongelukken. f) Houd snijwerktuigen scherp en schoon. Goed onderhouden snijwerktuigen met scherpe snijranden lopen minder snel vast en zijn gemakkelijker in het gebruik. g) Elektrisch gereedschap, toebehoren, bits enz. moeten in overeenstemming met deze instructies worden gebruikt waarbij de werkomstandigheden en het werk in overweging moeten worden genomen.
Nederlands De ventilator van de motor trekt stof in de behuizing en een overmatige opeenhoping van metaalpoeder kan gevaar voor elektrische schokken opleveren. o) Gebruik het elektrisch gereedschap niet in de buurt van brandbare materialen. Deze materialen kunnen door vonken tot ontbranding komen. p) Gebruik geen toebehoren waarvoor een vloeibaar koelmiddel vereist is. Gebruik van water of overig vloeibaar koelmiddel kan elektrocutie of schok tot gevolg hebben.
Nederlands d) Start het snijden niet opnieuw in het werkstuk. Laat de schijf eerst op volle snelheid draaien en breng deze opnieuw voorzichtig in de snede. De schijf kan klemraken, wegspringen of terugslaan als het elektrisch gereedschap opnieuw in het werkstuk gestart wordt. e) Ondersteun panelen of een groot werkstuk om klemraken en terugslag van de schijf te voorkomen. Grote werkstukken kunnen doorzakken onder hun eigen gewicht.
Nederlands VOOR BEGIN VAN WERK 1. Netspanning Kontroleren of de netspanning overeenkomt met de opgave op het naamplaatje. 2. Netschakelaar Kontroleren of de netschakelaar op “UIT” staat. Wanneer de stekker op het net aangesloten is, terwijl de schakelaar op “AAN” staat, begint het gereedschap onmiddellijk te draaien, hetwelk ernstig gevaar betekent. 3.
Nederlands 䡬 Zorg ervoor dat eventuele vonken geen gevaar kunnen opleveren, dus bijv. geen personen kunnen raken of brandbare materialen kunnen ontsteken. 䡬 Draag altijd oog- en gehoorbescherming. Andere beschermingsmiddelen, zoals een stofmasker, handschoenen, helm en schort moeten worden gebruikt indien nodig. Bij twijfel kunt u deze beschermingsmiddelen het beste gebruiken. 䡬 Wanneer de machine niet gebruikt wordt, moet de stekker uit het stopcontact getrokken worden.
Nederlands GARANTIE De garantie op het elektrisch gereedschap van Hitachi is in overeenstemming met de wettelijke/landspecifieke richtlijnen. Deze garantie dekt geen defecten of schade als gevolg van foutief gebruik, misbruik of normale slijtage. In geval van klachten verzoeken wij u het elektrisch gereedschap samen met het GARANTIECERTIFICAAT dat u achterin deze handleiding aantreft naar een erkend servicecentrum van Hitachi te sturen.
Español ADVERTENCIAS DE SEGURIDAD GENERAL DE LA HERRAMIENTA ELÉCTRICA ADVERTENCIA Lea todas las instrucciones y advertencias de seguridad. Si no se siguen las advertencias e instrucciones, podría producirse una descarga eléctrica, un incendio y/o daños graves. Guarde todas las advertencias e instrucciones para futura referencia.
Español Se producen muchos accidentes por no realizar un mantenimiento correcto de las herramientas eléctricas. f) Mantenga las herramientas de corte afiladas y limpias. Las herramientas de corte correctamente mantenidas con los bordes de corte afilados son más fáciles de controlar. g) Utilice la herramienta eléctrica, los accesorios y las brocas de la herramienta, etc. de acuerdo con estas instrucciones, teniendo en cuenta las condiciones laborales y el trabajo que se va a realizar.
Español REBOTE Y ADVERTENCIAS RELACIONADAS El rebote es una reacción repentina a una rueda giratoria, almohadilla de soporte, cepillo u otro accesorio pinchado o enganchado. El pinchazo o enganche causa una parada rápida del accesorio giratorio que, a su vez, hace que la herramienta eléctrica no controlada vaya en la dirección opuesta del giro del accesorio en el punto de atasco.
