HD-SDeye Full HD HD-SDI Camera KP-HD20A Operation manual Thank you for procuring this fine Hitachi Kokusai Electric color camera. Before using the camera, please read this operation manual carefully and keep this manual on file for ready reference in the future. Hitachi Kokusai Electric Inc.
Contents Caution for safe operation Contents Introduction Features ······························· 1 ···································· 1 Standard Composition ·················· 1 Name and function························ 2 Connections·································· 3 Lens·············································· 4-5 Setting ·········································· 6-10 Specifications································ 11 Introduction Features High definition Hitachi’s camera KP-HD20A is HD-S
Name and function Attachment of C mount adapter Attachment of tripod adapter LENS mount ring Tripode adaptor installation screw hole C mount adapter (optional accessories) LENS connector [LENS] Connect the lens cable, when using automatic iris lens. Refer to page 4 (Lens connectors).
Connections Example of connection RGB monitor Supported formats XGA 60p SXGA 60p RGB cable AC100~230V HD-SDI output HD-VLC output HD-SDeye color camera KP-HD20A MU-HD101 back Coaxial cable Refer to cable length standard DC12V or Coaxial superposition DVI-D cable Coaxial cable DVI – D moronit Coaxial cable HD-SDI output HD-VLC output Analog video output for field angle adjustment NTSC/PAL monitor Supported formats 1080 59.94i 1080 50i 1080 29.
Lens Lens selection Lens connectors 1) Dimension A) of lens installation part should be according to the figure below. When the lens with dimention more than the following size is installed, the internal damage of camera may occur. 2) Please do not install a lens which is heavier than the camera body. In case of using such lens, please fix the lens to the installation stand. When a lens-connector-free automatic iris lens is used, the optional lens plug is installed in the lens cable as follows.
Note If an auto iris lens is used and the object distance is less than few meters, due to focus length of lens, slight blurring can occur at certain iris positions. In such case, please refer to page 9[Lens open setting] and set the lens to full open. At this time, AES is operated. Auto Electric Shutter (AES) AES is a function to automatically adjust the electronic shutter speed according to the amount of incident light and keeps the image level constant.
Setting Setup by the operating switch in a back part Up(U) Down(D) Right(R) Left(L) button: Movement of a cursor Center (Set) button: Determination of a selection item MENU buttons Composition of camera setting menu MAIN MENU [FILE1 ] LIGHT CONT. MENU SHUTTER :1/30 PEAK/AVE. :0/100 LEVEL : 0 ALC GATE :OFF LIGHT CONT. :-> GAIN :-> WHITE BAL. :-> SUB :-> TITLE :-> LENS SYSTEM :-> :-> SYSTEM MENU SDI OUTPUT :HD-SDI TV FORMAT :1080p,59.
MAIN MENU LIGHT CONT MENU 1) Press the Set button for at least 2 seconds to display the Main menu on the monitor screen.
GAIN MENU SUB MENU ……Chroma level setting ……Detail correction setting ……Black level setting ……Gamma correction setting ……KNEE mode setting ……KNEE function setting ……Masking mode setting ……Masking function setting ……Gain mode setting …… Fixed amplification setting …… Maximum amplification setting Gain setting 1) Press the Set button for at least 2 seconds to display the main menu on the monitor screen. 2) Select GAIN by Up (Down) button, and display GAIN MENU by Right button. (1)MODE:Set gain mode.
LENS R M LENS Y (SAT) (HUE) G ……Lens type setting ……Iris gain setting ……Lens open setting LENS TYPE :DC IRIS GAIN : 0 LENS OPEN :OFF B C L (7) INITALIZE:Initializing in the factory-shipments state for the current scene file. The following message is show after INITIALIZE command execution. Push R: INITIALIZE command cancel Push D: INITIALIZE command execution H (1) LENS TYPE:DC type or VIDEO type VIDEO : B/W MODE AUTO does not operate at the time of AGC OFF and SENSUP OFF / manual..
HD-SDI/HD-VLC mode change TV FORMAT MENU Operation:Select TV FORMAT by Up (Down) button, and press Right button. Button operation at a camera start-up (1) Starting in HD-SDI mode A power supply is started pushing an Up button. (2) Starting in HD-VLC mode ……1080i 59.94Hz ……1080i 50Hz ……1080p 29.97Hz ……1080p 25Hz A power supply is started pushing a Right button. ※Exclusive multiunit MU-HD101 is required for HD-VLC mode. (1) 1080i 59.94Hz (2) 1080i 50Hz (3)1080p 29.
Specifications 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) Imaging device Total pixels Effective pixels Sync system Video output Video format 1/3” Progressive Scan MOS 2010(H)x1108(V) 2.2M pixels 1944(H)x1092(V) 2.1M pixels Internal HD-SDI / Analog CVBS HD-SDI: 1080i 59.94/ 50, 1080P 29.