Español PRECAUCIONES AL UTILIZAR LA AMOLADORA ANGULAR 1. Nunca trabajar con estas herramientas eléctricas sin cubiertas protectoras de la muela. 2. Compruebe que la velocidad marcada en la muela sea igual o mayor que la velocidad nominal de la amoladora. Emplee sólo muelas de centro hundido con una velocidad nominal de 80 m/s o más. 3. Compruebe que las dimensiones de la muela sean compatibles con la amoladora y que la muela encaja en el husillo. 4.
Español 4. Montar y ajustar la cubierta protectora de muela La cubierta protectora de muela es un dispositivo protector para evitar heridas, en caso de que la muela de alisado se quiebre durante la operación. Asegurarse de que la cubierta protectora esté bién montada y apretada antes de comenzar con la operación de alisado. [En caso del cubremuelas mostrado en la Fig.
Español MONTAJE Y DESMONTAJE DE LA MUELA ALISADO PRECAUCIÓN: Cerciórese de desconectar la alimentación y desenchufe el enchufe de la toma de alimentación de la red para evitar averías serias. 1. Montaje (Fig. 1) (1) Volver la máquina boca abajo de tal manera que el eje esté mirando hacia arriba. (2) Montar la arandela molar en el eje. (3) Montar la protuberancia de la muela de alisado en la arandela molar. (4) Atornillar la contratuerca molar en el eje.
Español Información sobre el ruido propagado por el aire y vibración Los valores medidos se determinaron de acuerdo con EN60745 declararon de conformidad con ISO 4871. Medición del nivel de potencia de sonido ponderado A: 101 dB (A) Medición del nivel de presión de sonido ponderado A: 90 dB (A) Duda KpA: 3 dB (A) Utilice protectores para los oídos. El valor de aceleración cuadrática media de raíz ponderada típica no supera los 2,5 m/s2.
Português AVISOS GERAIS DE SEGURANÇA PARA A FERRAMENTA ELÉCTRICA AVISO Leia todas as instruções e avisos de segurança. Se não seguir todas as instruções e os avisos, pode provocar um choque eléctrico, incêndio e/ou ferimentos graves. Guarde todos os avisos e instruções para referência futura. O termo “ferramenta eléctrica” em todos os avisos refere-se à sua ferramenta ligada à corrente (com fios) ou à ferramenta eléctrica a baterias (sem fios).
Português g) Utilize a ferramenta eléctrica, acessórios e pontas de ferramentas, etc., de acordo com estas instruções, tomando em consideração as condições de trabalho e o trabalho a ser efectuado. A utilização de uma ferramenta eléctrica para operações diferentes das concebidas pode resultar num mau funcionamento. 5) Manutenção a) Faça a manutenção da sua ferramenta eléctrica por um pessoal de reparação qualificado e utilize apenas peças de substituição idênticas.
Português REACÇÃO ENERGÉTICA E AVISOS RELACIONADOS A reacção energética é uma reacção repentina a um disco rotativo, disco de respaldo, escova ou qualquer outro acessório que seja apertado ou puxado. A acção de apertar ou puxar causa um rápido retardamento do acessório rotativo, o que, por sua vez, faz com que a ferramenta eléctrica não controlada seja forçada na direcção oposta da rotação do acessório no ponto de ligação.
Português PRECAUÇÕES NO USO DA REBARBADORA 1. Nunca acione estas ferramentas elétricas sem os protetores de esmeril. 2. Verifique se a velocidade marcada no disco é igual ou superior à velocidade nominal da rebarbadora. Utilize apenas o esmeril que estiver calibrado para 80 m/s ou mais. 3. Assegure-se de que as dimensões do esmeril são compatíveis com as da rebarbadora e de que o esmeril cabe no eixo. 4.
Português 䡬 Gire, então, a proteção de roda até a posição desejada (para o uso). 䡬 Feche a alavanca e prenda-a. Se, ou quando, necessário, faça ajustes apertando ou afrouxando o parafuso. 䡬 Caso a alavanca não se movimente com facilidade, passe um óleo lubrificante na seção deslizante entre a peça de ajuste e a alavanca.
Português MANUTENÇÃO E INSPEÇÃO 1. Inspeção do esmeril Certifique-se de que o esmeril está livre de fissuras e defeitos na superfície. 2. Inspeção dos parafusos de montagem Inspecione regularmente todos os parafusos de montagem e se certifique de que estão corretamente apertados. Se algum deles estiver frouxo, reaperteo imediatamente. Caso isso não seja feito, pode resultar em perigo grave. 3. Inspeção das escovas de carvão (Fig. 4) O motor emprega escovas de carvão que são peças de consumo.
∂ÏÏËÓÈο °∂¡π∫∂™ ¶ƒ√∂π¢√¶√π∏™∂π™ ∞™º∞§∂π∞™ ∏§∂∫∆ƒπ∫√À ∂ƒ°∞§∂π√À ¶ƒ√™√Ã∏ ¢È·‚¿˙ÂÙ fiϘ ÙȘ ÚÔÂȉÔÔÈ‹ÛÂȘ ·ÛÊ·Ï›·˜ Î·È fiϘ ÙȘ Ô‰ËÁ›Â˜. Η µη τήρηση των προειδοποιήσεων και οδηγιών µπορεί να προκαλέσει ηλεκτροπληξία, πυρκαγιά και/ή σοβαρ τραυµατισµ . b) º˘Ï¿ÍÙ fiϘ ÙȘ ÚÔÂȉÔÔÈ‹ÛÂȘ Î·È ÙȘ Ô‰ËÁ›Â˜ ÁÈ· ÌÂÏÏÔÓÙÈ΋ ·Ó·ÊÔÚ¿.
∂ÏÏËÓÈο e) ™˘ÓÙËÚ›Ù ٷ ËÏÂÎÙÚÈο ÂÚÁ·Ï›·. ¡· ÂϤÁ¯ÂÙ ÙËÓ Â˘ı˘ÁÚ¿ÌÌÈÛ‹ ÙÔ˘˜ ‹ ÙÔ ÌÏÔοÚÈÛÌ· ÙˆÓ ÎÈÓÔ‡ÌÂÓˆÓ ÌÂÚÒÓ, ÙË ıÚ·‡ÛË ÙˆÓ ÂÍ·ÚÙËÌ¿ÙˆÓ Î·È ÔÔÈ·‰‹ÔÙ ¿ÏÏË Î·Ù¿ÛÙ·ÛË Ô˘ ÂÓ‰¤¯ÂÙ·È Ó· ÂËÚ¿ÛÂÈ ÙË ÏÂÈÙÔ˘ÚÁ›· ÙÔ˘ ËÏÂÎÙÚÈÎÔ‡ ÂÚÁ·Ï›Ԣ. ™Â ÂÚ›ÙˆÛË ‚Ï¿‚˘, ÙÔ ËÏÂÎÙÚÈÎfi ÂÚÁ·ÏÂ›Ô Ú¤ÂÈ Ó· ÂÈÛ΢·ÛÙ› ÚÈÓ ¯ÚËÛÈÌÔÔÈËı›. Πολλά ατυχήµατα προκαλούνται απ ηλεκτρικά εργαλεία που δεν έχουν συντηρηθεί σωστά. f) ¢È·ÙËÚ›Ù ٷ ÂÚÁ·Ï›· ÎÔ‹˜ ÎÔÊÙÂÚ¿ Î·È Î·ı·Ú¿.
∂ÏÏËÓÈο o) ªËÓ ¯ÚËÛÈÌÔÔț٠ÙÔ ËÏÂÎÙÚÈÎfi ÂÚÁ·ÏÂ›Ô ÎÔÓÙ¿ Û ‡ÊÏÂÎÙ· ˘ÏÈο. Οι σπινθήρες µπορεί να αναφλέξουν αυτά τα υλικά. p) ªËÓ ¯ÚËÛÈÌÔÔț٠ÂÍ·ÚÙ‹Ì·Ù· Ô˘ ¯ÚÂÈ¿˙ÔÓÙ·È „˘ÎÙÈÎfi ˘ÁÚfi. Η χρήση νερού ή άλλων ψυκτικών υγρών µπορεί να προκαλέσει θανατηφ ρα ηλεκτροπληξία.
∂ÏÏËÓÈο Ο τροχ ς µπορεί να "κολλήσει", να µετατοπιστεί ή να λακτίσει, εάν θέσετε το εργαλείο σε λειτουργία ταν βρίσκεται µέσα στο υλικ που επεξεργάζεστε. e) ™ÙËÚ›ÍÙ ÙȘ ÂÈÊ¿ÓÂȘ ‹ ÔÔÈÔ‰‹ÔÙ ˘ÂÚÌÂÁ¤ı˜ ˘ÏÈÎfi ÁÈ· ÙËÓ ÂÏ·¯ÈÛÙÔÔ›ËÛË ÙÔ˘ ÎÈÓ‰‡ÓÔ˘ Ì·ÁÎÒÌ·ÙÔ˜ ÙÔ˘ ÙÚÔ¯Ô‡ Î·È Ù˘ ÂÈÛÙÚÔÊ‹˜. Τα µεγάλα υλικά τείνουν να χαλαρώνουν υπ το βάρος τους. Πρέπει να τοποθετούνται στηρίγµατα κοντά στη γραµµή κοπής και κοντά στην άκρη του υλικού και στις δυο πλευρές του τροχού.
∂ÏÏËÓÈο 2. ¢È·ÎfiÙ˘ Ú‡̷ÙÔ˜ Βεβαιωθείτε τι ο διακ πτης ρεύµατος βρίσκεται στη θέση OFF. Αν το βίσµα είναι στη µπρίζα καθώς ο διακ πτης ρεύµατος βρίσκεται στο ΟΝ, το εργαλείο θα αρχίσει να λειτουργεί αµέσως, µε πιθαν τητα πρ κλησης σοβαρού ατυχήµατος. 3. ∫·ÏÒ‰ÈÔ ÚÔ¤ÎÙ·Û˘ 3ταν ο χώρος εργασίας βρίσκεται µακριά απ την παροχή ρεύµατος. Χρησιµοποιήστε ένα καλώδιο προέκτασης µε κατάλληλο πάχος και ικαν τητα µεταφοράς ρεύµατος. Το καλώδιο προέκτασης πρέπει να είναι τ σο κοντ σο είναι πρακτικά δυνατ . 4.
∂ÏÏËÓÈο ¶ƒ√™√Ã∏: 䡬 Ελέγξτε αν το αντικείµενο εργασίας υποστηρίζεται κατάλληλα. 䡬 Βεβαιωθείτε τι τα ανοίγµατα αερισµού διατηρούνται καθαρά κατά την διάρκεια της εργασίας σε σκονισµένες περιοχές. Αν είναι απαραίτητο να καθαρίσετε τη σκ νη, πρώτα αποσυνδέσετε το εργαλείο απ την παροχή ρεύµατος (χρησιµοποιήστε µη µεταλλικά αντικείµενα) και αποφύγετε να προκαλέσετε ζηµιά στα εσωτερικά τµήµατα.
∂ÏÏËÓÈο ∆ƒ√¶√¶√π∏™∏: Τα Ηλεκτρικά Εργαλεία Hitachi βελτιώνονται συνεχώς και τροποποιούνται για να συµπεριλάβουν τις τελευταίες τεχνολογικές προ δους. Κατά συνέπεια, ορισµένα τµήµατα (δηλ. κωδικοί αριθµοί και/ή σχεδιασµ ς) µπορούν να αλλάξουν χωρίς προηγούµενη ειδοποίηση. ∂°°À∏™∏ Εγγυώµαστε τα εργαλεία Hitachi Power Tools σύµφωνα µε τη νοµοθεσία και τους κανονισµούς ανά χώρα. Η παρούσα εγγύηση δεν καλύπτει ελαττώµατα ή ζηµιές λ γω κακής χρήσης, κακοποίησης ή φυσιολογικής φθοράς.
57 09Back_G18SH2_WE 57 4/16/10, 16:39 A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 B 315-636 301-654 306-888 320-219 320-217 320-226 320-243 320-221 320-222 630-1DD 994-208 320-220 360-558E 320-215 961-501 340-501E 937-981 939-542 320-242 949-236 320-229 630-2DD 990-852 320-234 320-228 320-227 994-192 949-760 306-124 937-907Z 937-909Z 320-218 306-890 320-241 G18SH2 • G18U2 C 2 4 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 4 1 1 1 1 1 1 1 ”7, 19" M1
58 09Back_G18SH2_WE 58 4/16/10, 16:39 A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16-1 16-2 17 18 19 20 21 22 23 24 25 26 27 28 29 30-1 30-2 31 32 33 34 35 36 37 B 315-636 301-654 306-888 320-219 320-217 320-226 320-225 320-221 320-222 630-1DD 994-208 320-220 360-558E 320-215 961-501 340-501E 340-501F 937-981 939-542 320-224 949-236 320-229 630-2DD 990-852 320-234 320-228 320-227 994-192 949-760 306-120 937-907Z 937-908Z 316-825 937-909Z 320-218 306-890 320-223 320-216 600-0VV G23SF2 • G23U2 C 2 4 1 1 1 1 1
59 09Back_G18SH2_WE 59 4/16/10, 16:39 A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 B 315-636 301-654 306-888 320-219 320-217 320-226 320-243 320-221 320-222 630-1VV 994-208 320-220 360-762E 320-215 961-501 340-664E 937-981 939-542 320-242 949-236 320-229 630-2VV 990-852 320-234 320-228 320-227 994-192 949-760 306-120 937-907Z 316-824 937-909Z 311-492 321-546 321-545 949-760 G18SR • G18SRU C 2 4 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 4 1 1
60 09Back_G18SH2_WE 60 4/16/10, 16:39 A 1 2 3 4 5 6 7 8 9 10 11 12 13-1 13-2 14 15 16-1 16-2 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 B 315-636 301-654 306-888 320-219 320-217 320-226 320-225 320-221 320-222 630-1VV 994-208 320-220 360-762C 360-762E 320-215 961-501 340-664C 340-664E 937-981 939-542 320-224 949-236 320-229 630-2VV 990-852 320-234 320-228 320-227 994-192 949-760 306-120 937-907Z 316-825 937-909Z 311-492 321-546 321-545 949-760 G23SR • G23SRU C 2 4 1 1 1 1 1 1 1 1 1 1 1
61 09Back_G18SH2_WE 61 4/16/10, 16:39
English Nederlands GARANTIEBEWIJS GUARANTEE CERTIFICATE 1 2 3 4 5 Model No. Serial No. Date of Purchase Customer Name and Address Dealer Name and Address (Please stamp dealer name and address) Deutsch 1 2 3 4 5 Español CERTIFICADO DE GARANTIA GARANTIESCHEIN 1 2 3 4 5 Modell-Nr. Serien-Nr. Kaufdaturn Name und Anschrift des Kunden Name und Anschrift des Händlers (Bitte mit Namen und Anschrift des Handlers abstempeln) Français 1 2 3 4 5 No. de modèle No.
1 2 3 4 ✄ 5 63 09Back_G18SH2_WE 63 4/16/10, 16:39
64 09Back_G18SH2_WE 64 4/16/10, 16:39
65 09Back_G18SH2_WE 65 4/16/10, 16:39
Hitachi Power Tools Europe GmbH Siemensring 34, 47877 willich 1, F. R. Germany Tel: +49 2154 49930 Fax: +49 2154 499350 URL: http://www.hitachi-powertools.de Hitachi Power Tools Netherlands B. V. Brabanthaven 11, 3433 PJ Nieuwegein, The Netherlands Tel: +31 30 6084040 Fax: +31 30 6067266 URL: http://www.hitachi-powertools.nl Hitachi Power Tools (U. K.) Ltd. Precedent Drive, Rooksley, Milton Keynes, MK 13, 8PJ, United Kingdom Tel: +44 1908 660663 Fax: +44 1908 606642 URL: http://www.hitachi-powertools.co.
Nederlands English EC DECLARATION OF CONFORMITY EC VERKLARING VAN CONFORMITEIT We declare under our sole responsibility that this product is in conformity with standards or standardized documents EN60745, EN55014 and EN61000 in accordance with Council Directives 2004/108/EC and 98/37/EC. This product also complies with the essential requirements of 2006/42/EC to be applied from 29 December 2009 instead of 98/37/EC. The European Standards Manager at Hitachi Koki Europe Ltd.